Photonic Products, Ltd.
Huntington Beach, CA 92647
Sep 21, 2009 Housed in hermetically sealed TO 5.6 mm package, ONDAX 405 nm Blue-Violet Laser features wavelength stability of less than 0.015 nm/°C. Wavelength stabilization is achieved by optical feedback using ONDAX Volume Holographic Grating PowerLocker, which ensures stable single longitudinal mode operation. With wavelength locked to less than ±1 nm and coherence length of ~0.6 m, miniature laser is suited for Raman spectroscopy, flow cytometry, and metrology/interferometry.

AMS Technologies AG
Munich 82152  Germany
Aug 07, 2009 Able to communicate via SPI, RS232, or RS485 interface, ORION(TM) module provides accelerated frequency tuning functionality or direct amplitude modulation functionality in one package. End users can directly modulate frequency with bandwidth of 0-10 kHz, via unit's 9-pin D-sub connector, over specified case temperature of 0 to +70°C. Alternatively, module can be used in direct power modulation mode. GUI further facilitates integration into fiber optic sensing systems.

IPG Photonics Corp.
Oxford, MA 01540
Aug 04, 2009 Delivering up to 100 W out of 105 µm core diameter fiber with numerical aperture lower than 0.12 in., PLD-100 Series is assembled using 90 µm single-emitter chips and proprietary micro optics. Wall-plug efficiency exceeds 50% due to nonsaturated mode of operation at thermally conductive passive cooling. Offering choice of wavelength covering all 9xx nm spectral range, diode is suited for plastic and metal welding, brazing, cladding, and medical applications.

Oclaro
San Jose, CA 95134
Jun 25, 2009 Offering fill factor of 30% and emitter pitch of 500 µm, 15xx and 14xx nm laser diode bar products deliver up to 30 W continuous wave (CW) output power and are offered with micro-channel or passive Cu cooler configuration. Single emitter laser diodes emit 2 W output power at 1,470 nm from 90 µm stripe and are available on C-Mount or in 105 µm fiber coupled configuration. Products target eye-safe applications in defense, material processing, and medical markets.

Intense Ltd.
Glasgow   United Kingdom
Jun 25, 2009 Series 2400 laser diodes are 1,550 nm short pulsed single emitters and stacks designed for high power and efficiency. Single emitters are available in 75-150 µm junction lengths, with power levels of 6-12 W, and individual emitters can be stacked in mini bar configuration to provide up to 48 W of output power. Available in 5 different configurations in variety of low inductance packages, diodes can be fiber coupled in 200 or 400 µm core fibers, depending on configuration.

Photonic Products, Ltd.
Huntington Beach, CA 92647
Jun 19, 2009 Variable focus industrial laser module is available in 635-830 nm wavelengths with optical output power from 0.97-27.50 mW, with standard elliptical output beam or line generating optics that generate 45°, 60°, or 90° full fan angle line. Beam is aligned to less than 0.25° to mechanical axis of laser, providing boresight accuracy. Operating voltage is 5 Vdc regulated ±10%, they operate in -10 to +50°C, and electrical connections are made via industrial screw-on connector or 2.5 mm jack.

OSRAM Opto Semiconductors GmbH
Regensburg D-93049  Germany
Feb 06, 2009 Housed in optimized TO38 package, Blue Laser Diode offers 0.9 W/A efficiency and blue light visibility, suited for micro-projectors that can be integrated into mobile devices such as cell phones and digital cameras. Measuring 3.2 mm in height, diode has wavelength of 450 nm, output of 50 mW, and voltage of 5.5 V.

Intense Ltd.
Glasgow   United Kingdom
Feb 03, 2009 Suited for eye-safe thulium-doped fiber pumping applications, Series 8000 793-MFP delivers up to 4 W of CW output power from 100 µm core 0.22 NA fiber at wavelengths in 793 nm region. Units are integrated in standard mini fiber package, and are also available in free space configuration on C-mount with FAC-lens and on isolating sub-mounts. Diodes are used in defense and aerospace applications such as LIDAR and direct infrared countermeasures.

nLight Photonics
Vancouver, WA 98665
Dec 04, 2008 At 1.9 microns, Pearl(TM) fiber-coupled module provides up to 20 W output from one 400 micron 0.22NA fiber with greater than 10% wall-plug efficiency. Single emitter chips produce up to 1.5 W on expansion matched substrates. At 1.4 and 1.5 microns, Pearl module provides up to 40 W from one 400 micron 0.22NA fiber and greater than 30% wall-plug efficiency. Single emitter chips produce up to 3.5 W rated power on expansion matched substrates.

Photonic Products, Ltd.
Huntington Beach, CA 92647
Nov 18, 2008 Designed as single longitudinal mode semiconductor laser diode with TE mode oscillation, Opnext HL6385DG offers 150 mW optical output power at 642 nm wavelength. Aspect ratio of less than 2:1, coupled with 3 x 1 µm emitting chip size, allows efficient combination of multiple diodes in high-power RGB white light sources. Registered with FDA, this RoHS-compliant solution has output optimized for clarity and visibility.

