Lapp USA    Florham Park, NJ 07932
May 25, 2006 Offered in male coupler, female connector, and male inlet configurations for cable-to-cable and cable-to-machine requirements, EPIC® LS1 Circular Power and Mixed Power Connectors are available in 5 housing arrangements. They offer 5+PE contact configuration for power distribution and 3+PE+4 configuration for mixed power and signal requirements. Products suit power transmission and servo drive applications in plastics, printing, analytical instrument, robotic, and machine tool industries.

Faraday Technology Corporation    Hsinchu City 300  Taiwan
May 25, 2006 Along with 900,000 NAND-2 equivalent programmable logic gates, FIT-18 Template(TM) features 400 I/O pins, 98 of which can be configured for PCI/PCI-X interfaces. It is targeted at applications needing 5 V tolerant PCI/PCI-X I/Os in chip design. Implemented in 0.18 µm process, product provides 80 KB SRAMs in single- and dual-port configurations for en-route data buffering. Other on-chip functions include PLL, DLL, OSC, and power-on-reset.

GE Energy    Atlanta, GA 30339
May 25, 2006 Using sensors and mathematical models based on IEEE and IEC standards, Intellix MO150 monitors medium to large oil-insulated transformers used in transmission and distribution substations, power generation plants, and large industries. It also performs real-time, on-line transformer diagnostics for early detection of potential problems. System includes universal switching power supply, 10 years of memory storage, cooling control, and local display.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 24, 2006 CellMite(TM) Digital Signal Conditioners amplify, filter, and linearize output of strain gage sensors. CellView Multi-Display GUI software guides user through sensor calibrations and allows creation of up to 8 independent displays of data, each relating to specific sensor. User selects data source for display, unit of data, whether to record data from that display, and display name. Software allows data and test information to be saved for use with Excel.

Lamina Ceramics, Inc.    Westampton, NJ 08060
May 24, 2006 Able to replace other kinds of light sources, including tungsten filament, Atlas series features Lambertian light emission pattern that can be optically controlled. Atlas Warm White produces 100+ lumens, with red and orange color spectrum that emulates light output of 10 W halogen bulb. Atlas Daylight White has 200+ lumen output and is designed to replace fluorescents. Also available, Atlas RGB+ LED light engine can produce any of 16,000,000 saturated and blended colors.

Atmel Corp.    San Jose, CA 95131
May 24, 2006 Offered in 9 x 9 mm MLF64 and 7 x 7 mm MLF48 packages, ATR2732 and ATR2733 are DAB (Digital Audio Broadcast)/T-DMB (Terrestrial Digital Multimedia Broadcast) front-end ICs that provide RSSI information and work with different external circuitry. Dual-band ATR2732 covers VHF Band 3 and L-Band, while ATR2733 covers VHF Band 3 only. Interfaces are differential, providing immunity against external disturbances, and sensitivity of parts is -99 dBm.

STMicroelectronics    Lexington, MA 02421
May 24, 2006 Built into sensitive home and corporate telecom products such as phones and broadband modems, Series SMPxxMC Trisil Surge Arresters provide failsafe operation and exhibit no degradation over time. In event of extreme lightning surge, short circuit can protect equipment and anyone standing nearby. Silicon chips have no effect on strength of high frequency ADSL signal and are fully compatible with ADSL2 and ADSL2+ standards.

Bud Industries, Inc.    Willoughby, OH 44094
May 23, 2006 Featuring one-piece molded construction, Series CN includes flanged versions in 10 sizes from 3.52 x 1.38 x 1.22 in. to 8.75 x 5.74 x 2.25 in. and un-flanged models in 15 sizes from 2.36 x 2.16 x 1.22 in. to 10.81 x 6.89 x 2.64 in. Optional mounting flanges are molded to base of enclosure, allowing units to be opened without need to detach them from wall. Enclosures are suited for instrument cases, meter cases, and junction boxes in wet and dirty, marine, and washdown environments.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
May 23, 2006 Mounted in transportable, variable-height work platform, Mag EraSURE(TM) ME-P3E degausses magnetically recorded data from hard disks and tapes with nominal coercivity up to 5,300 Oe and 2,600 Oe, respectively. Array of permanent, high-energy rare-earth magnets enables unit to fully erase data and timing information in one 40-sec cycle. Automatic unit includes built-in hand crank that allows manual operation when power is not available.

Copley Controls Corp.    Canton, MA 02021
May 23, 2006 Designed for torque control of brushless servo motors, Model 800-1514 dual-axis servo amplifier accepts encoder and Hall feedback data. Drive torque is controlled by ±10 V command from motion controller or PLC. It operates on 20-55 V isolated dc supply and delivers independently controlled 4 A peak and 3 A continuous outputs for driving high performance 3-phase motors. Measuring 6.58 x 3.9 x 1.17 in., amplifier provides dual-channel status indicators and protection circuits.

