Atmel Corporation    San Jose, CA 95131
Oct 27, 2011 Designed to support consumer markets in 2.4 GHz ISM band, AT86RF232 supports ZigBee® RF4CE specification as well as automatic antenna diversity to maximize RF performance and link reliability. Onboard AES encryption promotes secure wireless end-to-end communication, while 1.8-3.6 V voltage range, -100 dBm in sensitivity, and 3 dBm output power help extend battery life. Other features include 11.8 mA receiver current consumption, 13.8 mA transceiver current consumption.

austriamicrosystems AG    Premstatten   Austria
Oct 26, 2011 Available in WL-CSP packages, AS364x family ranges from high light output 2000 mA flash LED drivers to cost-efficient 320 mA flash LED drivers. They feature DC-DC boost converter with 4 MHz operation, I2C programmable output currents and timings, variety of security features, as well as features for improving picture quality in mobile environment. Each device in operates directly from a Li-Ion battery between 2.7-4.4 V over a -30 to +85 °C temperature range.

Quickfilter Technologies, Inc.    Allen, TX 75002
Oct 26, 2011 Inserted into audio serial digital data path, QF3DFX Profound Sound(TM) Processor operates at up to 48 kS/sec and is configured using QFPro(TM) Design Software with user-tunable audio algorithms for psychoacoustic effects, such as bass enhancement, high frequency restoration, and virtual surround sound. Self-booting 3-channel device supports 16- or 24-bit resolution, can be configured to interface with I2S or TDM based audio systems, and automatically powers down when audio data is not present.

FUTEK Advanced Sensor Technology, Inc    Irvine, CA 92618
Oct 26, 2011 Compliant for all medical, industrial, and consumer applications, CSG110 is available in 1 or 10 kHz bandwidth versions and supports modification to support 25 kHz option. RoHS-compliant product, designed for minimal noise output, features short-circuit and over-voltage protection, comes in ABS-94HB black enclosure, and features DB9 connectors. Enclosed with DIN rail mount, product is constructed with DIP switches instead of soldered internal components.

TE Connectivity Ltd.    Berwyn, PA 19312
Oct 26, 2011 Supplied as one-piece, press-fit assembly, CXP pluggable connector and cage support InfiniBand CXP 12x QDR standard and IEEE 100 Gbps Ethernet specification. Twelve channels support up to 10 Gbps data rates, and design also supports pluggable copper or optical transceivers as well as active optical cable options. With dual-sourced footprint that increases space between vias, product reduces cross-talk and improves electrical performance.

Maxim Integrated Products    Sunnyvale, CA 94086
Oct 26, 2011 Featuring ModelGauge(TM) m3 algorithm, which makes tiny corrections continually over time, Model MAX17047 eliminates sudden changes in battery state of charge. Coulomb-counting IC automatically compensates for aging, temperature, and discharge rate, providing accurate remaining capacity in mAh or charge percent and time-to-empty over range of operating conditions. Housed in 3 x 3 mm TDFN package using 25 µA, Model MAX17047 warns of abnormal battery conditions while maximizing runtime/standby time.

RF Connectors    San Diego, CA 92126
Oct 25, 2011 Suitable for technicians in cellular, PCS, GPS, and digital communications fields, RFA-4013-WB 7-16 DIN Adapter Kit with white bronze plating offers means to bridge type N devices to 7-16 DIN interfaces. White bronze plating, also called tri-metal, is tarnish-free and will stand up to multiple mating cycles. All adapters within 7-16 DIN series are made of machined brass with Teflon® insulation and silver-plated contacts.

Bliley Technologies, Inc    Erie, PA 16508-0428
Oct 25, 2011 Measuring 1.0 x 1.0 x 0.460 in., Apollo Series is suited for applications requiring noise performance out to 100 kHz offset. Devices offer power output of 15 dBm, tight stabilities of ±50 ppb over temperature, and low power consumption of 1.5 W at 25°C. Also available in RoHS-compliant version, oscillators are suited for medical imaging equipment, telecommunications, up/down frequency converters, transceivers, phase-locked microwave sources, and radar systems.

Quintech Electronics & Communications, Inc.    Indiana, PA 15701
Oct 25, 2011 Designed for Q-Flex 4RU modular chassis, Model QLA 2150 operates over 950-2,150 MHz frequency range and provides variable gain and slope compensation to optimize L-band signal strength through long cable runs and distribution networks. Compact line amplifier operates on +24 V power supply with 75 W impedance and gain range of 0 to +18 dB in 1 dB steps.

Phoenix Contact    Harrisburg, PA 17111 0100
Oct 24, 2011 Equipped with pluggable COMBI connectors in 4 mm² profile, UTME 4 series helps conserve space in control cabinet. Short-circuit plugs for make first, break last operation ensures CT circuit is shorted out prior to test and measurement. This prevents inadvertent actuation and improves safety for system as well as its operators. Screw-free knife disconnect lever helps operators see position of switch, and bridging channels are located on either side of disconnect lever.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Oct 24, 2011 Supplied in MICRO FOOT® 0.8 x 0.8 x 0.357 mm chipscale package, 8 V n-channel Si8802DB and p-channel Si8805EDB TrenchFET® power MOSFETs are suited for load switching in handheld devices. Respective on-resistance values for n- and p-channel MOSFETs are 54 and 68 mW at 4.5 V, 60 and 88 mW at 2.5 V, 86 and 155 mW at 1.5 V, and 135 and 290 mW at 1.2 V. These values minimize voltage drops across load switch, preventing unwanted UVLO. All versions are halogen free and RoHS compliant.

