Bomar Interconnect Products    Ledgewood, NJ 07852
Sep 07, 2007 Accommodating medium to miniature-sized RG coaxial cables including RG-8, RG-58, RG-141, and RG-225, male Type N connector ensures performance characteristics throughout 0-18 GHz. Weatherproof, medium-sized RF connector is suited for base stations, cellular antennas, RF and microwave components, SATcom, broadcast, PCS (personal communications services), test and measurement equipment, microwave radio, and radar. It provides low reflection factor with VSWR of 1.30.

Industrial Indexing Systems, Inc.    Victor, NY 14564-9795
Sep 07, 2007 Performing at ambient operating temperatures up to 55°C, Model ESD-50/CEP delivers 50 A continuous with dc bus voltage of 620 V and maximum output of 100 A, while Model ESD-25/CEP delivers 25 A continuous and 50 A output. They can be used as standalone indexing or positioning controllers in master/slave motion applications, or as part of multi-axis system on SERCOS network. Up to 16 servomotors and I/O can be synchronized using IIS Emerald Series SERCOS master controller.

MagnaChip Semiconductor    Cheongju-si,Chungbuk   Korea (south)
Sep 07, 2007 Offering WQVGA (240 RGB x 432) resolution and 260,000 colors, Model PA7551 Low Temperature Poly Silicon (LTPS) LCD driver chip supports Mobile Display Digital Interface (MDDI). It includes various video conversions such as screen split and rotation, and is embedded with EEPROM. Product offers low power consumption suitable for mobile devices, with partial display mode, refresh rate control, and output buffer bias conversion function.

IRC    Corpus Christi, TX 78411
Sep 06, 2007 Compatible with automatic placement equipment, PFC Divider Series is available with TaNFilm® Tantalum Nitride technology or Tantalum Ultride(TM) technology. TaNFilm unit has power rating of 250 mW and provides resistance range of 10 W to 150 kW, while Tantalum Ultride unit features power rating of 50 mW and resistance from 1-50 KW. Both include wrap-around terminations with non-leaching nickel barrier.

Microsemi Corp.    Scottsdale, AZ 85251
Sep 06, 2007 Employing NPT technology, Thunderbolt HS(TM) insulated gate bipolar transitor (IGBT) Series is available as single devices or packaged with DQ Series Combi diode. Parameter distribution, combined with positive temperature coefficient, facilitate parallelling of Thunderbolt HS IGBTs, while switching loss enables operation at switching frequencies over 100 kHz. Rated at 600 V and 2.8 V typ V(CE(ON)), products come in 20, 30, and 50 A versions.

Crystek Corp.    Fort Myers, FL 33907
Sep 06, 2007 CVCO55CW-1000-2000 offers control voltage range of 1-20 V and features typical phase noise of -100 dBc/Hz at 10 kHz offset. Input voltage is 10.0 V, with maximum current consumption of 25 mA, while Pulling and Pushing are minimized to 8.0 MHz and 2.5 MHz/V, respectively. Second harmonic suppression is -10 dBc typical and units are suited for digital radio equipment, fixed wireless access, satellite communications systems, and base stations.

Linear Technology Corp.    Milpitas, CA 95035
Sep 06, 2007 Operating from input voltage of 4-24 V, LTC3610 can deliver up to 12 A continuous output current at voltages as low as 0.6 V. It features valley current control architecture with switching frequencies of up to 1 MHz and operating frequency set by external resistor. Internal switches with RDS (ON) of 12 and 6.5 mW deliver efficiencies up to 95% and unit can be configured for discontinuous or forced continuous operation.

Allegro MicroSystems Inc.    Worcester, MA 01615
Sep 06, 2007 Housed in TO-3P package, Models STD01N/P and STD02N/P are designed specifically for home and professional audio amplifier markets. Units provide built-in thermal compensation diode on same die, eliminating any delay for thermal compensation operation and any delay between thermal sensing at heat source and response at compensation area.

Amimon Inc.    Santa Clara, CA 95054
Sep 06, 2007 Based on video modem approach, WHDI(TM) Wireless High-Definition Interface Chipset supports delivery of uncompressed 1,080 p in 40 MHz channel, in 5 GHz unlicensed band, in compliance with FCC regulations. Chipset makes it possible for wireless HD video connectivity net that allows devices to share HD content through entire home, up to 100 ft through walls. It can be embedded into CE devices such as LCD and plasma HDTVs, multimedia projectors, A/V receivers, and set-top boxes.

Crystek Corp.    Fort Myers, FL 33907
Sep 06, 2007 Suited for applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations, Model CVCO55CW-0100-0200 VCO features typical phase noise of -108 dBc/Hz at 10 kHz offset and 5.0 V input voltage with max current consumption of 25 mA. Pulling and Pushing are minimized to 2.0 MHz and 2.0 MHz/V, respectively, while second harmonic suppression is -10 dBc typical. Unit comes in 0.5 x 0.5 in. SMD package.

