Maxim Integrated Products    Sunnyvale, CA 94086
Jul 21, 2010 Model DS1877 controls and monitors all receiver functions for SFP and SFP+ optical modules, with full support for SFF-8472 specification. It monitors 4 analog channels, including temperature, VCC, and 2 external differential signals, and loss of signal is continuously monitored in both receiver channels. Contained in 5 x 5 mm, 28-pin TQFN package, SPF video controller is specified over -40 to +95°C temperature range and eliminates need for MCUs and software development.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 21, 2010 Drawing 1.5 µA battery power in standby mode, MAX36051 provides 128 Bytes of nonimprinting memory to securely store sensitive data. Internal tamper monitors and tamper detection inputs interface with external sensors, while on-chip battery-backup controller monitors main power and automatically switches to battery when main power is too low or not present. Housed in 4 x 4 mm CSBGA package, MAX36051 is specified from -40 to +85 and is suited for secure USB, power meters, and POS applications.

ON Semiconductor, LLC    Phoenix, AZ 85008
Jul 21, 2010 Supplied in hermetically sealed, 5.0 x 7.0 x 1.9 mm ceramic CLCC-6 SMD package, PureEdge(TM) NBVSBAxxx series provide 0.5 ps jitter reference clock. It meets requirements of 2.5 and 3.3 V low voltage positive emitter coupled logic (LVPECL) clock generation applications and offers tri-state enable/disable feature. High Q fundamental mode pullable crystal and PLL multiplier is used to provide frequencies from 60-700 MHz, with pullable range of ±100 ppm and frequency stability of ±50 ppm.

STMicroelectronics    Lexington, MA 02421
Jul 21, 2010 Designed to help reduce size of surge protectors for electronic equipment, SMxJ and SMxT Transil(TM) series provide specified energy absorption capability up to max operating temperature. There are 6 series in range offering surge energy from 100-1,500 W (10/1,000 µsec pulse). Surge capability at max junction temperature ESD protection meets IEC 61000-4-2 and MIL-STD-883G Specified with 8/20 µsec surge to meet IEC 61000-4-5 for electrical over-stress Leakage current specified at 85°C.

Linear Technology Corp.    Milpitas, CA 95035
Jul 21, 2010 Implementing Intel® IMVP-6/6+/6.5® protocols for smart voltage regulation, Model LTC3816 incorporates parallel input, 7-bit DAC, which dynamically adjusts output to Intel CPU core supply voltage from 0-1.500 V in 12.5 mV steps with +0.75% VOUT accuracy over temperature. Device operates from input voltage of 4.5-36 V, has onboard N-channel MOSFET gate drivers, and can control output currents up to 25 A. Housed in 38-lead SSOP or 5 x 7 mm QFN package, IC operates from -40 to 125°C.

Duraline Div., J.B. Nottingham & Co., Inc.    Islandia, NY 11749
Jul 21, 2010 Weatherproof when caped or mated, molded rubber 8-wire, 10 A, polarized plugs and connectors are available with 14 AWG cable and have max rating of 10 A, 600 V. Industrial-/commercial-grade quick disconnect connectors, suited for power/control applications, are molded to heavy-duty, 8 conductor, 600 V SOOW cable in solid Hypalon Rubber, UL/CSA-Rated to UL 94 V-0 in all colors. Specific products include 8MP-10 Male and 8FP-10 Female models.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 20, 2010 Supplied in 16-pin TQFN package, MAXQ1004 integrates random-number generator and AES encryption engine supporting 128-, 192-, and 256-bit key sizes. These features enable secure authentication and communication schemes while resisting analytical and cryptanalysis attacks. Along with 16 KB integrated flash memory and communication options such as SPI(TM) and 1-Wire® interfaces, MCU offers power consumption rates from 3.75 mA at 6 MHz to 300 nA in lowest power stop mode.

Anderson Power Products    Sterling, MA 01564
Jul 20, 2010 Designed to correct misalignment during blind mating, Power Drawer Connectors feature integral guide pins, with optional floating mount used to minimize fatigue stress on connector during blind mating. Pin and socket contacts are available for both connectors with crimp, solder cup, or printed circuit board termination. Power Drawer Connectors are used on N + 1 power supply and rectifier systems suited for server, telecommunications, and network applications.

Amphenol-Tuchel Electronics GmbH      Germany
Jul 20, 2010 Suited for industrial environments, Model C146M RJ45 Interface features housing that can accommodate up to 5 components alongside RJ module. Plastic body of module fixes and secures standard RJ45 components, while aluminum die-cast housing guarantees protection to IP65. Female connectors are spring bedded and, under intense mechanical stresses and vibrations, transmittance remains 100% without interruption or failure, in conformance with CAT5 standards.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 20, 2010 Composed of 2 VVAs integrated into 1 monolithic IC, MAX19790 delivers 44 dB of linearly controlled dynamic range with S21 flatness over frequency and all attenuation settings. Each attenuator incorporates control circuit that provides 22 dB of attenuation range with linear control slope of 10 dB/V. When operating over any 125 MHz contiguous band between 950-2,150 MHz, IC delivers typical and max flatness levels of 0.13 and 0.89 dB peak-to-peak, respectively, through 30 dB to total attenuation.

