Pacific Aerospace & Electronic    Wenatchee, WA 98801
Nov 10, 2011 Designed for hermetic applications, Mini Micro-D Connector can be configured with 9, 15, 21, 25, 31, and 37 pin counts. Beryllium-copper pins support 600 Vac and 3 A per pin, and each pin is hermetically sealed with Kryoflex polycrystalline ceramic. Laser welded into aluminum, titanium, or kovar housings, connectors provide greater than 5,000 MW insulation resistance at 500 Vdc, are MIL-PRF-83513/7 interface-compliant, and mate with connectors manufactured to MIL-PRF-83513/8.

Aerovox Corp.    New Bedford, MA 02745
Nov 10, 2011 Available in over 40 standard configurations, with ratings from 240-600 Vac, AeroPower(TM) Euro-Style PFC Capacitors feature vacuum-impregnated metalized polypropylene, round aluminum case with M12 mounting studs and 3-contact metric terminal block. Units are built to UL 810 and IEC 60831 standards and are UL Recognized CYTW2 and cUL Recognized CYTW8 certified. For safety, capacitors include pressure interrupter, self-healing technology, and external discharge resistors.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Nov 09, 2011 With on-chip capacitive sensor, Model AS3911 requires 5 µA of current and can wake in presence of tag. Automatic antenna tuning provides 1 W of output power, eliminating need for external booster circuit. IC includes analog front end and integrated data framing system for handling ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443 A and B reader, and FeliCa(TM) reader. Housed in 5 x 5 mm QFN package, Model AS3911 operates from 2.4-5.5 V over -40 to 85°C temperature range.

Phoenix Contact    Harrisburg, PA 17111 0100
Nov 09, 2011 Able to accept solid, stranded, or ferruled wires from 26-12 AWG, UT 2.5-3L series features push-in bridging on each level that conserves space while distributing power. Vertical bridges electrically connect all 3 levels to one another, and Reakdyne screw-clamp design prevents screws from backing out. Each terminal point has labeling space for identification, and components are manufactured from corrosion-resistant copper alloy. Current ratings are 300 V at 20 A and 600 V at 5 A.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 08, 2011 Housed in LLP2510 package measuring 2.5 x 1.0 x 0.55 mm, Model VBUS54ED-FBL features low maximum leakage current of less than 0.1 µA at working voltage of 5.5 V. Four-line array offers breakdown voltage of 7.9 V at 1 mA and max clamping voltage of 12.5 at 2 A. Compliant with RoHS 2002/95/EC and WEEE 2002/96/EC, Pb-free device provides transient protection for data lines as per IEC 61000 4 2 (ESD) at 15 kV and is suitable for USB 3.0, HDMI, DisplayPort, eSATA, and 1394/Firewire applications.

Herrmann Ultrasonics, Inc.    Bartlett, IL 60103
Nov 08, 2011 Targeting automation integrators, Digital Ultrasonic Generator amplifies incoming electrical voltage to high frequency signal, which is passed to converter to create frictional heat during ultrasonic welding of thermoplastic material. External voltage fluctuations and temperature changes do not affect output, resulting in stable welding process. Internal signal generating adjustments are accomplished with software, while integrated heat sink interface enables optimal cooling.

Xilinx, Inc.    San Jose, CA 95124 3400
Nov 08, 2011 Providing users with access to 2 million logic cells, which is equivalent to 20 million ASIC gates, Virtex®-7 2000T enables system integration, ASIC replacement, and ASIC prototyping and emulation. Device uses 2.5-D IC Stacked Silicon Interconnect technology, which overcomes challenges of yielding defect-free, large monolithic die by building large capacity programmable logic device from 4 separate FPGA die, interconnected upon passive silicon interposer.

Supertex Inc.    Sunnyvale, CA 94619
Nov 08, 2011 Employing average current mode control, Model HV9861A does not produce peak-to-average error, optimizing accuracy and line/load regulation of LED current. Unit requires no loop compensation or high-side current sensing. With internally regulated voltage of 7.5 V, it is suited for variety of solid-state lighting applications, including TV and monitor backlighting, signage, decorative, and general lighting. HV9861A is available in SOIC-8 and SOIC-16 packages.

Microsemi Corp.    Scottsdale, AZ 85251
Nov 08, 2011 Providing single-step conversion from 347 or 480 Vac down to less than 57 Vdc, Model LXMG221D-0700040-D2F(TM) eliminates step-down transformers. Device supports constant current single 700 mA string applications using ~12-17 LEDs without flickering, and includes fault detection and management capabilities. With power factor greater than 0.9 and THD of less than 15% across input voltage range at full load, 40 W driver is dimmable to 10% via 0-10 V, PWM control or potentiometers.