Laser Components Group
Hudson, NH 03051
Sep 29, 2008 Available in hermetically sealed 9 mm TO housing, Models ML1468, ML1504, and ML1469 high power laser diodes are suited for photodynamic therapy, medical imaging and diagnostic systems, and DPSS laser displays. With operating temperatures of up to 50°C, Models ML1468 and ML1469 deliver optical cw power of 220 and 350 mW at 635 and 690 nm wavelengths, respectively, out of 50 x 1 µm stripe. Operated only at room temperature and with active cooling system, ML1504 reaches 500 mW.

Bookham, Inc.
San Jose, CA 95134
Sep 09, 2008 Capable of delivering 20 W of fiber coupled power into 105 µm, 0.15 NA fiber, single emitter-based pump laser module targets fiber laser and direct systems for material processing applications. Passively cooled, small form factor module has floating anode/cathode design and includes multimode pump laser chips. Module can operate at wavelengths from 795-980 nm, making it suitable for variety of pumping and direct applications.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jun 16, 2008 Including power monitoring feature to keep average optical power constant during temperature changes, model SY88212L is single-supply, 3.3 V laser driver. Device is suited for datacom and telecom applications, such as LAN and MAN, with any data rates up to 2.5 Gbps. Designed with high compliance voltage, IC can be dc-coupled to laser to reduce external component count and power consumption. Applications include FC, GbE, SONET, OC3/12/24/48, SDH, and STM 1/4/8, as well as SFF and SFP modules.

Photonic Products, Ltd.
Huntington Beach, CA 92647
May 27, 2008 Encapsulated in hard-coat anodised case with scratch-resistant sapphire window to protect lens, laser modules withstand harsh conditions, and are static, surge, and reverse polarity protected. They come in 635-830 nm wavelengths with standard elliptical output beam or line or cross generating optics. Units feature optical output powers from 0.95-30 mW, operating voltage of 5 Vdc regulated ±10%, -10 to +50°C operating temperature range, and 2.5 mm dc jack/industrial screw-on connectors.

Bookham, Inc.
San Jose, CA 95134
Mar 06, 2008 Supplied in hermetically sealed, 2-pin package with floating anode/cathode, Telcordia GR-468-CORE qualified 6 W un-cooled fiber coupled multimode laser diode lets service providers extend triple play service delivery to fiber customers located further away from central office or cable head-end. Product is designed for pumping next-generation amplifiers in cable and FTTx networks, enabling network providers to replace DSL running on coax/copper with GPON running on fiber.

Bookham, Inc.
San Jose, CA 95134
Jan 21, 2008 Suited for pumping and fiber-coupled applications, 808 nm multi-mode high power laser diode bar delivers over 60 W in continuous wave (CW) operation. These 40 W 30% Fill Factor and 60 W 50% Fill Factor 808 nm gold-tin hard-soldered laser diode bar products, available on passive cooler and micro-channel cooler, are also offered in customized configurations that can include multi-bar arrays. Products have demonstrated up to 130 W CW at 50% Fill Factor.

Ondax, Inc.
CA, CA 91016
Jan 16, 2008 Wavelength Stabilized 405 nm Laser Diodes feature coherence length of 1 m and exhibit stable interference fringes after greater than 6 m path length difference. Stabilization is achieved using PowerLocker(TM) Volume Holographic Grating, which diffracts defined efficiency at specific wavelength, increasing spectral brightness of laser diodes. Packaged in standard 5.6 mm TO cans, units are also available in wavelengths of 640, 658, 685, 780.25, and 785 nm.

Power Technology, Inc.
Little Rock, AR 72219 1117
Dec 13, 2007 Blue and violet laser diodes for use with PM laser module, 405 nm at 60 mW, can be useful in applications that use argon-ion, helium cadmium, and blue Nd:YAG lasers. Designed for use in standard or rugged OEM environments, PM industrial-grade laser module contains precision current source, offers diffraction limited optical performance, and operates on 8 Vdc.

Photonic Products, Ltd.
Huntington Beach, CA 92647
Dec 13, 2007 Supplied in 5.6 mm package, Opnext HL8337MG and HL8338MG are single longitudinal mode laser diodes featuring 1N and 3P type common cathode pin configurations, respectively. Infrared GaAlaS units provide optical output power of 50 mW CW, multi-quantum well structure, and built-in photodiode for monitoring laser output. Suited for industrial and medical sensor applications, 1.9 V diodes operate from -10 to +60°C with 75 mA current and 20 mA threshold current.

Oxford Lasers, Inc.
Shirley, MA 01464
Sep 20, 2007 Using combination of diode laser and camera techniques, VisiWeld air-cooled imaging system eliminates light from arc to let engineers see through fireball created during welding process and capture clear, close-up images. System is suited for use in field or laboratory and accommodates field of view down to 10 x 10 mm. It captures transient effects of events as little as 1 ms while allowing users to work in complete safety by watching monitor screen.