ON Semiconductor, LLC    Phoenix, AZ 85008
Apr 05, 2012 Differential switching ICs, offered in SPDT configurations, support high-frequency signals such as PCIe 3.0 and DisplayPort 1.2 I/O in notebook/desktop computers, servers, and network storage equipment. With 3-3.6 V supply range and 250 µA typ draw, 6-channel NCN3612B has on-state capacitance (CON) of 2.1 pF typ and an on-state resistance (RDSON) of 8 ohms typ. With 1.5-2.0 V supply range and 200 µA draw, 4-channel NCN3411 has CON of 2 pF typ and RDSON of 7.5 ohms typ.

Xilinx, Inc.    San Jose, CA 95124 3400
Apr 05, 2012 Fabricated in 40 nm, dual oxide process technology, Virtex®-6Q FPGAs provide anti-tamper features, ensuring protection of critical technology as instructed by DoD 5200.39. Also, anti-counterfeiting technology combats threat of fraudulent devices being introduced into defense systems. Available in I-temperature grade of -40 to +100°C as well as M-temperature grade of -55 to +125°C, FPGAs are suitable for avionics, electronic warfare, missiles/munitions, MILCOM, and ISR systems.

Synopsys, Inc.    Mountain View, CA 94043 4033
Apr 05, 2012 DesignWare® SoundWave Audio Subsystem is integrated hardware and software audio IP subsystem for system-on-chip (SoC) designs. Subsystem is fully configurable and supports 2.0-7.1 audio streams with 24 bit precision for audio applications such as digital TVs, set-top boxes, Blu-ray discs, portable audio devices and tablets. Analog audio codecs provide connections for line inputs and outputs, microphones, loud speakers and headphones with dynamic range of 96 dB.

Microsemi    Irvine, CA 92614
Apr 05, 2012 Equipped with customizable LCD controller, LCD Reference Design is based on SmartFusion® cSoC, which integrates FPGA technology with hardened ARM® Cortex(TM)-M3 processor and programmable analog blocks. OpenGL SC API runs on ARM processor, enabling developers to create GUIs for standard or customized LCDs. Architecturally partitioned, reference design allows engineers to harness processing power of ARM Cortex(TM)-M3 for key system layer control task management and algorithm execution tasks.

Texas Instruments, Inc.    San Jose, CA 95134
Apr 05, 2012 Designed for MSP430(TM) LaunchPad development kit, Audio Capacitive Touch BoosterPack includes C553x DSP with total active core power less than 0.15 mW/MHz at 1.05 V, enabling clear audio/voice MP3 encode/decode. MSP430G2452 MCU offers standby power of 0.5 µA and less than 1 µsec wake-up time for low-power applications. With capacitive touch interface, users can control volume, select song titles, and record and playback audio files. LED display, USB 2.0, and SD/MMC interfaces are also integrated.

Altera Corporation    San Jose, CA 95134
Apr 05, 2012 Cyclone® V FPGAs are offered in 6 variants including logic-only E; 3.125 Gbps transceiver GX; 5 Gbps transceiver GT; and SE, SX, and ST SoC variants with integrated dual-core ARM®-based hard processor system. Serial transceivers offer 88 mW power consumption per channel at 5 Gbps and over 4,000 MIPS processing performance for under 1.8 W. Along with hard IP blocks, FPGAs include design protection with features such as 256-bit AES with volatile and non-volatile keys.

Analog Bits Inc    Mountain View, CA 94041
Apr 05, 2012 With SERDES IP, customers can use cables with SERDES at either end to recover and retime signal. Pin-configurable macro uses standard CMOS logic process devices and exhibits optimal input sensitivity, jitter tolerance, and equalization. With 0.095 mm² active silicon area per lane, IP is suitable for variety of flip-chip and wire-bound packages embedded in connectors. Serial client interfaces can connect directly to SFPs and operate over frequencies from 125 Mbps to 12.5 Gbps.

XKL, LLC    Redmond, WA 98052
Apr 05, 2012 Featuring 1RU form factor, 100G DWDM Universal Starter Kit will boost optical channel rates to 100G per lambda. Design supports 10G and 100G on client side; 100G optical transport systems are designed to deploy as requirement for higher bandwidth applications and to aggregate internal service elements within carrier networks. For WAN and backbone regional networks, spectral efficiency is important in system engineering design.

Alliance Memory, Inc.    San Carlos, CA 94070
Apr 04, 2012 Rated for -40 to +85°C, Models AS4C4M16S-6TIN, AS4C8M16S-6TIN, and AS4C16M16S-6TIN offer densities of 64, 128, and 256 Mb, respectively. Devices feature fast access time from clock down to 4.5 ns at 5 ns clock cycle, and clock rates of 166 MHz. Internally configured as 4 banks of 1M, 2M, or 4M word x 16 bits with synchronous interface, SDRs operate from +3.3 V power supply. Units provide programmable read or write burst lengths of 1, 2, 4, 8, or full-page, with burst termination option.

Richco, Inc.    Morton Grove, IL 60053
Apr 04, 2012 As slotted cable holder with pressure grips, UCG-6BK mounts to panel using No. 6 or M3.5 screws. Product can accommodate up to 7 cable bundles, and cable holders can be removed to accommodate larger cable bundles. Featuring HDPE base (RMS-422) and TPE inserts (RMS-433), black grip is designed so that cables are pushed in by hand. Design also facilitates cable removal.

