AVX Corp.
Myrtle Beach, SC 29578
Nov 18, 2009 With working voltage range of 100-250 Vdc, SQCA Series exhibits stability under stresses of changing voltage, frequency, and temperature. Porcelain and ceramic dielectric material promotes reliability while minimizing ESR and resistance values. Featuring 100% tin terminations, RoHS-compliant product has 0605 case size and capacitance range of 0.1-100 pF. Uses include microwave RF/IF amp, low noise amp, mixer, oscillator, filter network, and MRI system applications.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Oct 28, 2009 Designed for mobile UHF TV receivers and portable consumer electronics, Vitramon Chip Antennas cover 470-860 MHz band and comply with MBRAI standard while maintaining small outlines of 35 x 5 x 1.2 mm for VJ 3505 and 10.5 x 15.5 x 1.2 mm for VJ 6040. Units feature 50-O unbalanced interface and operating temperature range of -40 to +85°C. Omni-directional with linear polarization, RoHS-compliant antennas are assembled onto PC board in standard reflow process.

HolyStone International
Murrieta, CA 92563
May 15, 2009 Available in EIA size codes 1812, 2220, 1825, and 2225, SMC and HSC series are available in J, L, and N leaded configurations for through hole or surface mount use. Capacitance ranges are from 470 nf to 35 µf in 125°C rating, while lead frame design protects against mechanical and thermal stresses. RoHS compliant units are suited for switch-mode power supply filters. Rated for 150, 200, and 250°C, HSC series also suits oil logging, engine controls, and jet engine applications.

AVX Corp.
Myrtle Beach, SC 29578
Apr 06, 2009 With insulation resistance at 100,000 MW minimum, ESL of 164 pH, and ESR of 75.6 mW, UT Series ultra thin ceramic capacitors are designed for use in smart cards, high-density SIM cards, and memory modules. Incorporating chemical termination system for repeatable termination thickness and dimensions, parts can be produced that measure just 0.3 mm high with capacitance value of 10 nF and voltage rating of up to 25 V.

Tecate Industries
Poway, CA 92064
Feb 24, 2009 Offered in EIA 1825 and 2225 size codes as well as NPO and X7R dielectrics, CSM Series has operating voltage range of 25-500 Vdc and delivers capacitance values from 0.047-33 µF. These stacked Switch Mode Power Supply (SMPS) capacitors feature Equivalent Series Resistance/Inductance values suited for high-CV consumer and industrial applications. Vertical stacking of ceramic components minimizes footprint required for mounting, while strain relief is provided by lead frame design.

AVX Corp.
Myrtle Beach, SC 29578
Dec 31, 2008 Developed by mounting MLCC in molded surface mount leadframe, MH Series of high CV ceramic capacitors are rated at up to 100 V with maximum capacitance of 22µF. Lead free units operate in temperature range of -55°C to +125°C. Applications include, input/output capacitors for industrial and telecoms applications, smoothing circuits, HID, and automotive high CV applications.

Kemet Electronics Corp.
Greenville, SC 29606
Dec 10, 2008 Offered in case sizes from 1808-2225 in X7R dielectric, SMT Flexible Termination (FT-CAP) incorporates flexible termination system that minimizes cracking during assembly. Integrated with standard termination materials, conductive epoxy placed between conductive metallization and nickel barrier finish establishes pliability while maintaining terminal strength, solderability, and electrical performance. This directs board flex stress away from ceramic body and into termination area.

AVX Corp.
Myrtle Beach, SC 29578
Dec 01, 2008 Encompassing NP0, X7R, and X8R dielectrics for harsh environment applications, SkyCap® AR Series meets CECC and ceramic AEC-Q200 qualifications. AR Series X8R dielectric allows for extended temperature range up to 150°C. Also available, SL Series with Sn/Pb lead configurations suit military/space designs, while RoHS-compliant SR Series suit general commercial applications. All operate in standard temperatures to 125°C and are available up to 200 Vdc with 1 pF to 4.7 µF capacitance.

Novacap Inc.
Valencia, CA 91355
Nov 24, 2008 Offering alternative to polarized tantalum and electrolytic capacitors in filter applications, X7R and X5R series multilayer ceramic capacitors (MLCCs) are packaged in 0402 to 1812 case sizes and offer capacitance values from 100 pF to 100 µF. Available value-added capabilities for these products include non-standard plating finishes, such as gold; affixing of various standard and custom lead frames; as well as screening to various reliability MIL PRF levels.

