Maxim Integrated Products    Sunnyvale, CA 94086
Feb 08, 2012 Available in 16-pin QSOP, Models MAX16919/MAX16969 feature iPod®/iPhone® fast-charge detection, which supports Hi-Speed USB at 480 Mbps and full-speed USB at 12 Mbps, enabling users to recharge USB devices while driving. Units also provide integrated host-charger detection circuitry and adjustable current capability of 3 A. With short-to-battery and short-to-ground protections, ICs are suited for automotive radio, navigation, connectivity, and USB hub applications.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 08, 2012 Combining resistance values from 100-750 µW with 3 W power capability in 3124 size package, Power Metal Strip® WSMS3124 is designed for industrial and consumer single- or multiphase energy meters. It features 5-terminal connection design, all-welded construction, and offers very low inductance values of less than 0.5 nH and low thermal EMF of less than 3 µV/°C. Device is lead-free and RoHS-compliant. Physical shape results in very low TC down to 75 ppm/°C.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Feb 08, 2012 Supplied in 5 mm, 20-Lead PQFN package, MAAP-008924 three-stage, 1.2 W GaAs power amplifier (PA) is fully matched to 50 ohms on input and output and provides high output IP3 (44 dBm) while maintaining low DC power consumption. Product, fabricated with MESFET Process, operates in 10-13.3 GHz frequency range and can be used as PA stage or driver stage. Quiescent current rating is 1,000 mA, and other specifications include 12 dB input return loss, 10 dB output return loss, and 20 dB gain.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Feb 08, 2012 Offered in 6-pin SOT-23 package and 6-pin LLP package with exposed pad, LM5114 drives Gallium-Nitride (GaN) power field-effect transistors (FET) and MOSFETs. Independent source and sink outputs from 5 V supply for optimal rise and fall times promote efficiency, while +4 to +12.6 V single power supply range supports range of applications. Other features include 0.23 ohm open-drain, pull-down, sink output; 7.6/1.3 A peak sink/source driver current; and 12 nsec typ propagation delay.

Leviton Commercial Networks Division    Bothell, WA 98021
Feb 08, 2012 Supporting video applications over distances up to 100 ft, Enhanced Multimedia Outlet System Modules include 3 types: VGA, RCA composite video and stereo audio, and RCA component video. Modules provide point-to-point connections over twisted pair cable, for connection of everything from PC monitors to DVD players. Modules offer industry-standard 110-punchdown termination and give installers ability to cut cable lengths in field.

Calex Mfg. Co., Inc.    Concord, CA 94520
Feb 07, 2012 Powered by 115 Vac, 230 Vac, or 11-30 Vdc, Model 4800 has built-in excitation supply capable of delivering up to 120 mA at 10 V, more than enough to drive four 350 W load cells. Input is isolated from output and both are isolated from supply voltage, eliminating unwanted ground loop problems. Measuring 9.0 x 7.25 x 2.2 in., transmitter offers output options of 0-20 mA or 0-10 V and 4-20 mA or 2-10 V. Overall accuracy over room temperature is less than ±0.1% of FS.

Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Feb 07, 2012 Available in 14 sizes/styles with precision-machined brass housing, OFP® Solder Barrier Receptacles are discrete sockets for through-hole soldering into printed circuit boards. Organic fibre plugs prevent solder, paste, or flux from contaminating internal contact during placing and soldering process. When device/mating lead is plugged into receptacle, OFP® is knocked out, allowing mating lead to pass through fingers of internal contact and make reliable electrical connection.

Specialized Products Company    Southlake, TX 76092
Feb 07, 2012 Available in Cat5, Cat5e, and Cat6 versions, TrueConect RJ-Type Modular Plug Connectors feature factory-polished contacts with 50 µm gold plating, making them suited for high-speed data transmissions. Units have 3 offset insulation displacement points, as well as primary and secondary strain relief design that doubles cable holding strength of terminated connector. Housed in thermoplastic, plugs allow for visual verification of wiring configurations.

STMicroelectronics    Lexington, MA 02421
Feb 07, 2012 Supplied in 3 x 3 mm package, STOD13AS is produced using Silicon On Insulator process technology and integrates step-up and inverting DC/DC converters needed to generate positive and negative supplies on same chip. Immunity to cellphone communication noise produces consistent, flicker-free display, while Enable pin and pulse-skipping operation promote power conservation. Along with 85% typ efficiency, chip features 250 mA output current capability and 1.5 MHz operating frequency.

