AMS Technologies AG
Munich 82152  Germany
Nov 12, 2009 FiberTECII(TM) Series laser modules integrate electronics with DC power operation for laser diode drive and protection, direct modulation of output power, and feedback functions. Units include micro lens that transforms elliptical beam into circular one, optimizing efficiency of coupling power into fiber. Various wavelength and power options are available, including 488, 532, 405, and 635 nm products. Modules suit medical, bioanalytical, and automated instrumentation.

Lumex Inc.
Palatine, IL 60067
Nov 05, 2009 Measuring 10 x 10 mm, 3 W TitanBrite(TM) LED contains three 1 W dies in red, green, and blue. Square shape is useful for applications that require optimal resolution for up-close viewing and for integration of dynamic, smaller images. RGB light allows for adjustable color tuning and can create shades of white, as well as every other color in visible spectrum. Applications include electronic signage, safety/security lighting, general illumination, and graphic backlighting.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 02, 2009 Supplied in lead-free, 2 x 2.2 mm, 5-pin SC70 package, MAX14541E protects 3-channel data interfaces from ESD spikes up to ±15 kV (Human Body Model). Input capacitance, rated at 6 pF typ, prevents signal distortion in high-speed applications. Meanwhile, leakage current of less than 1 nA results in minimal impact for end application. Array is specified over -40 to +125°C range and suits glucose meters, cell phones, media players, PDAs, and other portable applications.

Littelfuse, Inc.
Des Plaines, IL 60016
Oct 16, 2009 Available in 1.6 x 1.6 x 0.5 mm µDFN-6 and SOT23-6 packages, SP3002 Series provides ESD protection per IEC61000-4-2 for electronic devices with input capacitance of 0.85 pF. Four-channel units with integrated zener diode have 6 V reverse standoff voltage with low leakage of less than 1 µA and low dynamic resistance of 1.1W. Compliant with RoHS, Model SP3002-04UTG is particularly suitable for high speed port protection in mobile devices.

Littelfuse, Inc.
Des Plaines, IL 60016
Oct 15, 2009 Housed in SOT23-6 package, SP3050 Series suppresses large surge/lightning transients per IEC61000-4-5. Four-channel diode array features integrated zener diode and is suitable for secondary or tertiary protection in 10/100/1000 Ethernet applications. It is also usable in USB 2.0 applications where enhanced level of ESD protection is required. Compliant with RoHS, unit has 6 V reverse standoff voltage with low leakage of ≤1 µA and dynamic resistance under 0.7 W.

Bourns, Inc.
Riverside, CA 92507 2129
Jul 13, 2009 Available in NSOIC-8 package, Model CDNBS08-SR112 mounts directly onto FR4 printed circuit board and is designed specifically for ESD, EFT, and surge protection applications. RoHS-compliant unit provides up to 6 lines of protection using rail to rail clamping technique. Featuring low capacitance of 5 pF to minimize electrical distortion, device protects wide range of applications including Ethernet ports, portable electronics, wireless LANs, and USB interface-based systems.

ON Semiconductor, LLC
Phoenix, AZ 85008
Jul 02, 2009 Model ESD11N5.0ST5G is 0.6 pF unit that has clamping performance and minimal capacitance needed for USB 2.0 and HDMI applications. It also maintains less than 0.5 dB insertion loss up to 3 GHz. Model ESD11B5.0ST5G is 15 pF product that suits general purpose and low-speed data lines. Housed in 0.6 x 0.3 x 0.3 mm, 0201 DSN-2 package, both provide clamp input ESD waveform of 8 kV, per IEC61000-4-2 contact standard, to 10 V in nanoseconds.

Intense Ltd.
Glasgow   United Kingdom
Jun 25, 2009 Series 2400 laser diodes are 1,550 nm short pulsed single emitters and stacks designed for high power and efficiency. Single emitters are available in 75-150 µm junction lengths, with power levels of 6-12 W, and individual emitters can be stacked in mini bar configuration to provide up to 48 W of output power. Available in 5 different configurations in variety of low inductance packages, diodes can be fiber coupled in 200 or 400 µm core fibers, depending on configuration.

Applied Power Systems, Inc.
Hicksville, NY 11801
Mar 31, 2009 Incorporating isolated power supplies and protection features required for safe operation of power stages, IGBT and SCR Gate Drivers include isolated analog feedback of critical power stage parameters, DC bus voltage, output current, and device temperature. IGBT gate drivers control 2-6 IGBTs at currents in excess of 1,400 A, while SCR gate drivers control up to 12 SCRs, making them suited for ac and dc inverter, converter, and power supply applications.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Mar 03, 2009 Packaged in TO-240AA-compatible ADD-A-PAK, Gen VII Power Modules each integrate 2 active components in series and include standard diode, thyristor/diode, thyristor/thyristor, and Schottky rectifier combinations. Units feature blocking voltage up to 1,600 V, dV/dt of 1,000 V/µs, RMS voltage isolation capability of 3,500 V, and surge capability up to 3,000 A. In addition to being lead-free and RoHS-compliant, modules are constructed with exposed direct bonded copper substrate.