SNC Manufacturing Co., Inc.    Oshkosh, WI 54902
Apr 03, 2012 Available in models from 50 Va to 5 KVa, Global Control Transformers provide operator safety by delivering stable output voltage while accommodating momentary current inrush that occurs when electromagnetic devices are energized. Single-phase units include pre-wired primary and secondary fuse blocks mounted on top. Backed by UL, CSA, cULus, and CE agency approval, transformers are available with temperature classes adjustable by Va to meet customer requirements.

STMicroelectronics    Lexington, MA 02421
Apr 03, 2012 As IEEE802.15.4-certified platform, STM32W enables development of SEP 2.0-compliant smart grid applications with its memory capacity of up to 256 KB and code density made possible by ARM® Cortex(TM)-M3 processor core. MCU supports ZigBee® SEP 2.0, and use of IPv6-based Stack promotes interoperability between manufacturers and their PHY implementations. Along with certified IEEE 802.15.4 radio implemented on-chip, features include two 16-bit timers, encryption accelerator, and 12-bit ADC.

Richco, Inc.    Morton Grove, IL 60053
Apr 03, 2012 Available in both UL94 V-2 Nylon 6/6 and UL94 V-0 Nylon 6/6, Model SMLCBS offers 4 different standoff heights of 5/16, 3/8, 7/16, and ½ in. Support slides into pre-formed slot, leaving no protrusion under chassis. Reusable unit prevents rotation of circuit board and is removable by pressing locking tab.

Power Integrations, Inc.    San Jose, CA 95138
Apr 02, 2012 Featuring non-isolated, 93% efficient design, Model DER-322 drives nominal LED string voltage of 78 V at 230 mA from input voltage range of 195-265 Vac. Device fits inside A19 form factor and is EN61000-3-2 C (D) compliant. With PFC and CC conversion combined into single switching stage, design enables miniaturization and eliminates electrolytic input bulk capacitors. PF above 0.95 makes driver suitable for both commercial and consumer applications.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 02, 2012 Designed for use with high-temperature charge mode accelerometers, Model 4753B is powered using constant current sources and is compatible with IEPE designated instrumentation. Miniature device can accept sensors with insulation resistance as low as 100 kW without deterioration in performance. Offered with 10-32 jack input connector and BNC jack output connector, Model 4753B features 10 mV/pC sensitivity and turn-on time of less than 5 seconds.

OSRAM Opto Semiconductors GmbH    Regensburg D-93049  Germany
Apr 02, 2012 Manufactured using thin-film technology, Ostar Stage LEDs each contain 4 chips in red, green, blue and white. Units have flat glass cover with anti-reflective coating and produce ±9° beam of light. Overall brightness of LED at typical output of 10 W can be up to 700 lumens. This provides max brightness values of 146 lm in red, 234 lm in green, 1.3 W in blue, and 286 lm in white. Measuring 5.9 x 4.8 x 1.23 mm, LEDs are suitable for moveable stage lights, known as moving heads.

AutomationDirect.com    Cumming, GA 30040-9905
Apr 02, 2012 Products for pneumatic solenoid air valves and sensors include 3-wire connector cables, available in 5-pin spacing formats (8-18 mm); 4-wire transmitter cable, available in 8 mm format; and connector styles that include DIN 43650 standard forms A/B/C. DIN style industrial forms B/C are also available. With built-in surge suppression and yellow LED indicator, 24 or 110 V AC/DC models are rated for connecting with electronics; 230 V AC/DC models are rated for straight-wired products.

Omnetics Connector Corp.    Minneapolis, MN 55432
Apr 02, 2012 Promoting equipment size and weight reduction, .025 in. pitch Nano 360(TM) connectors use elements from Mil-DTL-32139 products. Standard designs and locking methods are available with pin counts from 2-28 positions, and standard sizes include 6-, 11-, 16-, and 28-position connectors. Polarized-insulator bodies allow for plastic/metal shell connector design styles, while threaded couplings, breakaway shells, and twist-lock housings are ready for cable to panel mount interconnections.

Cree, Inc.    Durham, NC 27703
Mar 30, 2012 Designed to accelerate adoption of LED lighting, XLamp ML family offers red, green and blue color options. XLamp® ML-C and ML-E white LEDs have typical voltage of 6.4 and 9.6 V, respectively, at 50 mA. Model ML-C delivers luminous flux up to 37 lumens in cool white and up to 31 lumens in warm white, both at 100 mA. Available in 80, 85, and 90 CRI options, XLamp ML Series is suited for architectural, hospitality, emergency vehicle, and decorative lighting applications.

Allegro MicroSystems Inc.    Worcester, MA 01615
Mar 30, 2012 Designed to drive one winding of bipolar stepper motor in microstepping mode, full-bridge A4975 features outputs rated for continuous output currents to ±1.5 A and operating voltages to 50 V. Internal PWM current control, combined with internal 3-bit nonlinear DAC, allows motor current to be controlled in full-, half-, quarter-, or eighth-step modes. Internal circuitry determines whether PWM current-control circuitry operates in recirculating, regenerative, or mixed current-decay mode.