AVX Corp.
Myrtle Beach, SC 29578
Nov 11, 2008 Offering capacitance values up to 100 µF with ESR down to 0.001 ohms, TurboCap(TM) multilayer capacitor series handles high ripple current at frequencies up to 100 kHz and power levels up to 100 V. Stackable solutions, suited for filters in input and output stages of dc/dc converters and switch mode power supplies (SMPS), are available in ST12 and ST20 styles as well as standard or Hi-Rel version. Each features X7R dielectric formulation and temperature coefficient of -55 to +125°C.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Nov 04, 2008 Models VJ0805/VJ1206/VJ1210/VJ1808/VJ1812 HVArc Guard® multilayer ceramic chip capacitors are available with optional polymer terminations constructed to withstand high levels of mechanical stress. Devices prevent surface arc-over at voltages from 250-1,000 Vdc and capacitance range of 100 pF to 0.27 µF. Devices eliminate need for conformal coating, and are optimized for buck and boost dc-to-dc converters, voltage multipliers for flyback converters, and lighting ballast circuits.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Oct 30, 2008 Measuring 32 x 40 x 3.7 mm, EVC Series provides max rated capacitance of 630 Vdc and effective capacitance of 12 µF at 400 Vdc. Allowable ripple current is 20 A at 20 kHz, with dielectric withstanding voltage of 750 V and max operating temperature of 125°C. Featuring surface mount design, multilayer monolithic ceramic capacitors are compatible with re-flow soldering, offer resistance to thermal cycling, and are suited for hybrid and electric automotive engineering.

Novacap Inc.
Valencia, CA 91355
Jul 23, 2008 Cap-Rack(TM) (CR) series combines custom selection of individual ceramic components, separated by high-temperature epoxy, into one surface-mount package. Components in each CR array can consist of highly matched MLCCs and/or combination of MLCCs with dissimilar capacitance values and dielectrics. Arrays can also be configured to include passive devices such as ceramic resistors and inductors. Offered in groupings up to 8 chips, arrays reduce PCB area requirements through chip orientation.

Sprague-Goodman Electronics, Inc.
Westbury, NY 11590
Apr 10, 2008 Measuring 0.177 x 0.126 x 0.059 in., SGC3S Series surface-mounted devices are constructed with high-temperature liquid-crystal polymer housings that resist penetration by dust and flux. Housings are also colored to identify 5 available capacitance ranges from 1.2-3.0 pF to 8.0-30.0 pF. Designed for reflow soldering, RoHS-compliant units are suited for designs requiring minimal capacitance drift over operating temperature range of -25 to +85°C.

TDK Corporation of America
Mount Prospect, IL 60056
Feb 25, 2008 Offered in 1608 and 2012 configurations, Multilayer Ceramic Chip Capacitors offer resistance ranges of 10-1,200 mW and 10-500 mW, respectively. Internal structure allows ESR values to be set within specified range, so there are smaller changes in impedance between power supply and CPU over range of frequencies as well as voltage variation limiting effects. Units are suitable for communications base stations and high-end PCs.

Kemet Electronics Corp.
Greenville, SC 29606
Feb 15, 2008 Intended for Switch Mode Power Supply (SMPS) and pulse energy applications, military-grade ceramic stacked capacitors are qualified to MIL-PRF-49470 and DSCC Drawing 87106. ESR and ESL values make them suited for power supply I/O filtering as well as snubber applications. Available in case codes 3, 4, and 5, solutions offer X7R dielectric, voltage ratings from 50-500 Vdc, and capacitance values to 47 µF. Chip stack is horizontal, and leadframe attachment is high-temperature solder.

Kemet Electronics Corp.
Greenville, SC 29606
Sep 11, 2007 Combining Floating Electrode and Flexible Termination technologies, Model FF-CAP multilayer ceramic capacitor ensures protection from board flex by offering up to 5 mm of flex-bend capability. With 6.3-250 Vdc voltage range and stable X7R dielectric, it provides flex robust solution in low- to mid-capacitance values of J (±5%), K (±10%), and M (±20%). Operating temperature range is -55 to +125°C with zero bias capacitance shift limited to ±15%.

Taiyo Yuden (USA), Inc.
Schaumburg, IL 60173
Aug 09, 2007 Providing capacitance of two typical 0402 components, Model AMK105BJ475MV is designed for decoupling power-line circuits in integrated circuits used in cell phones, digital still cameras, and other battery-powered, portable electronics. Rated at 4 Vdc, RoHS compliant multilayer ceramic capacitor features capacitance change of ±15%, temperature range of -55 to +85°C, and 10% tangent of loss angle.

Kemet Electronics Corp.
Greenville, SC 29606
Jun 22, 2007 Featuring operating temperature range of -55 to +125°C with 0 bias capacitance shift limited to ±30 ppm/°C, HiCV capacitors in C0G dielectric are offered in versions with capacitance values of 0.22, 0.1, 0.033, 0.01, and 0.001 µF. Available in commercial and automotive grades, RoHS complaint products come with 100% pure matte tin-plated terminations, and meet requirements of AEC Q200 Rev. C. Tolerance range from ±1% to ±20%.

Kemet Electronics Corp.
Greenville, SC 29606
Jun 20, 2007 Offered in case sizes from EIA 0603 to 1210, FT-CAP Capacitors feature pliable end terminations with 5 mm of flex-bend capability, shifting flex stress into termination area and away from ceramic body and component's active layers. This minimizes risk of capacitor failure due to electrical short. Terminations are 100% pure matte tin-plated for solderability. Compliant with RoHS, devices operate from -55 to +125°C, with zero bias capacitance shift limited to ±15% over that range.