BI Technologies Corp.    Fullerton, CA 92835-1051
Sep 05, 2007 Available with linear and audio tapers, RoHS-compliant Model P260 is sealed for use in dusty or contaminated environments and features conductive plastic element with up to 6 gangs. Square 12.7 mm potentiometer, with 0.5 W power rating, has IP66 ingress protection and is offered with various detent and rotary switch options. Besides resistance from 500 W to 1 MW, characteristics include tolerance to ±10%, max input voltage of 350 Vac, and dielectric strength of 1,500 Vac.

Fujitsu Microelectronics Inc.    San Jose, CA 95134 1804
Sep 05, 2007 Built on 90 nm process technology, MB86H52 compresses full HD (1,920 x 1,080) MPEG-2 video data to H.264 data, less than half its original size. This enables transmission of full HD video over narrow bandwidths while maintaining video quality. Suited for high-volume consumer products, transcoder operates at 216 MHz internal frequency and incorporates DDR2 memory with 324 MHz interface. Power requirements are 2 W, with 1.2 V typ during HD transcoding.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Sep 05, 2007 Available in 3 x 3 mm TDFN package, Model AAT1112 supplies up to 1.5 A output current from 2.4-5.5 V input, while Model AAT1145 supplies up to 1.2 A. Both constant frequency, current-mode units convert Li-Ion battery input to 3.3 V output at full rated current and require no external compensation components. Output voltage can be regulated from 0.6 V to V(IN). Devices help extend battery life by running at 100% duty cycle for low dropout operation.

Anadigics, Inc.    Warren, NJ 07059
Sep 05, 2007 Targeting WiFi-enabled smartphones and consumer electronics products, Models AWL9230, 9231, and 9232 each incorporate power amplifier, low-noise amplifier, Bluetooth path, and RF antenna switch in package measuring 3 x 3 x 0.55 mm. Model AWL9230 achieves 3.5% EVM and draws 140 mA at output power of +19 dBm, while AWL9231 achieves 3.5% EVM and draws 135 mA at +18 dBm. For higher-power applications, AWL9232 achieves 3.5% EVM and draws 175 mA at output power of +21 dBm.

Spreadtrum Communications Corp.    Sunnyvale, CA 94085
Sep 05, 2007 Supplied in 257-ball LFBGA package, SC6600R GSM/GPRS mobile baseband IC is based on single-chip technology. Integrated multimedia functions include support for 2-megapixel digital camera and video camera, CD-quality music playback, stereo sound output, 30 fps MPEG4 playback, and Bluetooth interface. Low-power design features 3 V for I/O, 1.8 V for core, and GPRS Multi-Slot Class 10.

Spreadtrum Communications Corp.    Sunnyvale, CA 94085
Sep 05, 2007 Optimized for music-enabled mobile phones, SC6600H is supplied in 240-ball LFBGA package and enables music playback functions with CD-sound quality. This GSM/GPRS multimedia baseband chip includes optimizing functions such as support for half rate, full rate, enhanced full rate, and adaptive multi-rate voice codec. Simultaneously, SC6600H also supports GPRS multi-slot Class 10 voice recording and Bluetooth interface. Low-power design offers 3 V for I/O and 1.8 V for core.

Allegro MicroSystems Inc.    Worcester, MA 01615
Sep 05, 2007 Featuring on-chip oscillator, A6281 3-channel constant-current LED driver controls brightness via 10-bit PWM per channel, complemented by 7-bit analog current control per channel to adjust color balance. It drives up to 150 mA per channel and operates from supply voltage of up to 17 V. Clock, serial data, latch, and output enable control signals are buffered on chip to drive next pixel in daisy-chained cascade. Pixel spacing can range up to 10 ft.

Telegartner, Inc.    Franklin Park, IL 60131
Sep 04, 2007 Providing transmission rates of up to 40 Gb, STX connectors resist dust, moisture, and chemicals as well as mechanical and electromechanical loads. Gigabit-capable devices meet standardized IEC 61076-3-106 specification and are in full compliance with IP 67 requirements for environmental protection.

Altera Corporation    San Jose, CA 95134
Sep 04, 2007 Featuring 150K logic elements, EP3SL150 is 65 nm Stratix® III FPGA that complies with JEDEC DDR3 SDRAM standard, including read and write leveling to DIMMs as well as devices. I/O blocks are embedded with all timing-critical circuits, and Programmable Power Technology enables every programmable logic array block, DSP block, and memory block to operate independently at high-speed or low-power mode, automatically controlled via PowerPlay feature in Quartus II software.

Atmel Corp.    San Jose, CA 95131
Sep 04, 2007 Supplied in 3 x 3 mm QFN open packages, ATR1841 and ATR1842 are designed for use in optical pick-up units of slim and ultra-slim HD-DVD and Blu-ray drives. Devices support all wavelengths used in CD, DVD, and HD-DVD/Blu-ray drives and have serial interface that allows manufacturers, using firmware, to change between 3 gain modes as well as adjust gain by ±6 dB in each mode. Products offer channel bandwidth over 160 MHz while maintaining noise level of less than -80 dBm.