Microsemi Corp.    Scottsdale, AZ 85251
Oct 24, 2011 Suited for power transistors and diodes, U4 package is 70% percent smaller than U3 and offers Defense Logistics Agency (DLA) qualification for range of products. Devices assembled as vehicles for this package qualification included medium-power NPN and PNP bipolar transistors. With typical power rating of 5-15 W @ Tc=25C, package is constructed with aluminum nitride ceramic that optimizes heat dissipation to accommodate products such as power supplies, converters, and regulators.

Summit Microelectronics, Inc.    Sunnyvale, CA 94085
Oct 21, 2011 Housed in 5 x 6 mm QFN package, Models SMB220/SMB221 feature onboard MOSFETs that supply up to 10 A/20 A output current. Input voltage is +4.5 to +16 V and output voltage is +0.5 V to VIN, accurate to ±1.5% over load/line/temperature. With serial digital interface and on-board non-volatile memory, devices can be configured during development and re-programmed in system by host software. Output voltage is digitally programmable in 10 mV steps up to 2.5 V and 20 mV steps up to 5.0 V.

Triad Magnetics    Corona, CA 92883
Oct 20, 2011 Along with magnetics designed to eliminate common noise to all lines in power supplies, CMT-8100 Series features rugged construction for high-temperature applications in electronics operating environments. Series operates from -55 to +105°C, with rated current yielding temperature rise of ~35°C, and offers minimum inductance per winding from 1-50 mH, current rating from 1.7-20 A, and DCR range of 0.006-0.45 ohm. Products meet VDE, IEC, UL, and CSA requirements.

Analog Devices, Inc.    Norwood, MA 02062-9106
Oct 20, 2011 Comprised of low noise, digital phase frequency detector; precision charge pump; programmable reference divider; and high-frequency programmable feedback dividers, ADF41020 can be used to implement local oscillators as high as 18 GHz in up-conversion and down-conversion sections of wireless receivers and transmitters. Bandwidth lets designers potentially eliminate frequency-doubler stage, and complete synthesizer can be implemented if PLL is used with external loop filter and VCO.

ROHM Semiconductor USA LLC    San Diego, CA 92121
Oct 19, 2011 Enabling measurement of temperature, humidity, or carbon monoxide in small battery-operated devices, 8-bit ML610Q4xx Series features RC-type ADC that provides ±1.0°C accurate temperature measurement using only passive components. Versions are available with FLASH memory or masked ROM to store program that controls display, user interface, communication ports, and measurements. In-circuit programmable FLASH allows on-chip, non-volatile data storage and ability to make program changes in field.

RFX Limited    Scotland EH53 0TH
Oct 19, 2011 Housed in low-profile case measuring 36.0 x 26.5 x 8.5 mm, Model OX0325-1000-100 features 10 MHz CMOS output and frequency tolerance of ±0.02 ppm over 0-70°C temperature range. Oscillator runs from 5 V, draws 470 mA at switch-on, and averages less than 220 mA at 25°C after warm-up. Phase noise is -165 dBc/Hz at greater than 10 KHz offset. Mechanical shock, thermal shock and vibration can be specified to MIL standards.

Osram Sylvania, Inc.    Danvers, MA 01923
Oct 19, 2011 ULTRA LED A Line omni-directional light bulbs are available for replacement in two wattages. The 8 W is equivalent to 40 W incandescent and 13.5 W is equivalent to 60 W incandescent. ULTRA LED BR 30 and 40, which serve as replacements for equivalent 65 W incandescent models, come in 15 and 18 W varieties and offer options for spot or flood lighting. All products carry 25,000 hr life rating and produce soft white light (2700K).

austriamicrosystems AG    Premstatten   Austria
Oct 18, 2011 With start-up configuration programming capability, AS3710/11 can be adapted to various processors as well as for last minute changes or fine tuning without design re-spin. Both models include 3 DC/DC, 4 MHz, step-down converters; 2 DC/DC, step-up converters; 8 LDOs; 4 GPIOs; 1.5 A charger; I²C interface; 3 current sinks; ADC; watchdog timer; and RTC. While AS3710 adds third booster, AS3711 adds 3 A step-down converter. Configuration options include selecting linear or switching charging.

OKW Enclosures, Inc    Bridgeville, PA 15017
Oct 18, 2011 Available in 6 sizes from 2.95 x 1.73 x 0.94 in. to 4.72 x 2.63 x0.75 in., MINITEKAL SK sealed enclosures consist of extruded aluminum case body with 2 molded ABS end panels assembled by 8 self-tapping screws. Case extrusion includes series of internal guide rails for PCBs, and integrated TPU seal provides enclosures with protection classification of IP65. Also, end panels have contoured profile with recessed area for fitting connectors, controls, keypads, or labels.