Touchstone Semiconductor    Milpitas, CA 95035
Oct 12, 2011 Supplied in 5-pin SOT23 packaging, TSM9938F and TSM9634F are pin-compatible and functionally identical to Maxim Integrated Products' analog ICs. Both current-sense amplifiers operate from +1.6 to +28 V, consume no more than 1 µA supply current and offer 50 V/V fixed gain option. They are designed for battery monitoring/management, power management applications, over-current and fault detection, lamp monitoring, motor control as well as for mobile and hand-held personal communication devices.

Powerex, Inc.    Youngwood, PA 15697
Oct 11, 2011 Combining NFH-Series Powerex IGBT with Zero Recovery® Schottky diode, split dual Si/SiC hybrid IGBT modules QID1210005 and QID1210006 are designed for hard switching applications upwards of 30 kHz and soft switching applications from 60-80 kHz. Individual modules feature 2 IGBT transistors, each having reverse-connected Zero Recovery free-wheel silicon carbide Schottky diode. All components and interconnects are isolated from heat sinking copper or AlSiC baseplate.

ZMDI    Dresden 01109  Germany
Oct 11, 2011 Offering 0.25% accuracy and one-pass, digital calibration, ZSSC3123 corrects 1st-order and 3rd-order nonlinearity errors. It connects to MCUs but can also be utilized in stand-alone designs for transducer and switch applications. IC can be configured to interface with 0.5-260 pF capacitive sensors, with sensitivity as low as 125 aF per digital bit. While operating current is as low as 60 µA over 2.3-5.5 V range, built-in sleep mode lowers consumption to less than 1 µA.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Oct 11, 2011 Implemented in mixed-signal, sub-micron silicon process technology, 8-channel TB62D701 and 4-channel TB62771 can respond to pulse signal as low as 500 nsec. Channels of TB62D701 can be individually programmed to any desired level with its 8 independent PWM inputs. Each of 8 MOSFETs in TB62D701 drive up to 150 mA and 58 V, while each of 4 MOSFETs in TB62771 drive up to 200 mA and 45 V. Products also integrate DC-to-DC boost controllers.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Oct 10, 2011 Available in .045 and 1/16 in. diameters, SelectAlloy 16-8-2 Electrodes are composed of 15.5% chromium, 8.5% nickel, and 1.5% molybdenum. Flux cored SelectAlloy 16-8-2-AP, designed to weld in all positions, delivers flat, well washed beads, while metal cored SelectAlloy 16-8-2-C wire provides smooth, spray arc transfer and produces little or no slag. Both gas-shielded electrodes are suitable for welding 16-8-2, 316, and 347 grades of stainless steel in high-temperature piping systems.

Fulham Worldwide    Hawthorne, CA 90250
Oct 10, 2011 Solid-state, dimmable PONY® Halogen Electronic Transformers are available in 60, 75, 150, and 300 W linear and 300 W circular units. Performing in ambient temperatures up to 50°C max, these 12 V, 50/60Hz transformers use UL recognized components and operate multiple dimming and non-dimming MR16 and MR11 lamps to stated wattage. Short circuit, overload, thermal protections are all standard.

Crystek Corp.    Fort Myers, FL 33907
Oct 07, 2011 Operating from 2,005-2,070 MHz with control voltage of 0.1-4.9 V, Model CVCO55CCQ-2005-2070 features typical phase noise of -114 dBc/Hz at 10 kHz offset. Input voltage is 5 V, with max current consumption of 40 mA. Pulling and Pushing are minimized to 2.0 MHz and 0.5 MHz/V, respectively, and second harmonic suppression is typically -15 dBc. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited for digital radio equipment, fixed wireless access, and base stations.

VISIONx, Inc.    Pointe Claire, QC H9S4K9  Canada
Oct 07, 2011 CAD Auto-Align and Auto Pass/Fail software tools for the VisionGauge® Digital Optical Comparator (Patents Pending) offer real-time, automatic comparison of part-to-CAD data. Auto-Align tool supports both X-Y and X-Y-Rotation alignment of CAD drawing to part and takes less than 2 seconds to produce results. Auto Pass/Fail tool, designed to determine if part is within tolerance, can be point-based or can consider complete geometric entities.

Kemet Electronics Corp.    Greenville, SC 29606
Oct 07, 2011 Operating from -55 to +125°C, surface-mountable Tantalum Stack Polymer (TSP) Series target applications requiring capacitance from 66-4,080 µF and low ESR but with limited board space. Stack solution utilizes organic conductive polymer as cathode plate of capacitor and can be specified with variety of capacitance and performance characteristics by stacking 2, 3, 4, or 6 standard EIA case size discrete components into one device. Voltage rating is 3-35 Vdc, and surge options are available.

Broadcom Corp.    San Jose, CA 95110
Oct 06, 2011 Featuring multi-mode ADSL2+/VDSL2 transceiver, BCM63168 Integrated Access Device (IAD) SoC enables carriers to meet increasing demand for triple play services. Further integration includes dual-band selectable 802.11n, gigabit Ethernet switching, DECT, VoIP, packet and QoS acceleration, and xDSL transceiver, supporting channel bonding and G.vector in one chip. Also, remotely manageable and eCOC-compliant solution features multi-channel HD voice and expansion ports such as PCIe and USB.