CW Industries    Southampton, PA 18966
Feb 07, 2012 Rated at 5 A/contact, CCM-20, 21, 22, and 23 Series design allows optimized solder flow and for post solder visual inspection. Pin counts of 38, 50, 88, 108, and 132 are available with standard pin length of .250 ±0.025. Made of glass-filled polyester with beryllium copper alloy contacts that are gold-plated in mating area, high density connectors are suited for advanced missile systems, torpedoes, flight guidance systems, and other military electronics equipment.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 07, 2012 Manufactured with advanced plating technique that puts precious metals only where needed, KOAXXA RF Interconnects have selective tin plating in solder region to promote soldering, and selective gold in contact region that helps meet industry standards. SMA units include panel mount; PCB straight and right-angle board mounts; and cable plugs and jackets with variety of flexible, semi-rigid, and conformable cable types.

VTI Instruments Corporation    Irvine, CA 92614
Feb 06, 2012 Suited for acoustics, modal, order analysis, and machine condition monitoring, SentinelEX Analyzers feature data rates of 625 ksamples/sec/channel and true differential inputs with common mode performance of -120 dB, minimizing unwanted noise. Access to corporate wide cloud data management delivers advanced test data availability, security, and storage services throughout organization. MATLAB® and Simulink® provide access to standard filters and algorithms such as real-time distributed analysis.

Everlight Electronics Co. Ltd.    TAIPEI   Taiwan
Feb 06, 2012 Intended for light bar replacement and omnidirectional bulb applications, Low/Mid Power LEDs consists of 0.06, 0.2, 0.4, and 0.5 W products with efficiencies of greater than 100 lm/W. Package sizes, depending on wattage rating, include 3020, 3528, 5050, and 5630. While 3020 and 3528 packages suit light bar applications, 5630 package is optimized for A-bulb applications. LEDs offer range of CRI values and follow ANSI binning.

Phoenix Contact    Harrisburg, PA 17111 0100
Feb 03, 2012 Accommodating cable sizes up to 2 AWG with currents to 115 A, IPC 35 Series offers PCB-to-PCB and wire-to-wire connections. Plug connectors and headers are available in 4-pin version with EMC-grade shield connection. Conductor connection is made by tightening tension sleeve with screwdriver. Two- to six-pin plug connectors are equipped with screw flanges that latch to header. With centerline spacing of 15 mm, connectors feature unrestricted 600 V UL rating in compliance with UL1059.

Omega Engineering, Inc.    Stamford, CT 06907
Feb 02, 2012 SCE-ELSSLPPL series of NEMA 4X electrical enclosures is designed to house electrical and electronic controls, instruments, and equipment in areas which may be regularly hosed down or are in very wet conditions. Each 304 stainless steel electrical cabinet provides protection from dust, dirt, oil, and strong jets of water for weatherproof applications. Suitable areas of use include food and chemical industries.

Allegro MicroSystems Inc.    Worcester, MA 01615
Feb 02, 2012 Supplied in 24-pin surface-mount SOIC with 2 pairs of batwing leads, Model A4970 utilizes DMOS output technology that drives windings of bipolar stepper motor or bidirectionally controls 2 DC motors. Both bridges can sustain 45 V and include internal PWM control of output current to 750 mA. For PWM current control, max output current is determined by user selection of reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0, 33, 67, or 100% of max level.

Stackpole Electronics Inc.    Raleigh, NC 27604
Feb 01, 2012 Comprised of 1210 size thick film SMD current sensing chip resistors, CSR1210 Series has 0.5 W power rating and can achieve 0.01-1 W resistance in tolerances as low as 1%. Suitable applications include those where resistance values are above 10 mW and TCR requirements are 200 ppm or higher. These include power management for power supplies, small motor controls, DC/DC converters, battery management, instrumentation amplifiers, voltage regulation modules, and industrial controls.

STMicroelectronics    Lexington, MA 02421
Feb 01, 2012 Removing need for mechanical relays in car-window control, Model L99DZ80 embeds SPI-programmable slew-rate control IP that can drive 4 external MOSFETs in half-bridge configuration dedicated to PWM-driven electric-window applications. Multi-functional door-zone driver features 6 bridges for double door-lock control, mirror fold, and mirror-axis control, as well as high-side driver for mirror defroster, and control block with external MOS transistor for charging/discharging dimmable mirror glasses.

Lumex Inc.    Palatine, IL 60067
Feb 01, 2012 Eliminating need for AC-to-DC power conversion, QuasarBrite 120 Vac LED comes in round configuration with 7 mm diameter, and can be customized with wire lengths from 6 in. to 6 ft. RoHS-compliant unit is available in blue, white, red, yellow, and green. Typical applications include green energy technology such as monitors on solar panels; industrial control, such as flow meters; commercial appliances; and communications equipment, including network routers and video servers.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Feb 01, 2012 Able to reduce PCB area while improving reliability, 600 mA LM5017 step-down switching regulator simplifies DC/DC conversion and accelerates design process. Product enables direct POL voltage regulation from input voltages as high as 100 V, eliminating need for external transient voltage suppressors or clamps. Also, integrated MOSFETs eliminate freewheeling Schottky diodes while promoting efficiency. COT control architecture and operation at switching frequencies to 1 MHz are also standard.