Electronic Components & Devices

Electronic Components & Devices

Device Controller IP comply with DSI v1.2 and CSI-2 v1.2 specs.

July 25, 2016

Respectively supporting up to 8 and 4 lanes of operation, DesignWare® MIPI® CSI-2SM Device Controller IP and DesignWare MIPI DSISM Device Controller IP let designers implement required camera and display functionality in mobile, automotive, and IoT applications. Both device controllers, interoperable with DesignWare... Read More

Electronic Components & Devices

New Yorker Electronics Supplying Vishay's TNPV e3 Series Thin Film Flat Chip Resistors

July 25, 2016

Industry-First High-Voltage Resistors Enable Precise Voltage Measurement; Excellent Stability in Different Environments in 1206 and 1210 Cases NORTHVALE, NEW JERSEY – Vishay Draloric’s Industry-First Thin Film Flat Chip Resistors, the TNPV e3 Series, are now available through New Yorker Electronics. The industry's first such devices with operating voltages to 1000V, TNPV thin film chip... Read More

Electronic Components & Devices

Waveguide Bends operate up to 90 GHz across 12 frequency bands.

July 22, 2016

Operating across C to W bands, waveguide bends do not degrade transmission signal in waveguide systems where signal is required to turn or bend 90°. E- and H-plane configurations are available constructed of gold-plated, oxygen-free hard copper, or painted copper alloy (depending on the model). Along with VSWR as low as 1.08:1, these 30 unique models come in sizes from WR-137 (5.85 GHz) to... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Isolated Gate Driver supports high-voltage applications.

July 20, 2016

Providing reinforced isolation of 5.7 kVrms, surge immunity up to 12.8 kV, and common-mode transient immunity >100 V/ns, Model UCC21520 is suitable for low-side, high-side, high-side/low-side, or half-bridge power management designs. Dual-channel device delivers propagation delay of 19 ns and channel-to-channel delay matching of <5 ns. Operating with 3–18 V input, driver features 4 A/6 A... Read More

Electronic Components & Devices

First Remote Live Demo at EMC 2016

July 19, 2016

Consider the Possibilities Empower RF Systems is conducting remote live demonstrations of our broadband, high power amplifier at the IEEE EMC Symposium at the Shaw Centre in Ottawa July 26 – 28th , 2016, Booth 322. The amplifier will be housed in Los Angeles while viewed in the Ottawa exhibit venue with live streaming video while controlling the amplifier from the exhibit floor through a... Read More

Electronic Components & Devices

Compact Non-Magnetic Thin Film Chip Resistors are rated up to 6 W.

July 19, 2016

Built on aluminum nitride substrates and supplied in 1206 and 2512 case sizes, surface mount PCNM series delivers power ratings from 2–6 W for telecommunications, medical, and military applications. Backside terminations minimize thermal resistance to promote power handling capability. Along with TCR down to ± 25 ppm/°C and laser-trimmed tolerances to ±0.1% over -55 to... Read More

Communication Systems & Equipment, Electronic Components & Devices

Mountain RF Sensors, Inc., a Boutique Electronics Design and Manufacturing Company, Announces Launch by Offering a Variety of Custom Radio Frequency (RF) Products for Government and Military Customers

July 19, 2016

Mountain RF Sensors wants to know, what have you been missing? Many RF products claim to have great sensitivity but that often comes at the price of masking weak signals when strong signals are also present.  How many weak intercepts have you not identified and critical intelligence not obtained?  Our line of RF products and software at a budget conscious price, paired with world class... Read More

Electronic Components & Devices

Integrated Circuits support Bluetooth® Low Energy v4.1.

July 18, 2016

Based on ARM® Cortex®-M0 processor, Models TC35678FSG, TC35678FXG, and TC35679FSG support Bluetooth® LE v4.1 communications for Bluetooth Smart devices, including wearable electronics, sensors, and high-end coin battery-powered devices. TC35679FSG is a mask-ROM-based product with no built-in Flash ROM, while TC35678FXG and TC35678FSG incorporate built-in 256 KB Flash ROM to store user... Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Electronic Components & Devices, Vision Systems

LED Shoebox Area Lights come in low- and high-voltage versions.

July 18, 2016

Available in low (12–24 Vdc) and high (277–480 Vac) input options, ETL-Listed SBX series feature IESNA Type V circular lighting pattern and can serve as replacements for HID lighting in outdoor applications. Low-profile, 24–300 W luminaires, available in 3000K, 4000K, and 5000K CCTs, produce 2,274–29,000 lm and can also replace Metal Halide/HPS fixtures of 100–1,000 W. Multiple... Read More

Electronic Components & Devices

FMC Carrier PCIe Cards host high-performance FPGAs.

July 18, 2016

PCI516, PCI592, and PCI595 bring COTS PCIe systems up to date with current FPGAs or integrating high-end FMCs. All cards provide direct connections to neighboring cards, which avoids need to stage data through host processor, optimizes throughput, and minimizes latency. Active cooling is provided for both FPGA and FMC, and FPGAs on these cards are supported by 64-bit wide memory banks.... Read More

Electronic Components & Devices

RF Power Amplifier covers 1,700-2,400 MHz frequency range.