Foster Transformer Co.    Cincinnati, OH 45223 2571
May 23, 2006 Models 15349 and 15964 are suited for international as well as domestic, commercial and industrial applications. Certified to UL 1585 as inherently limited transformer, model 15349 has input of 200/230 V @ 50/60 Hz, 24 V output, and capacity of 75 VA. UL-listed as industrial control transformer, Model 15964 has input of 120/240 V @ 50/60 Hz, output of 24 VCT, and capacity of 192 VA. Each size/model includes UL-Recognized Class 130 (B) insulation.

Underwater Kinetics    Poway, CA 92064
May 23, 2006 Built for firefighters and housed in ultra-high-impact ABS plastic casing that will not dent or corrode, UK4AA eLED Fire Light features waterproof, twist-and-turn on/off bezel and Projection Optical System, which has max center beam brightness of 40 lumens and ensures there are no whiteouts, flarebacks, or reflective sidelights in smoke-filled environments. Twin-element optical system creates 13° smoke-cutting beam for close-up viewing and smooth, even illumination.

STMicroelectronics    Lexington, MA 02421
May 19, 2006 Available in SOT23-5L or SO-8 package, TSH300 offers bandwidth of 200 MHz at gain of 5 V/V. It operates from 4.5-5.5 V on either single or dual supplies over -40 to +85°C temperature range. With slew rate of 230 V/µ and SFDR of 55 dBc, measured with 10 MHz output sine wave of 2 Vp-p into 100 ohm load, amplifier is suitable as component in A/D converter interface as well as high end industrial, medical, and instrumentation applications.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 19, 2006 Featuring input voltage of 3-6 V, dual-output Models TPS61140 and TPS61150 deliver up to 0.7 A output current and can manage 2 sets of 6 white LEDs from single IC plus inductor. Highly integrated, 1.2 MHz power conversion ICs eliminate need for external active power components. They provide 82% efficiency, up to 30 kHz PWM dimming frequency, and input to output isolation, as well as undervoltage, overvoltage, short-circuit, and over-temperature protection.

Z-Communications, Inc.    San Diego, CA 92126
May 18, 2006 Featuring phase noise performance of -96 dBc/Hz at 10 kHz offset from carrier, PSA4176C-LF coaxial resonator oscillator based Phase Locked Loop (PLL) synthesizer meets data rate demand of Point to Point applications such as stable carrier generators. It operates at supply voltage of 5 Vdc and spurious suppression of -70 dBc. Unit measures 0.866 x 0.630 x 0.22 in. and is available in tape and reel packaging. Ideal for automated surface mount assembly and reflows.

Z-Communications, Inc.    San Diego, CA 92126
May 18, 2006 RoHS-compliant V950ME09-LF, suited for demanding test and measurement systems, achieves single side band phase noise specification of -89 dBc/kHz @ 10 kHz offset from carrier. Operating at 12 Vdc supply and drawing 58 mA typ, product covers frequency range of 4,200-5,000 MHz from 1-12 Vdc of control voltage and has typ tuning sensitivity of 124 MHz/V. Unit comes in 0.50 x 0.50 x 0.22 in. SMT package and offers second harmonic suppression of better than -18 dBc.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
May 18, 2006 Measuring 6 mm wide, DSS.4 double level knife disconnect DIN rail mounted terminal block is UL recognized and rated for 24-10 AWG, 600 V, and 24 A. It has feed through connection on bottom level and knife disconnect on upper level. Lever/knife disconnect is colored green to allow users to determine visually which circuit is open. Wire termination is accomplished with screw clamp method, and housing is molded with UL 94V0 material.

Performance Motion Devices, Inc.    Lincoln, MA 01773
May 18, 2006 Available for dc brush, brushless dc microstepping, and step motors, Magellan(TM) motion control ICs handle conditions such as motion error, positive and negative limit switches, position breakpoints, and commutation monitoring. Chips allow users to define and initiate motion-related actions such as smooth stop, abrupt stop, or system disable upon occurrence of user-defined conditions. Hardware trace buffer can be used to collect long-term performance data.

Stackpole Electronics, Inc.    Raleigh, NC 27604
May 18, 2006 Series RAV16-4D provides isolated resistor network that consists of four 0603 size resistors in one 1206 size package. It offers 1% and 0.5% tolerances, available in E24 values from 10 ohm to 330 kohm, and 0.1% tolerance, available in E24 values from 100 ohm to 33 kohm. Featuring 100% matte tin terminations, RoHS-compliant series has operating voltage of 75 V and power rating of 63 mW per element.

Weidmuller, Inc.    Richmond, VA 23236
May 18, 2006 Featuring touch-safe design, WTL 4/2 STB Disconnect Test Terminal Block makes it possible to open busbar in terminal and for adapter to make contact with single action. Make-before-break design assures continuous operation of circuit during test procedure. Combi-foot makes unit suitable for TS-32 and TS-35 DIN-rail mounting, and only screwdriver is needed to connect test cable with test adapter. Terminal block is UL rated to 300 V, 8 A, and 26-10 AWG.