Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 09, 2008 Operating from AC adapter or USB port, Model AAT3663 features Digital Thermal Loop charge reduction circuit, which monitors internal die temperature and gradually steps down charge current to avoid thermal shutdown. Device operates across 4.0-13.2 V input range and supports user-programmable charge current from 100 mA to 1 A via external resistor. Programmable charge termination current feature sends device into sleep mode if charging current dips below pre-defined threshold.

Alpha & Omega Semiconductor, Inc    Sunnyvale, CA 94085
Jan 09, 2008 Suited for powering wide range of networking, consumer, and industrial applications, Models AOZ1210 and AOZ1212 are rated at 2 and 3 A, respectively. Current-mode PWM step down regulators come with integrated high side NMOS switch, and feature discrete MOSFET technology that enables RDS (ON) as low as 70 mW. Duty cycle can be adjusted from 6-85%, allowing wide range of output voltages with 0.8 V minimum output voltage.

AR RF/Microwave Instrumentation    Souderton, PA 18964
Jan 09, 2008 Model 350AH1 is 350 W, 10 Hz to 1 MHz magnetic immunity amplifier that is used for susceptibility testing for magnetic and audio frequency tests in MIL-STD-461D/E, D0160D/E, and variety of automotive test standards. Unit can also be used as ac voltage source for watt-meter calibration and as driver for higher-power amplifiers. It is powered by switching supply with auto-ranging ac input circuitry that automatically accepts voltages from 90-260 Vac in 47-63 Hz frequency range.

AR RF/Microwave Instrumentation    Souderton, PA 18964
Jan 09, 2008 Model KMW2051 provides 200 W continuous output power with high intermodulation performance. Unit can be used in systems requiring more than 1 simultaneous carrier, as well as wide variety of general communication and manufacturing test applications.

Supertex Inc.    Sunnyvale, CA 94619
Jan 08, 2008 Models HV2631 and HV2731 high-voltage, 16-channel analog switches deliver high resolution imaging in medical ultrasound applications and also suit non-destructive testing applications. The outputs of both ICs are configured as 2 sets of 8 SPST analog switches that feature low typical on-resistance of 22 W, minimizing signal attenuation in receive mode and providing 2 A current capability in transmit mode. Switches are available in 28-lead LQFP packages.

NEC Electronics    Santa Clara, CA 95050
Jan 08, 2008 Designed to perform interface and I/O control functions, miniature CMOS-10HD Series includes 2 devices that offer 6,793 usable ASIC gates and 2 models with 21,118 usable ASIC gates. Devices are manufactured using 0.25 micron process with 3 or 4 metal layers, and operate with 2.5 and 1.8 V power supplies. All are available in quad-flat QFN packages suitable for design of consumer products and telecommunications equipment.

Crown Controls, LLC    Derby, CT 06418
Jan 08, 2008 Featuring fully digital design, Thyristor Power System has 1-, 2-, or 3-phase power unit to 690 Vac and 1,600 A for controlling voltage applied to loads such as heating elements. Phase control, zero crossing, PID input, and local potentiometer control are standard, while RS-485 communication is optional. Applications include heaters, electrolysis, multi-zone heating, voltage-controlled devices, and dimming of high-power loads.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Jan 08, 2008 Offered in 4- or 6-pole models, 16-channel, 2U rack-mounted Model 4999 supplies excitation current to IEPE type sensors and remote charge converters, and includes input ground isolation to eliminate ground loops. Although broadband noise is specified at less than 30 µV RMS, unit actually measures at less than 15 µV. Front-panel-selectable, low-pass cutoff frequencies are configurable at factory with frequency corners of 400, 800, 1,600, 3,200, 6,400, 12,800, and 25,600 Hz ±2%.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Jan 08, 2008 Serial RapidIO-based central packet switches (CPS) are capable of routing packets for distribution among DSPs, processors FPGAs, other switches, or any other serial RapidIO-based devices. They can also be used in serial RapidIO backplane switching. Model CPS-16 offers support for up to 16 ports of 1x or 4 ports of 4x (or combinations of 1x/4x), while Model CPS-12 provides 12 ports 1x or 3 ports 4x (or combinations), and Model CPS-8 provides 8 ports 1x or 1 port 4x with 4 ports 1x.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 08, 2008 Offered in 3 x 3 x 0.8 mm, 16-pin TQFN package that has 0.5 mm contact pitch, Model MAX9235 is 10-bit, 400 Mbps, LVDS serializer that serializes 10-bits of LVTTL/LVCMOS data into single LVDS serial data stream and then deserializes that single LVDS serial input into 10 single-ended LVTTL/LVCMOS outputs. It operates from 3.3 V ±10% core supply, can lock to parallel clock in 16-40 MHz range, and is fully specified over -40 to +105°C operating temperature range.

Catalyst Semiconductor    Sunnyvale, CA 94089
Jan 08, 2008 Suited for digital photo frames and other backlighting applications, Model CAT4139 boost converter provides switch current up to 750 mA and drives LED strings up to 22 V. It uses 1 MHz fixed frequency switching architecture to enable low noise applications, and features high voltage CMOS output stage that allows 5 LED strings to be accurately biased and regulated from low voltage input supply. Designers can control LED dimming using dc voltage, logic signal, or PWM signal.