Analog Devices, Inc.    Norwood, MA 02062-9106
Jul 20, 2010 Featuring HDMI® Version 1.4 Specification support for color spaces, Advantiv® ADV7541 transmitter converts 480i/p and 1080i interlaced output into progressive 1080p format. It includes deinterlacer, consumer electronics control, level shifters, and MCU in 3.75 x 3.75 x 0.65 mm package. Unit also provides audio support of S/PDIF for compressed audio, including Dolby Digital® and DTS®, and 2-channel I2S audio for transmitting stereo at sample rates up to 192 kHz.

Linear Technology Corp.    Milpitas, CA 95035
Jul 20, 2010 In 15 x 15 x 4.32 mm LGA package, LTM4611 integrates main DC/DC power circuit and gate drive circuit plus inductors, MOSFETs, input and output bypass capacitors, and compensation circuitry. Switch mode DC/DC uModule® point-of-load (POL) regulator can generate its own 5 V N-channel MOSFET gate drive for voltage conversion from 3.3 VIN or less to loads as low as 0.8 V at up to 15 A. Conversion efficiencies at full load range from 81%-92% depending on VIN/VOUT values.

Altera Corporation    San Jose, CA 95134
Jul 20, 2010 Featuring up to sixteen 6.375 Gbps transceivers, 40 nm Arria II GX FPGAs are suited for wireless, wireline, test, medical, and storage applications. Arria II GZ FPGAs are equipped with up to twenty-four 6.375 Gbps transceivers, 400 MHz DDR3 interfaces, and up to 726 I/Os. Providing 1 Gbps LVDS support, both models include 350K logic elements and 16.4 Mb of embedded memory.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Jul 20, 2010 Housed in 3 x 3 x 1 mm package, 14-bit Xtrinsic MMA9550L extends 3-axis accelerometer functionality with programmable core and on-chip memory to enable advanced motion sensing. Unit manages multiple sensor inputs and can perform intelligent, system level decisions within application. Up to 12 inputs are consolidated by sensing hub of unit, which operates with slave port configurable as IIC or SPI, allowing calibration, compensation, and sensor functions to be offloaded from applications processor.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jul 20, 2010 Housed in 5.5 x 5.5 mm package with operating temperature of -40 to +125°C, Model MIC2829 incorporates 6 DC/DC buck converters, 11 LDOs, and digital level shifters for SIM Card support. Five LDOs provide output accuracy of ±3% and require only 40 µA of ground current to operate. Four of 6 converters incorporate HyperLight Load(TM) technology, which enables 87% efficiency at 1 mA. Supporting 100% duty cycle operation, remaining 2 DC/DC buck converters deliver greater than 96% efficiency.

Micrel Inc.    San Jose, CA 95131
Jul 20, 2010 Consuming 32 µA per channel when enabled, 150 mA triple-output Models MIC5387/85 offer voltage range options down to 1.0 V and provide up to 70 dB of PSRR for noise sensitive applications. Units operate from -40 to 125°C and offer full protection circuitry including current limit and thermal shutdown protection. Housed in 1.6 x 1.6 mm/2 x 2 mm Thin MLF® packages, respectively, Models MIC5387/85 are suitable for mobile phones, PNDs, PMPs, DSCs, notebook computers, and PDAs.

Micrel Inc.    San Jose, CA 95131
Jul 20, 2010 Supplied in SOIC-8L package, MIC3203 can drive multiple HBLEDs in series at more than 90% efficiency with ±5% current accuracy from input voltages of 4.5-42 V. Step-down High Brightness LED (HBLED) driver controller incorporates high-side current sense and PWM dithering feature for EMI control. Along with dedicated PWM dimming pin, features include external power switch, hysteretic control architecture and high-side current sense scheme, and adjustable operating frequency to 1.5 MHz.

Micrel Inc.    San Jose, CA 95131
Jul 20, 2010 With max output voltage of 35 V and switch current of more than 350 mA, Model MIC2619 can power most high-voltage bias applications, such as TV tuners. Unit implements constant frequency 1.2 MHz PWM current-mode control scheme and includes programmable overvoltage protection in case of fault condition. Housed in Thin SOT-23 6-pin package, IC has operating junction temperature of -40 to +125°C. Other applications include optical networking equipment, LCD bias supplies, and SEPIC converters.

Z-Communications, Inc.    San Diego, CA 92126
Jul 20, 2010 Model CRO2690A-LF operates at 2,690 MHz with tuning voltage range of 0.5-4.5 Vdc and features typical tuning sensitivity of 7 MHz/V. Operating over temperature range of -40 to +85ºC, unit delivers output power of 4 dBm at 5 Vdc supply while drawing 22 mA. Second harmonic suppression is -15 dBc for RoHS-compliant product. Measuring 0.5 x 0.5 x 0.22 in., it is suited for satellite communications and test and measurement applications that require ultra low phase noise performance.

Yageo Corporation    Taipei   Taiwan
Jul 19, 2010 Offered in 0402/0603/0805/1206 size range, AF Series utilizes special material in inner electrode that optimizes anti-sulfuration capabilities. Units are designed for environments exposed to high levels of contamination, which could include industrial control systems, sensors, electric instrumentation, and communication base stations. Series is also suited for electronic appliances used in areas with high concentration of sulfur gases such as hot springs and mines.