Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 02, 2012 Available in cool white, neutral white, and warm white, 1 W Little Star® VLMW712xxx Series offers luminous intensity of 33,500, 29,400, and 25,000 mcd, respectively, with thermal resistance of 10 K/W. Devices feature 60° half-intensity angle and 120° viewing angle. Housed in 6.0 x 6.0 x 1.5 mm SMD package, RoHS-compliant LEDs are designed for high current drive up to 350 mA and are suitable for traffic lights, architectural lighting, video/advertising lighting, and backlighting for appliances.

Allegro MicroSystems Inc.    Worcester, MA 01615
Mar 01, 2012 For bidirectional PWM current control of inductive loads, A4973 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. IC has internal fixed off-time PWM current-control circuitry that can be used to regulate max load current to desired value. Device comes in choice of 16-pin dual-in-line plastic package with copper heat-sink tabs or 16-pin plastic SOIC with copper heat sink tabs, and are targeted at office automation and industrial markets.

Summit Microelectronics, Inc.    Sunnyvale, CA 94085
Mar 01, 2012 Dual-/single-output integrated DC-DC buck regulators SMB206A and SMB210A have serial digital interface and on-board non-volatile memory that enables configuration during development and re-programming in system by host software. ICs can also be programmed by fixed resistors and are available as standard products with fixed voltages. Respectively, SMB206A and SMB210A supply up dual 3 A + 3 A or single 6 A output currents. Switching frequency is programmable.

Renco Electronics, Inc.    Rockledge, FL 32955
Mar 01, 2012 Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130°C.

Fujitsu Semiconductor Europe GmbH    Langen D-63225  Germany
Mar 01, 2012 Built using SAW-less architecture, which eliminates need for external LNAs, Model MB86L11A supports all modes, including LTE, HSPA+, WCDMA, GSM, EDGE, EDGE-EVO, CDMA, and TD-SCDMA. Envelope tracking technology minimizes radio system power consumption, while antenna tuning optimizes total radiated power output from antenna. Both extend battery life of mobile devices. Providing flexible port mapping, advanced programming interface adds customized KPI features.

Touchstone Semiconductor    Milpitas, CA 95035
Mar 01, 2012 Housed in 2 x 2 mm TDFN-8 package, Model TS3002 is fully specified to operate at 1 V while consuming 1 µA supply current at output frequency of 25 kHz. Single-supply CMOS oscillator/timer requires just 1 resistor and 1 capacitor to set output frequency. Operating from -40 to +85°C with FOUT Period Drift of 0.044%/°C, device is suited for portable and battery-powered equipment.

Pentek Inc.    Upper Saddle River, NJ 07458
Mar 01, 2012 Supporting Pentek Virtex-6 Cobalt® and Pentek Virtex-7 Onyx(TM) modules at clock rates up to 1.8 GHz and sample rates to 3.6 GHz, Model 7192 PMC/XMC module and 19 in. rackmount Model 9192 enable synchronous sampling and timing for multichannel data acquisition, DSP, and software radio applications. Model 7192 can synchronize up to 4 modules, each receiving common clock with timing signals for synchronizing, triggering, and gating functions, while Model 9192 supports up to 12 modules.

ON Semiconductor, LLC    Phoenix, AZ 85008
Feb 28, 2012 Housed in SOIC-8 package, Models NCV47700 and NCV47701 feature output diagnostic pin CSO that can be used to detect open and shorted loads. By connecting resistor to CSO, devices can provide adjustable output current from 10-350 A with ±10% accuracy. Adjustable output voltage versions are available, covering 5-20 V range, with ±6% accuracy for NCV47700 and ±3% accuracy for NCV47701. ICs also include reverse input voltage protection, as well as overcurrent and overtemperature protection.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 28, 2012 Housed in 3.95 x 3.95 x 0.75 mm surface-mount package with I²C interface, Model VCNL4010 combines IR emitter and photo-pin-diode for proximity, ambient light detector, signal processing IC, and 16-bit ADC. Interrupt function enables sensor to work independently until predefined proximity or ambient light event occurs, and then it wakes up microcontroller, minimizing power consumption. With programmable LED drive current from 10-200 mA, sensor achieves object detection up to 200 mm.

Anadigics, Inc.    Warren, NJ 07059
Feb 28, 2012 Housed in 4.5 x 6 mm package, AWT664x Series Front-End Modules combine HELP3E(TM) power amplifiers with duplexers to optimize RF performance while extending battery life in thin form factor phones. Dual-band modules offer 3 mode states to achieve high power-added efficiencies at low-range and mid-range output power levels for use with or without DC-DC converter. Compliant with WCDMA/HSPA, HSPA+, and LTE, devices have low quiescent current of 4 mA and flat gain response across all bands.

CEVA, Inc.    San Jose, CA 95110-3710
Feb 28, 2012 Based on CEVA-XC4000 DSP framework, software-based, Multi-Mode Reference Architecture leverages power management and system partitioning to enable LTE-A solution requiring 3.4 mm² die area and 100 mW at 28 nm process. Product allows for seamless integration of customer-owned coprocessors and hardware accelerators. It supports carrier aggregation of up to 2 carrier components to total of 40 MHz channel bandwidth with spatial multiplexing of 8 x 4 MIMO, 300 Mbps downlink, and 100 Mbps uplink.