National Instruments Corp.    Austin, TX 78759-3504
Nov 07, 2011 Designed for automated test systems with large numbers of channels, NI SwitchBlock relay cards provide option for switch configuration, routing, programming, and maintenance in variety of test applications. Products include multiple 2-wire switches for differential measurements and 16-row switches that provide multiple simultaneous connections. NI SwitchBlock comprises expandable carrier that accommodates up to 6 relay cards while occupying 4 slots in PXI chassis.

Atmel Corporation    San Jose, CA 95131
Nov 07, 2011 Based on Cortex(TM)-M4 processor, Model SAM4S16 operates at max speed of 120 MHz with 128 KB SRAM. Device provides full peripheral set, including full-speed USB, high-speed SDIO/SD/MMC, UARTs, TWIs, SPI, I2S, and 12-bit ADC/DAC. External bus interface supports PSRAM, LCD modules, NOR Flash, and NAND Flash. With Atmel QTouch® technology, microcontroller enables touch button, slider, and wheel functionality targeting industrial markets.

DDP Supply    El Segundo, CA 90245
Nov 04, 2011 Available in several colors, DDP 895L-X-M3 Series can replace 895 style incandescent bulbs used as door status indicators in rail cars. Solid-state LED lamp, providing 180° visibility, delivers upwards of 90 lm and operates at 37.5 Vdc. Drawing 45 mA, product has internal voltage regulator that allows even illumination despite voltage fluctuations from 20-45 Vdc. Additional internal circuitry protects against effects of transient voltage spikes and circuit noise.

Opto Diode Corp.    Newbury Park, CA 91320
Nov 04, 2011 Featuring 100 mm² active area, IRD SXUV 100 Series has nitrided metal silicide front window that permits operation without loss of performance in high humidity and other environmental conditions that normally require sealed packages. Diodes with single active areas are available from 1-576 mm², and quadrant diodes with several central openings may also be specified. When tested, devices revealed no observable responsivity loss after exposure to billions of 157 and 193 nm pulses.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 04, 2011 With life expectancy of up to 2 million cycles, Model P13L features heavy-duty construction for reliable operation in extreme environmental conditions. Stability and independent linearity of ±5% are ensured for full life of device, which is optimized for use as voltage divider operator interface. Available in 6 bushing options and body sizes of 12.6, 14, and 16 mm, potentiometer is offered in 3, 4, and 6 mm shaft diameters and multiple shaft lengths.

Atmel Corporation    San Jose, CA 95131
Nov 04, 2011 Suited for home automation, metering, and industrial applications, AVR® XMEGA® MCUs integrate all features required to run segment in LCD. Integrated LCD controller supports up to 4 x 40 and 4 x 25 segments on 100-pin and 64-pin devices, respectively. picoPower® technology minimizes power consumption, while SWAP mode enables internal re-routing of LCD signals. For designs that do not require all LCD segments, up to 16 segment pins can be used as general-purpose I/O pins.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Nov 04, 2011 Aimed at 2.4 GHz applications, Model LFB182G45BG2D280 is designed specifically for use with CC253x and CC254x wireless connectivity system-on-chips from Texas Instruments Incorporated for ZigBee and Bluetooth technology networking, respectively. Measuring 1.6 x 0.8 mm, device incorporates all necessary RF circuitry of matching network, balun, and filter within single package.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Nov 04, 2011 Supplied in 3 x 3 mm VQFN package, bq25504 manages microwatts to milliwatts of power generated from solar, thermoelectric, electromagnetic, and vibration sources and stores extracted energy in elements such as Li-ion batteries and super capacitors. Included circuitry helps protect energy storage element from over and under voltage conditions as well as kick-start system when battery is deeply discharged. While typ quiescent current is 330 nA, conversion efficiency is greater than 80%.

Oberon, Inc    State College, PA 16801
Nov 03, 2011 Intended for installation in air-handling space, 2 ft x 2 ft x 2.6 in. Model 1059-MIMO is designed for mounting Extreme Networks' Altitude 4620 dual radio 802.11n access point with connectors. Secure, plenum-rated, suspended ceiling-mounted enclosure promotes optimal radio frequency coverage. Mounting features on door allow attachment of 2 dual band MIMO antennas, and locking doors provide physical security to help meet guidelines in government and retail environments.

Klus LLC    Vero Beach, FL 32960
Nov 03, 2011 By acting as connector between light source and application area, LED extrusion maximizes uses available for LED light strips (LED profiles or LED aluminum channels). Waterproof extrusions, available diverse shapes and sizes, eliminate obstacles related to LED light strip mounting by standardizing mounting techniques of LED ribbon light. They can be custom designed to suit specific commercial and residential applications.

Motolight    Cincinnati, OH 45215
Nov 03, 2011 Available in various finishes, motorcycle LED lights include standard output version that produces 100 lm, 6623K color, and 10° beam spread and high-output model that produces 200 lm, 6588K color, and 25° beam spread. Standard bulb is available with clear or amber lens and will mount on virtually any motorcycle or Spyder as well as ATVs and UTVs. Lights are available as replacement bulbs for Motolight housings or when ordering motorcycle riding lights.