Others

Electrical Equipment & Systems, Electronic Components & Devices, Material Handling & Storage

BIG Series Modular Hoods offer size 44.27.

November 21, 2016

Compatible with existing rectangular connectors, BIG Series Modular Hoods come in size 44.27. Enabling connection of push button selectors, switches and signaling lamps after necessary holes are drilled, unit’s upper and lower half compartments are connected by 4 screws with o-rings. Enabling power supplies or signaling circuits even after connectors are coupled, unit offers one or more top... Read More

Electronic Components & Devices

Atrenne Extends SFF Design to Enable Deployment of Commercial Electronics in Extreme Conditions Above 50,000 Feet

October 27, 2016

Addition to SFF 760 Series Enables Use of Mini-ITX in Airborne Applications BROCKTON, Mass. - Atrenne Integrated Solutions, Inc. announced an extension to the Small Form Factor (SFF) 760 Series electronic packaging design which enables off-the-shelf Mini-ITX and PCIe commercial electronics CCA's to be deployed in airborne applications that reach stratospheric altitudes, well above 50,000... Read More

Electronic Components & Devices, Plant Furnishings & Accessories

IP66 Swivel Mount Enclosures are provided with weight processors.

September 13, 2016

Delivered with either Hardy HI 6500-XP, HI 6500, or HI 6300 series weight processor, IP66/NEMA 4X Swivel Mount Enclosures are made using 16 gauge 304 Stainless Steel and designed for harsh and heavy wash down environments. LCD is sized to facilitate viewing and use ad is protected from impact by polycarbonate window behind watertight membrane. Also included, sealed tactile button cluster in... Read More

Electronic Components & Devices, Plant Furnishings & Accessories

ABS Enclosures support variety of electronics applications.

September 13, 2016

Available in 5.75 x 3.75 x 1.97 in. size, XR-35 Enclosures are molded from black, flame-retardant ABS plastic rated to UL94-5VA. Units are available with or without surface-mounting flanges which feature round holes for permanent mounting and keyholes for temporary mounting. Additional features include PC board mounting bosses in base and screw-on cover with recessed center, suitable for membrane... Read More

Electronic Components & Devices, Material Handling & Storage

Modular Subracks mount 3U, 6U, and custom-sized boards.

September 9, 2016

Modular subracks and components are available for plugging various board sizes. Commonly 3U and 6U high (or 4U and 7U to allow spacing for fans), subracks come in 84HP (for 19 in. rackmount size), 42HP,  and 21HP widths. Extruded rails feature tapped holes and optional extensions for IEEE injector/ejector latches. Lightweight aluminum components have clear chromate finish. Additional... Read More

Electronic Components & Devices, Material Handling & Storage

Modular Subracks mount 3U, 6U, and custom-sized boards.

September 7, 2016

Available in typical heights of 3U and 6U or 4U and 7U to allow for spacing for fans, modular subracks come in 84HP (19 in. rackmount), 42HP,  and 21HP widths. Extruded rails have tapped holes and offer optional extensions for IEEE injector/ejector latches. Multiple depth options are available, and EMC versions are standard. Made of aluminum, components in subracks have clear chromate... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Polycarbonate Enclosures offer up to 900 in-lb impact resistance.

August 22, 2016

While all polycarbonate enclosures within Integra Impact series are NEMA 4X-rated, marine-duty models are watertight and saltwater resistant with NEMA 6P rating. All of these wall-mount, single-door enclosures feature UV light resistance and operate from -40 to +265°F. Hinges facilitate door removal and permit 225° door swing; clear or opaque lids are available. Along with integrated... Read More

Electronic Components & Devices

OKW MINITEC EM Enclosures offer eight higher intermediate rings with USB slot option. .

August 15, 2016

Available in two shapes, MINITEC EM (IP 41) enclosures feature rings with loops that enable unit to be suspended from a lanyard or key ring. Designed to fit cases measuring 2.68” x 1.65” x 0.71”/0.95”, enclosures are offered in sizes: S (2.05” x 1.26” x 0.59”), M (2.68” x 1.65” x 0.71”/0.95”), and L (3.07” x 1.89” x 0.79”/0.95”/1.02”). Suitable for remote control... Read More

Electronic Components & Devices, Mounting & Attaching Products

Pole Mounting Kits support NEMA enclosures.

August 8, 2016

Available for YH Series and YQ Series NEMA-rated junction enclosures, PK Series Pole Mounting Kits feature adjustable stainless steel bands that allow for mounting on poles with diameter of 2–12 in. Enclosures can be oriented horizontally or vertically. Designed for outdoor use, corrosion-resistant mounting kits utilize Unitstrut® brand strut channel. All hardware is included. Read More

Electronic Components & Devices

DIN Rail Enclosures feature 4 integrated terminal blocks.