Atmel Corporation    San Jose, CA 95131
Oct 06, 2011 Offered in 5 x 7 mm QFN38 package, ATA5790N AVR® MCU includes LF immobilizer and 3D LF receiver. There is 16k Flash - 14k for application software, 2k for immobilizer - and 2k EEPROM. When combined with companion device, ATA5830 RF transmitter, MCU suits high-volume uni- and bi-directional car key fobs for passive entry and start systems. Along with protocol stack, AES-128 cryptographic engine maximizes security via accelerated authentication. Listening mode draws less than 4.5 µA.

OSRAM Opto Semiconductor    San Jose, CA 95134
Oct 05, 2011 With dimensions of 5.8 x 4.6 mm and output of 85 lm per mm² of footprint, OSTAR Compact 2x2 is suited for high-power projectors in commercial and domestic sector. Unit contains two 2 mm² chips and is designed specifically for imager diagonals between 0.4 and 0.55 in. With one set of red, converted green, and blue LEDs, it is possible to achieve luminous flux of 400 lm from projector.

GlacialLight    New Taipei City 235, R.O.C  Taiwan
Oct 05, 2011 Accepting voltages from 100-240 V, Model MR1605AC uses Nichia LED technology with non-dimmable 50° beam and 30,000 hour lifetime. GL-MR1605AC-CW version provides bright daylight illumination at 5,000 K with CRI of over 70, while GL-MR1605AC-WW model illuminates with warm 3,000 K beam and CRI better than 80. Available with variety of bases, 5 W lamp is suited for spot, architectural, commercial, retail, accent, hallway, and cabinet lighting applications.

ERICSSON INC.    PLANO, TX 75024
Oct 05, 2011 Suited for space-critical applications, 12 A BMR462-SIP (BMR4622002) and 20 A BMR463-SIP (BMR4632002) come in 20.8 x 7.6 x 15.6 mm and 26.3 x 7.6 x 15.6 mm SIPs, respectively, and deliver power densities of 38 and 33 W/cm². Both devices, based on digital-core controller combined with MOSFET technology and built-in energy-optimization algorithms, offer 66 W of power, 4.5-14 V input, and typ power efficiency of 97.1% at 5 V input, 3.3 V output, and half load.

J.W. Speaker Corporation    Germantown, WI 53022
Oct 05, 2011 Offering safe and energy-efficient alternative to high intensity discharge lights and bulb-based scene lights, Model 623 is available with choice of 3 beam patterns - wide, medium, or narrow flood - and 2 voltage configurations: 24 Vdc and 80-270 Vac. Lens remains cool to touch, helping prevent burns and fires, while vibration-resistant light source and die-cast aluminum housing lend to overall durability. Sealed to IP67, lamps suit OEM and retrofit applications.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Oct 05, 2011 With up to 1 Gbps wire data rate, ITU-T G.hn Compliant Chipset operates over any wire medium, including coax, phoneline, and powerline, optimizing distribution of bandwidth-intensive and real-time applications such as HD IPTV, VoIP, gaming, and multi-room DVR. Chipset supports bridging, smart repeating, full TCP/IP stack, and IP-multicast. Additional features include embedded TR-069 and TR-111 remote management clients and security to meet contemporary threat model.

Kaben Wireless, Inc    Ontario   Canada
Oct 05, 2011 Implemented in 65 nm RF-CMOS process, programmable and via-configurable RF array (RF-VCA) enables integration of ARM processors, proprietary digital circuits, and custom RF receivers into small designs. RF-VCA contains 2 complete RF receiver signal chains that can be configured for applications such as GPS, cellular base stations, cognitive radio, military receivers, FM tuners, ISM-band receivers, and MRI channels. Device handles applications spanning frequencies from DC to 3GHz.

Broadcom Corp.    San Jose, CA 95110
Oct 05, 2011 HomePlug® AV 1.1 certified and IEEE 1901 compliant, 40 nm BCM60321 Powerline Networking SoC combines analog and digital front end with line driver, modem, and memory in 9 mm 76-pin QFN package. Device provides repeating, channel bonding, failover, and load balancing for layer-2 in multi-mode home networks. Consuming less than 2.5 W when ON and less than 0.5 W in standby, Model BCM60321 supports remote network management and diagnostics for ISP deployments.

Broadcom Corp.    San Jose, CA 95110
Oct 05, 2011 Removing DSL crosstalk interference, BCM65300 VDSL2 G.vector Central Office SoC proliferates high-speed Internet, IPTV, and mobile broadband services. G.vector increases VDSL2 coverage, almost doubling reach of 50 Mbps and 100 Mbps services to 1 km and 400 m, respectively. SoC supports direct Gigabit Ethernet connectivity, all bands ADSL2+ through 30 MHz VDSL2, and high capacity vectored services with integrated ATM and PTM channel bonding capability.

Exar Corp.    Fremont, CA 94538
Oct 05, 2011 Operating from 1.65-3.6 V with 5 V tolerant inputs, Series XRA120x supports I2C/SMBus(TM) frequency up to 400 KHz, while Series XRA140x works with SPI(TM) clock frequency up to 26 MHz. When configured as input, each GPIO has internal pull-up resistor that can be enabled or disabled. Polarity of input can also be inverted, and with filters on each input, noise or glitches are ignored. Interrupt can be configured to generate interrupt on rising edge, falling edge, or both edges.