Safety Technology International
Waterford, MI 48327
Mar 26, 2009 Designed for use with STI-7500 series A, C, or F backbox and STI Stopper® II with 4 in. deep enclosed backbox, Model SUB-315 allows installer to place device onto plate and then mount plate and appliance into cover. Plate can be drilled to accommodate any type of device, such as keypad or control panel. Using plate, appliance can be assembled with any side or bottom tamper screws and then mounted into cover.

PC Enclosures
Wentzville, MO 63385
Mar 23, 2009 ICON, INFINITY, and ELITE digital signage enclosures are designed to protect plasma and LCD systems against theft, vandalism, water, dust, and heat. Used indoors or outdoors, they are sealed, lockable, and secure. Units are suited for use in public settings such as retail centers, industrial facilities, arenas, expo centers, airports, and subway/train stations.

OKW Enclosures, Inc
Bridgeville, PA 15017
Mar 09, 2009 UNITEC enclosures feature 2 inclined operating panels, at right angles to each other, which enable simultaneous input of data on one side and readout on other. Measuring 5.826 x 8.267 x 3.149/0.984 in., ergonomic enclosures feature 3-part design and are molded in ABS in off-white. Case parts interlock and are secured by 2 self-tapping screws. Utilized for desktop or wall mounted applications, units can be specified with or without battery compartment for 3 or 5 x 1.5 V AA cells.

Bulgin Components PLc
Barking Essex IG11 0AZ  United Kingdom
Feb 12, 2009 At 80 mm long and 53 mm deep, BE plastic enclosures are offered in 72, 106, and 139 mm widths for applications such as control stations and electrical/electronic control equipment. Corrosion- and impact-resistant products are available in choice of ABS (UL94-HB rated) or Polycarbonate (UL94-V0 rated), with respective temperature ratings of -20 to +85°C or +100°C. Along with 2 molded knock-outs with M20 thread, enclosures feature internal pre-molded PCB fixings and slots.

FSR Metal Products
West Paterson, NJ 07424
Feb 04, 2009 Designed to house hard switches, elastomeric pads, touch screens, and infrared pickups, OWB-CP1 Outdoor Wall Box allows for either surface, flush, or pole/pipe mounting using optional brackets. Unit comes with lockable doors and meets NEMA 4 ratings, so control panels are secure and protected from dirt, dust, rain, sleet, or snow. Doors are available with or without windows, and plates are included that accommodate 2- or 3-gang electrical plate mounting.

EIC Solutions, Inc.
Warminster, PA 18974-1157
Jan 08, 2009 Built to NEMA 4/4X construction standards in steel and stainless steel, DVR Cooler suits indoor/outdoor applications. It can house and protect DVR, as well as other 19 in. rack-mount electronics such as servers, routers, modems, switches, amplifiers, network gear, and communication equipment. Equipped with companion cooling system to provide protection for electronics, enclosure is customizable to accommodate different mounting requirements.

Hoffman
Anoka, MN 55303 1778
Jan 05, 2009 Desined to meet UL, NEMA/EEMAC, and CSA Type 1 standards, T1FLO(TM) uses active cooling ventilation system with 115 Vac fan, vent, filter, and thermostat to keep heat-sensitive drives and controls cool and protected. Off-the-shelf product is constructed with 14 gauge steel and offered with various airflow and enclosure size options. Other elements of construction include lift-off hinge door and solid or perforated accessory panels.

National Instruments Corp.
Austin, TX 78759-3504
Dec 12, 2008 Providing jitter-free communications, 8-slot Model NI 9144 is compatible with more than 30 analog and digital NI C Series modules as well as NI real-time controllers that have 2 Ethernet ports. Chassis also features 2 Ethernet ports, making it possible to daisy-chain multiple chassis from single controller. Using system of synchronized clocks, NI 9144 communicates deterministically across standard CAT5 Ethernet cable and can be distributed up to 100 m between chassis.

EIC Solutions, Inc.
Warminster, PA 18974-1157
Dec 10, 2008 DVR enclosure holds standard 19 in. rack-mountable DVR and protects it from harsh environmental factors such as dust, temperature, moisture, corrosion, and vibration. Equipped with companion cooling system, it is available in full-size, half-size, rack-mount, wall-mount, and custom configurations. NEMA 4 white-powder-coated steel and NEMA 4X SS configurations are also available.

FSR Metal Products
West Paterson, NJ 07424
Dec 09, 2008 Designed for AV, IT, and control applications, OWB-X Outdoor Wall Boxes are available in two box styles that allow for either flush or surface mounting. They feature flip up cable entry doors so that main cover door can be locked once cables are connected. Constructed in NEMA-4 style, boxes have integral locking doors in brushed aluminum. Internal connector mounting styles handle standard gang plates, IPS inserts, or XLR type connectors.

