Linear Technology Corp.    Milpitas, CA 95035
Dec 19, 2005 Featuring complete photoflash capacitor charger and IGBT driver, LT3485-3, -0, -2, and -1 photoflash capacitor charger ICs operate from 1.8-10 V range and have primary current limits of 2, 1.4, 1, and 0.7 A respectively. Control technique allows series to use 5.8 x 5.8 x 3 mm transformers, and no external components are required to set output voltage. While charging, output proportional to capacitor voltage is available for monitoring. Average input current ranges from 225-700 mA.

Linear Technology Corp.    Milpitas, CA 95035
Dec 19, 2005 Using constant frequency, current mode architecture, Model LTC3412A can deliver up to 3 A of continuous output current at voltages as low as 0.8 V from 4 x 4 mm QFN package. It operates from input voltage of 2.25-5.5 V, making it suited for single cell Li-Ion or NiMH applications. Synchronous buck regulator uses internal switches with RDS(ON) of 0.065 and 0.077 ohms to deliver efficiencies up to 95%. No load quiescent current is 64 µA, and less than 1µA in shutdown.

SiRF Technology, Inc.    San Jose, CA 95112
Dec 19, 2005 SiRFstarIIx chipsets are available in GSC2x, GSC2xr, and GSC2xrx versions that integrate RF and baseband into one package; models GSC2xr and GSC2xrx also eliminate need for external flash memory. Measuring 10 x 7 mm, single-chip solutions require 60 mW power for nominal operation and 25 mW for TricklePower operation. Internal software allows use of various configurations from blinking LEDs and varying baud rates and protocols.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Dec 19, 2005 Optimized for lead-free manufacturing, package integrates Hysol® GR828H mold compound with Hysol QM1519 die attach adhesive for wire sweep properties and adhesive strength, respectively. Green solution, designed for 16- and 14-lead, Pb-free SOIC packages, uses Cu/Ni/Au leadframe. It achieves MRT reliability for MSL L1 up to 260°C, with no delamination at die top or at pad. High temperature storage is tolerated for up to 3,000 hr @ 210°C.

Advanced Power Technology    Bend, OR 97702
Dec 16, 2005 Designed to handle medium pulse widths up to 150 µs with 5% min duty cycle, Models 0910-60M, 0910-150M, and 0910-300M cover frequency for P-Band radar applications from 890 to 1,000 MHz with output power of 60, 150, and 300 W, respectively. Class C 300 W device offers 0.5 dB droop at 150 ns rise time with load mismatch VSWR of 3:1. By integrating 4, 6, or 8 of 0910-300M transistors with 0910-150M and 0910-60M as driver and pre-driver stage, kW output power can be achieved.

Fujitsu Microelectronics Inc.    San Jose, CA 95134 1804
Dec 16, 2005 Delivering 10 Mbps over 2 channels, application-specific FlexRay(TM) MB88121 provides fault-tolerant, deterministic data transmission, suitable for engine control, braking, and steering subsystems. It can be connected directly to existing CPUs and complements standard automotive buses, including CAN and LIN. Internal speeds reach 80 MHz with 4, 5, 8, or 10 MHz external oscillator, or by external clock. Parallel interface affords max frequency of 33 MHz.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 16, 2005 Housed in 1.6 x 3.2 mm package, ACAS 0612 Series has absolute TCR down to 25 ppm/K and tracking TCR as low as 10 ppm/K. Available in precision and professional versions, devices offer resistance values from 100 ohm to 221 kohm in numerous configurations including 4 equal, 4 different, or 2 equal value pairs. Each resistance element is rated to 0.1 W dissipation, up to max of 0.3 W per package. Operating voltage is 75 V and max film temperature is 125°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 16, 2005 Offered in 0402, 0603, 0805, and 1206 packages, Models MCS 0402, MCT 0603, MCU 0805, and MCA 1206 provide resistance values up to 221 kohm, 511 kohm;, 1.5 Mohm, and 2.0 Mohm, respectively. All devices meet requirements of EN 140401-801 and include tolerances of 0.1 or 0.25% and TCR ratings from 25-10 ppm/K. Compatible with tin/lead and lead-free soldering processes, resistors are available in voltage ratings from 12.5-200 V with max film temperature of 125°C.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Dec 16, 2005 Integrating 75 V N-channel MOSFET and emulated, current-mode PWM, Model LM5005 steps down input voltage from 7-75 V to produce regulated 2.5 A power supply, adjustable from 1.225-65 V. Current-mode control provides inherent line voltage feed-forward and loop compensation. Bi-directional oscillator synchronization pin allows multiple LM5005 regulators to self-synchronize or switch synchronously with external clock. Device is available in TSSOP-20 package.

M/A-COM, Inc.    Lowell, MA 01853
Dec 15, 2005 Offered in RoHS-compliant and non-RoHS-compliant versions, PIN, Schottky, and varactor diodes are available in miniature, 2-leaded SC-79 package that features 0.6 nH inductance and meets 260°C max rating required for Pb-free processing. Varactor diodes are designed for VCO applications, phase shifters, and tunable filters, while Schottky diodes are suited for RF power detector circuits requiring high sensitivity. PIN diodes suit base station and switching applications.