Thomas Research Products    Huntley, IL 60142
Feb 27, 2012 Featuring F-Can sizes, LEG series offer constant-current performance in 75, 100, 120, and 150 W standard models. Dimmable versions are also available. Enclosure offers flexibility for use in existing fixture designs, and series can be used by OEMs in new offerings or retrofitted in field. Input voltage ranges from 120-277 Vac, and Black Magic Thermal Advantage(TM) metallic enclosures are rated to IP66. Over-voltage/-current and short circuit protection with automatic recovery are standard.

Crystek Corp.    Fort Myers, FL 33907
Feb 27, 2012 Operating at 5,200 MHz, Model CVCO33BE-5200-5200 features control voltage range of 0.5~4.5 V and typical phase noise of -84 dBc/Hz at 10 kHz offset. Input voltage is 5 V, with max current consumption of 26 mA. Pulling and pushing are minimized to 6.0 MHz and 3.0 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, oscillator is suited for digital radio equipment, fixed wireless access, satellite communications systems, and base stations.

K-micro    San Jose,, CA 95131
Feb 27, 2012 Fully compliant with IEEE 1901 standard, KHN13200 Chip features 240 Mbit PHY rate and integrates into communications adapters and variety of other network devices such as multimedia equipment and cameras. High Definition Power Line Communication device consumes 0.4 W in operation mode and 0.07 W in standby mode. With ISP support, chip provides future-proof solution for systems that support coexistence scheme.

Saelig Co., Inc.    Pittsford, NY 14534
Feb 24, 2012 Measuring 3.3 x 1.75 in., Xminilab combines 8-bit arbitrary waveform generator, protocol sniffer, and mixed signal oscilloscope that provides simultaneous 2 MSPS sampling of 2 analog signals. Unit is based on Atmel's ATXMEGA32A4 MCU, with 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM. It can be mounted on breadboard or PCB for in-situ testing and verification. Graphic 2.4 in. 128 x 64 pixel OLED display indicates monitored signals with automatic measurements, adjustable persistence, cursors, and grids.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 24, 2012 For IR and visible light sources, TEFD4300 is clear epoxy device with sensitivity range of 350-1,120 nm. For light sources in IR wavelength from 770-1,070 nm, TEFD4300F is black epoxy device with daylight blocking filter matched with 850-950 nm IR emitters. Both silicon PIN photodiodes offer 17 µA reverse photo current and ±20° angle of half sensitivity. Other features include switching times down to 10 ns, 0.1%/K temperature coefficient of light current, and -40 to +100°C operating range.

Larson Electronics, LLC    Kemp, TX 75143
Feb 24, 2012 With Model MGS-150KVA-480-10X100A, operators can tap into 480 V 3-phase power sources and step current down to 120/208Y output for powering variety of tools and equipment. Unit distributes 120 Vac single-phase through 4 GFI-protected receptacles and 208Y via ten 100 A ADR1044 outlets. Safe connection to 480 Vac is provided through 400 A fused ON/OFF main disconnect switch. Featuring 2 in. square steel cage, transformer has centrally located lifting eyelet and integral skid pockets for transport.

GlacialPower    New Taipei City   Taiwan
Feb 24, 2012 GP-LS200P series regulates voltage and power consumption with 87-90% efficiency and transforms AC voltage from 90-295 V into useable DC voltage. Comprised of 4 models, series offers DC voltage output from 12-48 V and maintains optimal temperatures with cooling via free air convection. PFC of power driver maintains clean and pure sine waveform of current to improve electric power quality, promoting LED life and reducing power loss from electric power pollution.

Anadigics, Inc.    Warren, NJ 07059
Feb 24, 2012 Utilizing InGaP-Plus(TM) technology and HELP3E(TM) High-Efficiency-at-Low-Power architecture, ALT6181 Multimode Multiband Power Amplifier supports quad-band GSM/EDGE and dual-band WCDMA/LTE mobile applications. Unit features integrated voltage regulator, separate single-ended RF chains, and high directivity couplers for optimum performance. Measuring 5 x 7.5 mm, amplifier is suited for handsets, smartphones, tablets, netbooks, and notebooks.

Krytar, Inc.    Sunnyvale, CA 94089
Feb 23, 2012 Covering broadband frequency ranges of 1.0-18.0 GHz and 2.0-18.0, respectively, Model 8010180 and Model 8020180 matched-line directional dividers (MLDD) come in 5.96 x 4.75 x 0.52 in. package with 3.5 mm coaxial female connectors. Both models offer 17 dB isolation, ±1.0 dB amplitude tracking, 5.5 dB insertion loss, and ±15° phase tracking. Max input VSWR is 2.10 and output is 1.75 for 8010180; respective values are 2.00 and 1.75 for 8020180.