Elma Electronic Inc.
Fremont, CA 94538
Nov 21, 2008 MicroTCA solution in 19 in. rackmount 3U MicroSlim(TM) design offers 12 AMC, 2 MicroTCA carrier hub, 1 J-TAG switch module, 2 power modules, and 3 spare slots. There are also 4 HDD slots with SATA connectivity. Chassis accepts cards in single module/mid size (75 mm high x 4 HP wide), and chassis configuration can be customized to allow double modules (150 mm) and compact (3 HP) or full size (6 HP) modules. Internal cooling units produce 42 cfm each.

Bud Industries, Inc.
Willoughby, OH 44094
Oct 31, 2008 Available with or without integral battery compartment, Grabber Style K features soft ribbed-rounded sides that ensure secure, comfortable grip. Unit blends T- and rectangular-shaped enclosures, optimizing room for internal components. Made from high-impact-resistant black ABS plastic with UL94V-0 flammability rating, enclosure comes complete with top cover, bottom cover, battery door, and assembly hardware. Recessed top is suitable for label or keypad.

AD Products Co.
Cleveland, OH 44135
Oct 27, 2008 Available in 10 sizes ranging from 6 x 6 x 4 to 20 x 16 x 10 in., Premier Series is both NEMA 4X and IP66 rated with temperature range of -40 to 250°F. Hinges and latching are located on outside of sidewalls with no penetration into enclosure, eliminating risk of compromised protection. Gap areas are minimized to inhibit accumulation of dust, dirt, and other debris, which is critical for environments such as food processing and chemical processing.

Fibox Enclosures
Glen Burnie, MD 21061
Oct 08, 2008 Manufactured from injection-molded polycarbonate, ARCA(TM) Enclosures come in 10 standard interior sizes ranging from 6 x 6 x 4 in. to 18 x 16 x 10 in. All units offer opaque or transparent covers and feature overlapping cover design, providing protection of formed-in-place polyurethane gasket. Suited for electronics, instrumentation, controls, and automation applications in both indoor and outdoor environments, enclosures are UL Listed and NEMA rated Type 4, 4X, 12, and 13.

Fibox Enclosures
Glen Burnie, MD 21061
Sep 11, 2008 Offered in 7 sizes from 6 x 6 x 4 in. to 18 x 16 x 10 in., ARCA(TM) enclosures are available with optional mounting flanges that allow wall mounting in portrait orientation or landscape orientation. Enclosures come standard with wall mounting feet and are manufactured using injection molded polycarbonate to protect electrical and electronic equipment in industrial applications. Available with opaque or transparent covers, products are UL-Listed and NEMA rated Type 4/4X/12/13.

Pulse Engineering, Inc.
San Diego, CA 92128
Sep 09, 2008 Used for connecting transceivers and shielding them from EMI in Ethernet equipment, SFPCAGE006-L can handle optical transceiver links as well as transceivers configured as copper RJ45 connectors. Insulation resistance is 100 V, and mylar paper pasted on bottom isolates cage and allows use of PCB under cage for circuit trace design. Able to handle speeds to 5 Gb, 142.85 x 48.70 x 9.55 mm cage reduces operating temperature of transceiver and provides mechanical stability.

PCI Automation Inc
Antioch, CA 94509
Sep 03, 2008 Offering COTS modular chassis for VPX/VME/CPCI/CPCIe, ARINC600-ATR enclosures enable accelerated development of rugged conduction-cooled, embedded systems for airborne applications. Products are offered with interchangeable backplane-bus versions, and each slot has its own rear I/O PCB to facilitate definition and testing of custom wiring. This setup can be exchanged with custom rear I/O PCB set. Loaded via front, boards are fixed in place with self-clamping wedge locks.

Fibox Enclosures
Glen Burnie, MD 21061
Aug 28, 2008 Offered in 18 x 16 x 10 and 16 x 14 x 8 in. sizes, chemical resistant ARCA(TM) Series Enclosures come with opaque/transparent covers. Featuring overlapping design and rugged construction, they are UL listed and NEMA rated Type 4, 4X, 12, and 13. Mounting plates as well as fixed and hinged inner panels are available in either metal or non-metallic versions, while enclosure latches can be metal or non-metallic and are available with or without padlock option.

Optima Electronic Packaging Systems
Tucker, GA 30084 5088
Aug 27, 2008 Outdoor enclosure line is offered in 19, 23, and 24 in. widths, 24, 30, 36, and 42 in. depths, and 12U-44 U heights. For NEMA 4 designs, EDMP gasketing for waterproofing and dust/particle protection is employed, which is resistant to UV, ozone, weathering, seawater, compression set and abrasion and has temperature range of -40 to 120°C and is tested to UL 508. Heavy-duty aluminum frame can be incorporated with integrated gasketing, corner castings, multi-point locking system, and windstops.

Elma Electronic Inc.
Fremont, CA 94538
Aug 25, 2008 Supplied in 1U height and 240 mm or 360 mm depth, SlimKit 19 in. EMC Enclosure provides EMC performance without separate gaskets. Covers of chassis have EMC tabs that provide protection, while sidewalls have punched and formed EMC spoons that provide extra EMI/RFI suppression. As enclosure has EMC built into sheet metal, fewer screws are required.