Vynckier Enclosure Systems, Inc.    Houston, TX 77029
Dec 15, 2005 Series VJ (flat cover) and RVJ (raised cover) Platinum Plus enclosures are made of halogen free, hot molded, glass fiber reinforced polyester and can withstand continuous temperatures from -58 to 302°F. Available in 7 sizes with inner dimensions from 6 x 6 in. to 18 x 16 in., enclosures are offered in platinum color for UV resistance. Gaskets are seamless polyurethane foam, and various window, hinge, vent, and latching options are available.

Stackpole Electronics Inc.    Raleigh, NC 27604
Dec 15, 2005 Capable of handling energy pulses up to 30 J, RC Series features resistance values from 1 Ω to 20 MΩ with tolerances down to ±5%. Units operate from -55 to +105°C, and are available in power ratings of ¼, ½, and 1 W at 70°C. Resistors are inherently non-inductive, yet do not exhibit catastrophic failures, making them suited for surge protection and high peak voltage uses such as defibrillators, electronics, automotive ignition systems, and industrial power supplies.

Airgo Networks, Inc.    Palo Alto, CA 94304
Dec 15, 2005 Based on single chip with 2 complete, fully integrated radios, True MIMO Gen3 Chipset enables content such as media-rich Internet, large files, video, IPTV, music, photos, and games to be distributed across wireless network without compromise in performance, while remaining 100% compatible with 802.11b, g, and Wi-Fi. Product provides actual TCP/IP throughput over 120 Mbps with compressed traffic, surpassing performance of wired 100BaseT Ethernet.

Atmel Corp.    San Jose, CA 95131
Dec 15, 2005 Suited for PDAs, mobile phones, and GPS applications, ANTARIS(TM) 4 offers tracking sensitivity of -158 dBm. With power consumption of 62 mW during 1 Hz update rate in Continuous Tracking Mode, baseband Model ATR0621 is enabled by 0.18 um CMOS technology, while RF-front end IC Model ATR0601 is enabled by BiCMOS technology. Chipset's 16-channel engine features u-blox SuperSense(TM)-enabled indoor GPS, A-GPS, and full support of WAAS and EGNOS satellites.

AudioCodes Ltd.    San Jose, CA 95110
Dec 15, 2005 VoIP chip with integrated software and hardware reference design, Tulip AC494 ATA, is targeted for OEMs seeking to add VoIP capabilities to products. Basic configuration integrates two 10/100 baseT Ethernet ports, 1-4 VoIP ports, and 2 two FXS analog interfaces. It supports various configurations of FXS and FXO ports using pin and software compatible devices from Legerity's VE880 VoicePort(TM) Series. Functions such as call waiting, hold, and 3-way conferencing are supported.

Stackpole Electronics Inc.    Raleigh, NC 27604
Dec 13, 2005 Shielded, wirewound PS Series is rated from 1.0-10,000 µH with standard tolerance of ±20% and current ranges from 1,000-20 mA. Featuring ferrite construction with magnetic shield, RoHS-compliant inductors come in 3 sizes and enable surface mounting in close proximity to other components on assembly board. Units are rated for operating temperature of 40-85°C. Applications include notebooks, PCs, flash memory devices, converters, and other electronic systems.

Advanced Power Technology - Europe    Merignac 33700  France
Dec 13, 2005 Offered in SP3, SP4, and SP6 packages, 100 V MOSFET Modules are available in single switch, buck, boost, dual common source, phase leg, full bridge, asymmetrical bridge, dual boost, and dual buck configurations. With 12 mm height for SP3 package and 17 mm height for SP4 and SP6 packages, modules exhibit minimal internal parasitic resistance and inductance. Applications include motor control, power supplies, and battery-operated equipment from 24-48 V.

Linear Technology Corp.    Milpitas, CA 95035
Dec 12, 2005 Designed for modules or power supplies with or without access to feedback pins, Model LTC2926 enables variety of power up and power down profiles and supports up to 2 slave supplies that track master signal. Tracking of up to 2 dc/dc modules is achieved with N-channel MOSFETs in series with power path, and 2 integrated remote sense switches automatically compensate for voltage drop across MOSFETs. IC is housed in 20-lead SSOP or 4 x 5 mm QFN package.

Linear Technology Corp.    Milpitas, CA 95035
Dec 12, 2005 With input range of 2.75-9.8 V, 2-phase, dual step-down switching regulator, Model LTC3736-2 deliver outputs as low as 0.6 V. Constant frequency current mode architecture with MOSFET VDS sensing eliminates need for sense resistors. By operating 2 controllers out of phase, power loss and noise due to ESR of input capacitance are minimized. Switching frequency can be programmed up to 750 kHz and externally sychronized from 250-850 kHz using phase locked loop.

Samtec, Inc.    New Albany, IN 47151 1147
Dec 12, 2005 Using threaded inserts to secure connectors to boards, One Piece Interfaces include dual row units on .0394 in. pitch with board spacings of .118, .236, and .394 in. and up to 50 pins/row. For low profile applications on .0394 in. pitch, board spacings of .025, .050, and .065 in. are offered with up to 30 contacts in single row. Systems on .100 in. pitch include 1-piece power interfaces with .118 in. profile and up to 10 contacts, and signal interconnects with .150 in. profile and up to 30 contacts.