LEDtronics, Inc.    Torrance, CA 90505
Jan 08, 2008 Engineered to handle variations in voltages accompanying noisy/dirty ac or dc power supplies, LED MR16 bulb eliminates potential burnout from incoming voltage that is higher than lamp's capacity. Unit delivers light outputs of 102.9, 120.6, and 140.7 lumens using 2.6 W with 12 Vdc, 3.7 W with 12 Vac, 3.8 W with 24 Vdc, respectively. Bulb features 3 LEDs, and is offered in Cool White (6,500 K) and Warm White (3,000 K) color temperatures with 61° beam angles.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 08, 2008 Including two 60 V devices in PowerPAK® 1212-8 package, automotive AEC-Q101-qualified TrenchFET® power MOSFETs measure 3.3 x 3.3 x 1.07 mm. Siliconix n-channel SQ7414EN comes with on resistance of 25 mW at 10 V gate drive, while p-channel SQ7415EN features on-resistance rating of 65 mW. With junction-to-case thermal resistance of 2.4°C/W, devices can address all automotive applications including engine controllers, transmission controllers, and motor drives.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 08, 2008 Model MAX2769E/W is universal, global navigation satellite system (GNSS) receiver for GPS, Galileo, and GLONASS navigation satellite system. Integrated delta-sigma fractional-N frequency synthesizer allows IF programming with ±40Hz accuracy, while on-chip ADC outputs 1 or 2 quantized bits for both I and Q channels, or 3 quantized bits for I channel. Fully specified for operation over -40 to +85°C extended temperature range, unit is available in 28-pin TQFN package.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 08, 2008 Suited for Fibre Channel, Ethernet, 10G Ethernet, SONET/SDH, InfiniBand, GPON, BPON, PCI Express, and SAS/SATA applications, Series DS4-XO crystal oscillators come in 5 x 3.2 mm package. They provide 75-622.08 MHz, low-noise performance over entire -40 to +85°C extended temperature range. Devices integrate PLL circuit to enable high-frequency operation and thermal pad that enables high-current (65-75 mA, typ) applications.

IRC, Advanced Film Div.    Corpus Christi, TX 78411
Jan 07, 2008 Rated at 10 W when heatsinked, PAT3060P RF Power Attenuator features frequency range from DC-10 GHz with VSWR of less than 1.3 at 10 GHz, and attenuation values of 0-10 dB and 20 dB. With power ratings to 250 W, surface-mount RFTF Terminator ranges from DC-3 GHz with VSWR of less than 1.1 at 3 GHz and stray capacitance of less than 0.1 pF at 250 W. Both are suited for RF power meters, RF and microwave power amplifiers, radar, satellites, and avionics.

Atheros Communications, Inc.    Santa Clara, CA 95054
Jan 07, 2008 Integrating WLAN radio, baseband/MAC, and host PCIe interface into single-chip, Models AR9280 dual-band (2.4 and 5 GHz) and AR9281 single-band (2.4 GHz) solutions come in 10 x 10 mm QFN package. Providing 802.11a/g/n performance to support up to 300 Mbps physical data rates, Model AR9280 targets enterprise and high-end consumer notebooks. Model AR9281 features 1 x 2 MIMO PCIe configuration that delivers 300 Mbps PHY rates on receive side, providing up to 150 Mbps in transmit.

Ambric, Inc    Beaverton,, OR 97006
Jan 07, 2008 Intended for high-end applications that require multiple TeraOPS of processing such as image, signal, and video processing, wireless radio, and network security, Model Am2045B(TM) can run up to 350 MHz. Users can create reusable software objects and route them across MPPA. TeraOPS-class massively parallel processor array (MPPA) device features 336 32-bit processors, uses SOPM tools, and maintains software compatibility with full Am2000 family.

AMI Semiconductor, Inc.    Lower Gwynedd, PA 19002
Jan 07, 2008 Designed for long-wire and low baud rate Controller Area Network (CAN) applications, ASSP transceivers enables use of CAN-enabled equipment in industrial applications requiring line lengths in excess of 500 m. Including Models AMIS-42670 (5 V), AMIS-42671 (3.3 V, auto-baud rate), AMIS-42673 (3.3 V), AMIS-42675 (low power), and AMIS-42770 CAN repeater, units feature pin-out and functionality and ±45 V (common mode) overvoltage protection on CAN bus.

Fairchild Semiconductor    San Jose, CA 95134
Jan 07, 2008 Integrating 1 driver IC, 3 power MOSFETs, and 1 Schottky diode, Models FDMF8704 and FDMF8704V come in 8 x 8 mm MLP package. Suited for applications such as servers that need to maximize efficiency, Model FDMF8704 is capable of operating at 1 MHz, eliminating passive components to reduce board space, while Model FDMF8704V features built-in voltage regulator block for applications with only 12 V rail available. RoHS-compliant units meet J-STD-020 standard.