Calex Mfg. Co., Inc.    Concord, CA 94520
Nov 02, 2011 Featuring built-in 10 V excitation supply that can drive 350 W bridge, Model 8555 is designed for load cell, strain gage, or single ended analog amplification and filtering. Self-contained, DIN rail mount, DC powered module has 0-50 mV input range and makes connections via screw clamp terminal blocks. Measuring 3.78 x 1.06 x 1.65 in., signal conditioner is suited for conveyor weighing systems, hoppers, or tank farms.

CUI, Inc.    Beaverton, OR 97005
Nov 02, 2011 Housed in SIP package measuring 11.50 x 9.00 x 17.50 mm, 500 mA Series V78W-500 offers alternative to linear regulators. Units feature input range of 9-72 V and regulated output voltages of 3.3, 5, 6.5, 9, 12, 15, and 24 Vdc with 95% efficiencies. Non-isolated converters come in both straight and right angle pin configurations. Operating from -40 to +85°C, devices include short circuit protection, over temperature protection, and MTBF of 2 million hours.

Clare Inc.    Beverly, MA 01915
Nov 02, 2011 Capable of providing 2.5 A of peak drive current, Model IX3120 features supply voltage range of 15-30 V and common mode rejection of 25 kV/µsec at VCM = 1,500 V. Input signal is provided by LED, which is optically coupled to IC that contains high-speed CMOS power output stage. This combination provides isolated driver capabilities without use of isolation transformers. Model IX3120 is suited for DC/DC converters, switched-mode power supplies, and solar inverters.

STMicroelectronics    Lexington, MA 02421
Nov 02, 2011 Designed to protect confidentiality and secure data stored in PCs and laptops, HardCache-SL3/PC includes cryptographic module certified to U.S. NIST FIPS 140-2 Level 3 standard for non-military applications. Hard-wired encryption engine embedded within chip performs all encryption/decryption algorithms that are needed each time system retrieves data stored from memory to central processor with no impact on performance. Product is fully supported by software drivers and development kit.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Nov 02, 2011 Supplied in RoHS-compliant, 6 x 6 mm QFN-40 package, PurePath Wireless(TM) CC8521 and CC8531 contain USB audio support for Windows®, Linux®, Mac OS® X, and Ubuntu® and can enable wireless streaming of up to 4 simultaneous audio channels from one USB audio source. System-on-chip (SoC) solutions, together with corresponding USB dongle reference design, let developers design USB dongles for wireless audio applications, without code development or in-depth understanding of USB protocols.

STMicroelectronics    Lexington, MA 02421
Nov 02, 2011 Housed in 3 x 4 x 1 mm package, Model MP34DT01 combines top-port sound-inlet position with SNR of 63 dB and flat frequency response in full audio band of 20-20,000 Hz. In multiple-microphone applications, device enables active noise and echo cancelling as well as beam-forming, which isolates sound and its location. Applications include speech-recognition systems for voice-controlled software and electronic-assistant applications, as well as sound level meters that require high dynamic range.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 01, 2011 Housed in sealed TO-205AD packages, JAN-qualified 60 V Models 2N6660JANTX/JANTXV offer on-resistance of 1.3 W at 10 V, gate-source threshold voltage of 1.7 V, and switching speeds of 8 nsec, while 90 V Models 2N6661JANTX/JANTXV provide 3.6 W on-resistance at 10 V, gate-source threshold voltage of 1.6 V, and 6 nsec switching speed. Both feature input capacitance of 35 pF and are suited for military, space, and avionics applications.

Network Technologies, Inc. (NTI)    Aurora, OH 44202
Nov 01, 2011 Supporting HDTV resolutions to 1080p and computer resolutions to 1,920 x 1,200, VOPEX® DVI Video Splitters split DVI video to up to 16 single link digital DVI displays from single digital video source with no signal loss. Units are compliant with DVI 1.0 and HDCP standards, and are able to handle HDMI or DVI signals. Available with optional stereo audio, splitters will pass HDMI audio and video signals through DVI-I port. Multiple units can be cascaded for more numerous display configurations.

Broadcom Corp.    San Jose, CA 95110
Nov 01, 2011 Combining baseband modem and network processor in one chip, Model BCM85620 delivers functionality of 10 application-specific standard parts. Device provides 1.25 Gbps throughput along with radio-optimized traffic delivery needed for network synchronization, enabling wireless backhaul systems to support requirements of 4G/LTE networks. In addition to packet fragmentation and header compression, SoC includes adaptive code and modulation technology, which automatically provisions bandwidth.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Nov 01, 2011 Accommodating wide range of inductance values, Series 6000A and 6000B are suited for energy storage, input or output filtering, and DC/DC converter applications. Series 6000A, comprising 11 models, offers inductance values from 5.8-57.8 µH, max current values from 4.9-14.5 A, and DC resistance from 5-36 mW. Available in 8 models, Series 6000B offers inductance from 47-680 µH with 3.0-10.5 A max current, and DC resistance from 13-135 mW.