Dialight Corp.
Farmingdale, NJ 07727
Jan 02, 2009 Featuring red, green, yellow, and orange illumination, 591-2X04-XXXF 2 mA low-current, surface-mount LED is compatible with automatic placement equipment as well as RoHS compliant surface mount reflow soldering processes. Unit includes silicone lens that mimics typical 3 mm through-hole LED lens and utilizes prismatic light pipe in black housing. Operating from -40 to +100ºC, it is available with either square or round lens and on 7 and 13 in. reels packaged on 16 mm tape.

STMicroelectronics
GENEVA   Switzerland
Dec 22, 2008 Featuring 0.18 sq-mm footprint, ESDALCxx-1U2 Series includes 3 models with breakdown voltages of 3.9, 6.1, and 14.2 V. All can survive multiple strikes up to IEC61000-4-2 Level 4, which specifies contact-discharge pulse of 8 kV and 30 A surge current. When ESD pulse occurs, diode protects chips from pulse energy by diverting surge current to ground and clamping voltage spike to low level that IC can safely tolerate. Diodes are suited for mobile phones, GPS receivers, and MP3 players.

nLight Photonics
Vancouver, WA 98665
Dec 04, 2008 At 1.9 microns, Pearl(TM) fiber-coupled module provides up to 20 W output from one 400 micron 0.22NA fiber with greater than 10% wall-plug efficiency. Single emitter chips produce up to 1.5 W on expansion matched substrates. At 1.4 and 1.5 microns, Pearl module provides up to 40 W from one 400 micron 0.22NA fiber and greater than 30% wall-plug efficiency. Single emitter chips produce up to 3.5 W rated power on expansion matched substrates.

Opto Diode Corp.
Newbury Park, CA 91320
Nov 17, 2008 Blue/green enhanced silicon photodiode preamplifier, ODA-6WB-500M, operates between 400-1,100 nm, with peak spectral frequency at 940 nm. Sensitivity response is 140 V/µW (min 100), typ, at 450 nm. Transimpedance gain is 500 Mohm, with custom gains available upon request. Hermetically sealed in 6 mm² TO-39 housing, device operates in -25 to 100°C temperatures and is suited for fluorescence detection and low-light-level medical diagnostic applications.

PerkinElmer, Inc., Life Sciences Headquarters
Boston, MA 02118
Oct 21, 2008 Providing 21CFR Part 11 compliant environment, Series 275 HRes(TM) Photo Diode Array coupled into Series 275 HRes Liquid Chromatography System offers multi-wavelength spectral acquisition, optimizing peak identification and purity determination. System is designed to accelerate LC analysis, and with 3D photodiode array data, users gain extra dimension of spectral knowledge about sample.

Laser Components Group
Hudson, NH 03051
Sep 29, 2008 LS-Series pulsed laser diode modules are offered in 905 and 1,550 nm versions with pulse powers of 40-220 and 10-50 W and pulse lengths of 30-100 and 30-150 ns, respectively. They allow adjustment of pulse power and length via 2 control voltage inputs, and require +12 Vdc supply and TTL trigger signal in addition to the 2 control voltage inputs. Pulse length and output power may be varied while laser is operating.

OnChip Devices, Inc.
Santa Clara, CA 95054
Aug 05, 2008 Suited for space sensitive applications in portable devices such as mobile handsets, PC/notebooks, and MP3 players, ESD2200 TVS diodes dissipate ESD strikes of ±30 kV contact discharge, meeting requirements of IEC 61000-4-2 international standard. Offered in 2, 3, 4, and 5 channels, they exhibit less than 20 pF input capacitance. Packaged in miniature SOT23, SOT143, and SC70 (SMD), units offer clamp voltage as low as 10 V, which eliminates IC latch-up and soft errors.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jul 15, 2008 Housed in thermally enhanced PLCC 4 package, VLMx32 Series features power dissipation up to 200 mW, enabling drive currents up to 70 mA. LEDs provide luminous intensity of 1,400-2,850 mcd with dominant wavelengths of 610-621 nm for amber devices and 585-594 nm for yellow models. All feature 60° angle of half-intensity and luminous intensity per packing unit of less than 1.6. RoHS-compliant devices are suited for traffic signals, automotive lighting, indicators, and backlighting.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jun 23, 2008 Designed to protect dual high-speed USB ports or up to 2 other high-frequency signal lines against transient voltage signals, Model VBUS052BD-HTF offers maximum leakage current of less than 0.1 µA at working voltage of 5 V. It features breakthrough voltage of 7.9 V at 1 mA, and maximum clamping voltage of 16 V at 3 A. With 1.6 x 1.6 mm footprint and low profile of 0.6 mm, unit provides transient protection for 1 data line as per IEC 61000 4 2 (ESD) at ±15 kV (contact and air discharge).

OSRAM Opto Semiconductors GmbH
Regensburg D-93049  Germany
Jun 19, 2008 Measuring 5.8 x 4.7 x 1.5 mm, OSTAR® Projection SMT LED is suited for standard soldering processes and does not require additional connectors on board for electrical interface. For 1.5 x 3.0 cm embedded cell phone pico projector, it provides system brightness of 10 screen lumens with power consumption of 1 W, while for versions measuring 7.5 x 7.5 cm, it offers brightness values of more than 15 lumens. Single module contains four 1 mm² RGB chips, including 2 green, 1 red, and 1 blue.