Hartmann Electronic
Springfield, OH 45505
Jul 24, 2009 CompactPCI Test Adapters feature plug-in connections on 3 sides, optimizing access, and enable measurement and testing of CompactPCI assemblies in 3U and 6U Eurocard format. Modern BRIDGE design permits up to 3 CompactPCI cards and 1 standard PCI card to be inserted into 1 CompactPCI slot via test adapter. Unit can be used with CompactPCI boards up to 220 mm depth. It also offers Windows support and detects PCI devices via standard PCI BIOS with BIOS extension.

Phihong USA
Fremont, CA 94539
Oct 24, 2008 Including PSA120U-240 and PSA120U-480, PSA120U series of adapters feature universal AC inputs, IEC320 C14 inlet receptacles, 0 A minimum load, no-load power consumption of less than 0.5 W at 115 Vac input, and Class B electromagnetic interference compliance. Suited for networking, peripheral, industrial, and test and measurement applications, units measure 6.85 x 3.03 x 1.69 in. CE, cUL, UL, and TUV approved units come with short-circuit/over-voltage, and over-power protection.

LitePoint Corporation
Sunnyvale, CA 94085
Jun 05, 2007 Multiport Test Adapter (MPTA) enables comprehensive composite EVM and fast-switching testing on multi-channel MIMO devices through one-box test instruments. Allowing OEMs and ODMs to minimize manufacturing implementation test times, this adapter offers an operating range of 2-6 GHz and addresses both 802.11n WiFi and 802.16e Wave 2 WiMAX products. Features include direct RF connections to DUT and single USB 2.0 interface.

Pomona Electronics
Pomona, CA 91766 3835
Oct 25, 2006 Supplied in pistol-grip case, N Adapters are constructed from precision machined brass with tarnish-resistant nickel plating, and can be used directly without intermediate couplers. Male center pins are gold-plated brass and female center contacts are gold-plated, heat-treated beryllium copper. All insulation material is high-density PTFE.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 08, 2006 With measurement bandwidth beyond 6 GHz and rise times below 100 ps, N1020A fixture is used in conjunction with Infiniium Oscilloscopes and HDMI Transmitter Compliance Test solution for consumer electronics. Available in K12 and K13 options, it supports test needs for HDMI as specified in HDMI Compliance Test Specification 1.2a. Product is available in Plug-End or Receptacle-End models.

Brookfield Engineering Laboratories, Inc.
Middleboro, MA 02346
Apr 04, 2006 Suited for viscometers and rheometers, UL Adapter features long spindle coupling, open-face bracket, and thumbwheel design that lets operator slide chamber down and out. Water jacket sleeve remains attached to viscometer while chamber and/or spindle are removed. With end cap removed, open tube can be used in beaker or tank. With cap in place, closed tube can be immersed in temperature bath or used with water jacket for temperature control. Working temperature range is -15 to 100°C.

Tru-Connector Corporation
Peabody, MA 01960 5099
May 30, 2003 TRU Precision Adapters feature 7 mm interface on one end and SMA, Type N, TNC, HN, and SC on other. These 50 ohm RF coaxial adapters operate from dc to 18 GHz with VSWR of 1.10 max, in -55 to +85°C temperature range. Features include 6-slot center contact on 7 mm end, gold-plated stainless steel body, passivated, stainless steel coupling nut, gold-plated brass center contact, and Noryl insulator.

WAGO Corp.
Germantown, WI 53022
Dec 11, 2001 Modular test plugs with cage clamp connection can be adapted to configuration of terminal strip, making them suitable for testing factory wired rail assemblies. Test plug contact is made in integral jumper slot of terminal blocks and connection is possible once push-in type jumper bars have been inserted. Spacers allow terminal blocks to be skipped so that test plugs can be adapted to design of terminal strip.