July 18, 2016

With module efficiencies of 35–55%, NuPower™ 12D05A provides saturated RF power of 35 Watts in L-band and 20 Watts in S-band. Amplifier offers 44 dB of RF gain with nominal input drive level of 0 dBm. Aluminum chassis, measuring 4.50 x 3.50 x 0.61 in., provides heat dissipation and is small enough for integration into air- or ground-based tactical, test, or training platforms. Device can be... Read More

Electronic Components & Devices

Aluminum Capacitors offer up to 50 g vibration resistance.

July 18, 2016

Providing stability and reliability in automotive and industrial applications, Vishay BCcomponents surface-mount 260 CLA-V, 246 CTI-V, and 250 CRZ-V and radial 246 RTI-V and 250 RMI-V are AEC-Q200-qualified that feature impedance down to 18 mΩ at 100 kHz, ripple current to 3,500 mA, and useful life to 10,000 hr. Depending on model, capacitance ranges from 150–10,000 µF over voltages from... Read More

Computer Hardware & Peripherals, Electronic Components & Devices

CMOS DDR3L SDRAM features 8 Gb density.

July 15, 2016

Housed in 78-ball, 9 x 13.2 mm, lead-free FBGA package, Model AS4C1G8MD3L is internally configured as 8 banks of 1G x 8 bits. Double data rate architecture enables fast transfer rates up to 1,600 Mbps/pin and clock rates of 800 MHz. Operating from single +1.35 V power supply, monolithic device is available with extended commercial temperature range of 0–95°C. Product offers fully synchronous... Read More

Electronic Components & Devices

Waveguide Transitions operate up to 110 GHz across 14 bands.

July 14, 2016

Operating from 5.85–110 GHz across 14 frequency bands, Waveguide to Waveguide Transitions are used in high power wireless applications such as instrumentation, test benches, SATCOM, MILCOM, radar, and telecom where signal strength and integrity are critical. Units provide smooth transition between different waveguide sizes with VSWR as low as 1.08:1. Constructed of gold plated or painted brass,... Read More

Electronic Components & Devices

GaN Power Amplifiers offer high gain at up to 7.5 GHz.

July 14, 2016

Featuring high gain levels of 43–60 dB across broad frequency bands from 30 MHz to 7.5 GHz, Solid State GaN RF Amplifiers are suited for commercial and military radar, jamming systems, medical imaging, communications, and electronic warfare. Saturated output power levels range from 10–100 W with up to 35% Power Added Efficiency. All have single voltage supplies which are internally regulated.... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Cable Plugs deliver application flexibility.

July 14, 2016

Building on flexibility of PSMP board-to-board designs, 4 PSMP cable connectors are available that are designed for 0.141 and 0.86 in. dia, semi-rigid and conformable cables. Design suits high-power applications up to 200 W at frequencies of 2.2 GHz. Mating style is similar to SMP interface, while gold-plated female center contacts and beryllium copper outer contacts plated in white... Read More

Electronic Components & Devices

Test Pattern Generator cuts ATPG runtime from days to hours.

July 14, 2016

Built on test generation, fault simulation, and diagnosis engines that are extremely fast, TetraMAX® II ensures patterns are ready when early silicon samples are first available for testing. Pattern reduction enables designers to shorten time of testing, while memory efficiency enables utilization of all server cores regardless of design size. Reuse of design modeling and rule checking... Read More

Communication Systems & Equipment, Electronic Components & Devices

Radiation Tolerant 36 V In-Amps integrate differential ADC driver.

July 13, 2016

Wafer-by-wafer guaranteed to 75 krad (Si) with low dose rate exposure of 10 mrad/sec, ISL70617SEH differential input, rail-to-rail output instrumentation amplifier (in-amp) serves communication satellite applications. Silicon on insulator process provides SEL and SEB robustness of 60 MeV in heavy ion environments, while <10 µsec SET performance eliminates need for extra filtering.... Read More

Electronic Components & Devices, Test & Measuring Instruments

D/A Converter optimizes television viewing experience.

July 13, 2016

Featuring 2.5 GHz bandwidth, 16-bit, 12 GSPS Model AD9162 exceeds 1.794 GHz optional future requirement specified by cable industry’s DOCSIS 3.1 standard. Dynamic range of -82 dBc SFDR at -167 dBm/Hz NSD allows designers to synthesize signals across wide frequency spectrum from direct-to-RF up to 6 GHz. Converter supports all wireless communications infrastructure protocols (WCDMA, LTE, LTE-A,... Read More

Electronic Components & Devices, Materials & Material Processing

BiSy 2-Line, ESD Protection Diode conserves space in portables.

July 13, 2016

Featuring flow through design, VBUS05M2-HT1 offers low load capacitance (0.35 pF typ) and leakage current (< 0.1 µA max @ 5.5 V) for protection of high-speed data lines in smartphones, tablets, notebooks, and wearable devices against transient voltage signals. Other characteristics include 8.5 V typ breakdown voltage at 1 mA and 18 V max clamping voltage at 3.6 A. Supplied in... Read More