Electronic Components & Devices

Electronic Components & Devices, Test & Measuring Instruments

Test Sockets are designed for high temperatures.

January 17, 2002

DIP Test Sockets, for 350°C and 500°C applications, have high temperature ceramic body and high conductivity stainless steel contacts. Normally closed contacts provide twin beam wiping action. They are plated with 50µ in. gold over 50µ in. nickel. Sockets accept .300 in. center to .600 in. center row-row devices, up to 28 positions with leads on .100 in. pitch. They are offered in... Read More

Electronic Components & Devices

Parallel FIFO takes unlimited amount of data.

January 14, 2002

Radiation shielded Model 7206F high-speed Epi-CMOS FIFO microcircuit is organized so that data is read in same sequential order that it was written, and Full, Half Full, and Empty Flags are provided to prevent overflow and underflow. Expansion logic allows unlimited expansion capability in word size and depth with no timing penalties. Twin address pointers automatically increment with write and... Read More

Electronic Components & Devices

Inductors feature lead-free terminations.

January 11, 2002

Surface mount, wire-wound CC Series Inductors are used for RF applications in electronics industry, especially for wireless and test and measurement equipment where solderability is concerned. Models CC0603, CC0805 and CC1008 have inductance ranges of 1.6 to 270 nH, 3.3 to 820 nH, and 10 to 4700 nH, respectively. Model CF1008 is available for applications requiring inductance from 1.2 to 10 mH. Read More

Electronic Components & Devices

RJ-45 Jack features low profile.

January 11, 2002

Type AJT08D shielded RJ-45 jack is manufactured from UL-94VO glass filled polyester. It is available in 2, 4, 6 or 8 ports with 10 positions and either 4, 6, 8 or 10 contacts. Read More

Electronic Components & Devices

Multiple Chip IRED provides total output power of 6.0 mW.

January 8, 2002

CLE400F-905 4-leaded device contains three 905 nanometer IRED chips mounted in flat leaded PLCC package. Chips feature current III-V solid state technology with transparent gallium aluminum arsenide windows. Chips are wire bonded in parallel and overcoated with clear epoxy, which provides emission angle of ± 70° at half power points. Maximum operating temperature with clear epoxy lens is... Read More

Electronic Components & Devices

Stacked LED Assembly retrofits to current set-ups.

January 8, 2002

Multi-stack LED assembly allows custom configuration of LEDs stacked 1, 2, and 3 high, with spacing up to 6 in. wide, without special tooling. Operators can install from 6 to 36 LEDs at once in complex configurations. All LEDs have proper viewing angles, correct sequencing and polarity, and consistent color matching. Assembly also provides resistance to shock and vibration. It is made from UL... Read More

Electronic Components & Devices

Brushless Amplifiers offer DSP-based sinusoidal performance.

January 8, 2002

SS500A and SS600A SimpleServo digital brushless amplifiers range from 80 to 320 Vdc and 115 Vac/230 Vac; with peak currents ranging from 4 to 24 amps. Units can drive linear or rotary brushless motors with encoder feedback. SimpleServo drives accept +/-10 V analog for controlling torque and velocity, or Step-and-Direction for controlling positioning. Pass-through encoder output facilitates... Read More

Electronic Components & Devices, Test & Measuring Instruments

Filter Card provides DC offset compensation.

January 8, 2002

AAF-2, 2 to 8 channel, tunable low-pass filter features selectable frequency ranges in Butterworth, Bessel, Cauer, or Linear Phase characteristics that eliminate noise and alias errors while providing DC and Gain accuracy for 16-bit data acquisition systems. Filter channels are fully isolated from PCI bus, and are continuously tunable from 0.1Hz to 200kHz. Input and output range is up to ±l0V... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Reversed PC Chassis makes cabling easier.

January 7, 2002

Backwards RBC PC chassis puts expansion-card connectors, switch, drive bays and USB port in front for easy access. All-steel heavy duty rack-mount chassis is 19 in. wide at flanges, 4 rack units (7 in.) high, and 17.9 in. deep. It is available in 14-slot passive backplane or ATX motherboard versions. Applications include test lab and industrial control tasks that require convenient front access... Read More

Electronic Components & Devices

Test Solutions accelerate wireless IC development.

January 7, 2002

VG3000E/VG6000 Synthesized Vector Signal Generator and VN6000 Wide-band IQ Demodulator form complete IEEE 802.11a test solution for wireless LAN development. Units feature RF bandwidth up to 120MHz (-3dB). Frequency ranges are 4.96GHz to 6.2GHz/250kHz to 3.2GHz for VG6000, 250kHz to 3.2GHz for VG3000E, and 4.96GHz to 6.2GHz/220MHz to 3.2GHz for Demodulator. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Vision Systems

LED Lamps are manufactured using surface mount technology.