Oberon, Inc    State College, PA 16801
Nov 01, 2011 Used to secure Aruba Networks AP-135 Series Wireless Access Points, Model 1066 Suspended Ceiling Enclosure meets NEC300-22 and 300-23 for plenum installations. This 2 ft x 2 ft x 2.25 in., 6 lb enclosure, approved by OSHPD, attaches directly to building's ceiling structural system and features locking mechanism to facilitate compliance with government and PCI requirements. Access point can be reached from below for moves, additions, and changes.

Touchstone Semiconductor    Milpitas, CA 95035
Nov 01, 2011 Consuming 27 µA at no-load, +2.5 V Models TSM6025A and TSM6025B exhibit initial output voltage accuracy of less than 0.2% and output voltage temperature coefficient of 15 ppm/°C. Output stage is stable for all capacitive loads to 2,200 pF and is capable of sinking and sourcing load currents up to 500 µA. Supply current is not affected by changes in applied supply voltage. Available in 3-pin SOT23 package, ICs are pin-compatible and spec-identical to Maxim Integrated Products' MAX6025A/B.

SMP Sintermetalle Prometheus GmbH & Co KG    Graben-Neudorf   Germany
Oct 31, 2011 Available for frequencies up to 200 kHz and currents up to 1,000 A, SMP Chokes are installed at inverter's input, where they provide power recovery, and at inverter's output, where they act as filter chokes. Encapsulated design ensures that components emit only low-intensity stray fields, which allows other components to be placed in close proximity without magnetic interaction. Offered in sizes from 36-300 mm diameter, RoHS-compliant chokes operate up to 180°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Oct 31, 2011 Utilizing AllnGaP technology, VLMx233.. series are offered in super red, red, amber, soft orange, and yellow and deliver 280-1,400 mcd depending on color. High-intensity LEDs, supplied in 2.3 x 1.3 x 1.4 mm package, provide low thermal resistance junction/ambient of 480 K/W and power dissipation up to 130 mW, which enables drive currents up to 50 mA. Products also provide ±60° angle of half-intensity and luminous intensity ratio per packing unit of less than 1.6.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Oct 28, 2011 Operating from 3.0-5.5 V supply voltage, Model AS1123 is optimized for LED panels where only single LED is connected per output. Constant-current, 16-channel device features integrated diagnostics for over-temperature, open-LED, and shorted-LED conditions. Low-current diagnostic mode eliminates display flicker during global fault testing. Adjustable up to 40 mA/channel using external resistor, output current features ±3% accuracy between LEDs and between ICs.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Oct 28, 2011 Supplied in 0.65 x 0.5 x 0.3 mm package, DLP0QSN series targets cellular smart phones and tablet PCs that employ internal MIPI serial data interface in additional to traditional high-speed differential transmission standards such as USB 2.0, MHL, and HDMI. Noise suppression filters are used as EMC solution for interconnecting high-speed data lines of modules, such as camera, high-speed front end, and display interface.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Oct 28, 2011 Supplied in 12 x 12 mm, automotive-qualified, 169-ball nFBGA package, TPS658629-Q1 provides all power supply functions and reduces board space for infotainment, navigation, and LCD/TFT cluster applications. Components include 3 DC/DC buck converters, 11 LDOs, 4 programmable PWM outputs, 2 RGB LED drivers, and one WLED driver. I²C interface enables control of subsystem parameters, and internal registers have complete set of status information.

Altera Corporation    San Jose, CA 95134
Oct 28, 2011 Supplied on Cyclone® IV FPGA, full-HD 1080p/30 fps video analytics solution combines 60 MP/sec throughput with optimized pixel precision detail. Eutecus Multi-Core Video Analytics Engine IP performs analytics functions, and single-chip solution, capable of delivering processing power required for real-time video processing, can be integrated into HD Internet protocol cameras. Performance lets user define rules, configure alerts, and remotely update rules for events they want detected.

Crystek Corp.    Fort Myers, FL 33907
Oct 27, 2011 Operating from 1,200-2,100 MHz with control voltage range of 0.5-25 V, CVCO55CW-1200-2100 features typ phase noise of -95 dBc/Hz @ 10 kHz offset and has typ output power of +6 dBm. U.S. manufactured product comes in 0.5 x 0.5 in. SMD package, accepts 12 V input, and has max current consumption rating of 35 mA. Pulling and Pushing are minimized to 25.0 MHz and 10.0 MHz/V, respectively, and second harmonic suppression is -8 dBc typ.

Analog Devices Inc    Norwood, MA 02062
Oct 27, 2011 Integrating low-phase-noise, frequency-agile VCO and loop filter along with dynamic adaptive clock support, dual-input Model AD9557 and quad-input Model AD9558 translate any standard input frequency to any standard output frequency from 2 kHz to 1.25 GHz with sub-400 fs RMS total jitter on 12 kHz to 20 MHz. Adaptive clocking allows DPLL divider ratios to be changed while DPLL is locked. Fully programmable, ICs enable line card designers to use same component in many board designs.