July 12, 2016

Measuring 0.89 x 4.41 x 3.90 in., RAILTEC C Enclosures are molded from green PA6 and are available with or without ventilation slots. Each case is supplied with four 4-pole, 5 mm pitch pluggable terminal blocks, yielding 16 poles within width of enclosure. PCBs slide in on integrated vertical guide rails. Snapped onto TH35 DIN rails or mounted directly to wall, enclosures are suited for time... Read More

Electronic Components & Devices

NEMA-Rated Enclosures afford indoor/outdoor protection.

July 11, 2016

Hubbell Wiegmann NEMA 3R enclosures protect wiring and junction boxes against dripping water, falling rain, sleet, snow, and external ice formation in outdoor and indoor applications. Models, some with hasps for padlocking, include galvanized steel units and larger sizes with hinge covers. Also available, Hubbell Wiegmann NEMA 12 enclosures feature gasketed doors and prevent ingress of... Read More

Electronic Components & Devices

High Top DIN Rail Enclosure comes with open or closed front.

June 17, 2016

At 6 modules wide (4.21 x 3.54 x 4.49 in.), high top RAILTEC C locks onto TH35 rails and is available with closed or open front. Both versions feature 2 sides open for connections, and removable ridges provide stability during transport. Accommodating up to 4 terminal guards, enclosures feature fastening pillars in bottom section as well as guides for installing PCBs. Product is molded... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Plant Furnishings & Accessories

Hinged Enclosures meet NEMA 4X and IP67 requirements.

June 16, 2016

Available in 5 sizes up to 24 x 20 in., WQ Series is molded from impact-resistant polycarbonate reinforced with fiberglass, which offers durable alternative to metal enclosures. Hinged cover, which is available in clear or opaque, allows access to internal components. WQ Series is suitable for applications in network communications, alternative energy, industrial automation, or anywhere... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Altronix Highlights Innovative Power and Transmission Solutions at ESX 2016

June 14, 2016

LINQ™ Network Communication and Control Solution Among Many Featured Products Fort Worth, TX – Altronix Corporation, a leader in power and transmission solutions for the professional security industry, is showcasing a number of new and innovative products and solutions at ESX 2016, including the company’s new LINQ™ Technology Platform. Designed to fill the void in network communications... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

MicroTCA Chassis (1U) supports PCIe Gen 3 speeds.

May 26, 2016

Available with multiple power options, including dual redundant configuration, Pixus PXS0108 features 6 Advanced Mezzanine Card (AMC) slots and 1 MicroTCA Carrier Hub (MCH) slot. Active backplane, alleviating need for power modules, provides power manager controls and limits management and payload power to max allowed limit for each slot. PCIe Gen 3 brings backplane speed to 8 GBps in... Read More

Electronic Components & Devices, Plant Furnishings & Accessories

Plastic Enclosures provide impact resistance.

May 20, 2016

Offered in 15 sizes from 2.56 x 1.97 x 2.17 in. to 22.05 x 11.02 x 5.12 in., PTS Series is made of impact-resistant gray polycarbonate reinforced with 10% fiberglass. IP67 rating combined with continuous foam gasket provides solution for housing sensitive equipment in hazardous, dusty, and washdown environments, as well as wet outdoor locations. Available with optional clear plastic cover,... Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Material Handling & Storage, Mechanical Components and Assemblies

Conduction-Cooled ATR Chassis meet military standards.

May 10, 2016

Available in ATR format or in specialty Small Form Factor designs, Conduction-Cooled Chassis support both OpenVPX and MicroTCA architectures. Units come in standard ½ and ¾ sizes for 3U or 6U boards. There are also options for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Enclosures are designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461. For specialty... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Electronics Enclosures are designed for indoor applications.

May 10, 2016

Unsealed (IP41) DATEC-COMPACT handheld enclosures enable effecting housing of electronics for OEM designers. Ergonomic units – enclosures, desk stations, and wall holders – can be specified with built-in contacts for charging three 1.5 V AAA or AA cells, and IP65 version with battery compartment enables SD cards and USB connectors to be housed within sealed area. Construction is... Read More

Electronic Components & Devices, Plant Furnishings & Accessories

Enclosure Kits allow flexible transmitter mounting.

May 9, 2016

Offered in kits with hinged or flat cover, Signet 9900 Transmitter Rear Enclosures enable flexible mounting of Signet 9900-1P Transmitter onto pipes, walls, tanks, struts, at angles, or inside panels. Holes for wiring in any orientation can be drilled on any enclosure side for further flexibility, and room is provided to accommodate all accessory modules: 4–20 mA output, batch, relay,... Read More

Electronic Components & Devices, Mechanical Components and Assemblies, Plant Furnishings & Accessories

ATR Format Enclosures have conduction-cooled design.

May 9, 2016

Available for both OpenVPX and MicroTCA architectures, conduction-cooled ATR format chassis comes in ½ and ¾ sizes for 3U or 6U boards. Options are also available for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461, products are also available with power interface boards for incorporating VITA 62 or... Read More