January 4, 2002

StackLED Lamps incorporate 1206-profile SMT LEDs and provide non-interrupted flow of information. They have double-sided printed circuit boards with 4 to 24 SMT LEDs on each side to provide 360 deg viewing. Electrical bases available are 15mm DC bayonet, 9mm miniature bayonet, candelabra screw and wedge based. StackLED lamps come in 6 colors, and all standard voltages (12V, 24V, 120V) as well as... Read More

Electronic Components & Devices

MOSFETs feature electrically isolated mounting.

January 4, 2002

IXUC100N055, IXUC200N055 and IXUC160N075 Trench Power MOSEFETs possess high current ratings of 100, 200 and 160 A, respectively. IXUC100N055 and the IXUC200N055 are rated at VDS (Drain Source Voltage) equal to 55V, while IXUC160N075 has VDS rating of 75V. All are housed in hole-less packages that conform to TO-220 outline. Frame is direct-copper-bonded alumina with 2500V isolation. Maximum... Read More

Electronic Components & Devices, Optics & Photonics

Photodiode Arrays are designed for scanning applications.

January 3, 2002

EPA-4400 Series consists of 8, 16, and 32 element photodiode scintillator arrays featuring high sensitivity of 400-1080 wavelength and uniform response of 0.30 A/W. Element size is 1.49 x 3.61 mm with element spacing of 1.587 mm. Arrays are suitable for X-ray and scanning applications such as spectroscopy, security systems, and baggage scanners. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Square Continuous Posts accommodate any centerline.

January 3, 2002

AMPMODU square posts can be inserted into printed circuit boards in virtually any configuration. Post is constructed of brass, comes packaged on reel, and is notched at desired length. Carrier strip is not required. Posts are available in 0.025 and 0.045 post sizes, in lengths of 0.400 to 1.0 in. in 0.010 in. increments, with tin or gold plating. The 0.025 square post is rated for up to 3A while... Read More

Electronic Components & Devices

Crystal Oscillator works in high-speed digital systems.

January 3, 2002

SD-A2920 Series Differential PECL Fast Edge Model is available in frequency ranges from 75.0 MHz to 200.0 MHz, making it suited for wideband frequencies such as Fibre Channel, Gigabit Ethernet, Infiniband, 10 Gbit, and Sonet. Supply voltages of 3.3 and 2.5 V are available. Applications include high speed, low jitter components, such as mainframes, storage, servers, workstations and networks. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Vision Systems

White LEDs can replace miniature incandescents.

January 2, 2002

Bright White LEDs have clear lens with 6700 K correlated color temperature. Requiring less than 80mW @ 3-4 V typical, LEDs provide 200 to 5600 MCD luminous intensity @ 20 mA. Solid-state devices can be used for general illumination, back lighting, and as indicators and light sources. Available off-the-shelf in standard T-1, T-1 3/4, and SMT packages and several luminous intensities, they are... Read More

Electronic Components & Devices

Integrated Circuit provides thermal management.

January 2, 2002

Miniature MIC280 two-zone thermal supervisor IC uses embedded thermal diodes for remote temperature measurement. It has 6 independent thresholds, I2C/SMBus compatibility, and programmable interrupt output. Available in 6-pin SOT23 packaging, MIC280 includes A-D converter, signal processing front-end, and one-wire diode interface. Fault queues and programmable digital filters provide noise... Read More

Electronic Components & Devices, Mounting & Attaching Products

Coaxial Connectors feature DC to 40 GHz performance.

January 2, 2002

2.92mm coaxial connectors provide high repeatability, and are compatible with K, SMA, and 3.5mm series connectors. They are designed for demanding applications at -55° to 125° C temperatures. Featuring type 303 stainless steel bodies and gold plated BeCu contacts, they require 8 to 10 in-lbs. coupling nut tightening torque, and are rated for >500 matings. 50 Ohm coaxial connectors have 750... Read More

Electronic Components & Devices

Bandpass Filter is suitable for digital applications.

January 2, 2002

Model 14584 passes single channel signals while providing rejection to adjacent channels, and is used in CATV, LAN, MDU, MSO and network applications. It offers high adjacent channel selectivity while maintaining low differential group delay specification. Unit features return loss greater than 18 dB over full video or audio range. Bandwidths of 4, 5, or 6 MHz are available for any CATV channel... Read More

Electronic Components & Devices

BGA Sockets come with pitches of 1.00 or 1.27 mm.

January 2, 2002

Model BGA adapter has 3 polarizing locating pins for alignment of adapter with socket and 3-finger female contacts that provide wiping action. Socket has stamped and formed contact pins. When mated together, socket and adapter measure only 0.125 in. high. Extremely low insertion and withdrawal forces provided by gold-plated mating contact system, make socket and adapter suitable for high I/O or... Read More