Infineon Technologies AG Dep. CIC MC
  Germany
Aug 07, 2008 DECT solution, when combined with DOCSIS® 3.0 chipset, produces platform for North American cable service providers to deploy next-generation VoIP services operating over DECT 6.0 cordless telephones. Resulting platform, combining COSIC(TM) modem and DUSLIC(TM)-xT with Texas Instruments' PUMA 5 chipset, enables system integrators to develop eMTA (Embedded Terminal Media Adapter) products that conform to DOCSIS 3.0 and DECT 6.0/CAT-iq(TM) cordless telephony standards.

Infineon Technologies AG Dep. CIC MC
  Germany
Aug 07, 2008 Comprised of 3 types, MIPAQ(TM) modules promote efficient power inverter designs in UPS, industrial drives, solar power plants, and air conditioning systems. All MIPAQ products feature IGBT (Insulated Gate Bipolar Transistor) 6-pack configuration. MIPAQ base module integrates shunts; MIPAQ sense module offers additional current measurement feature that is fully digital with galvanically isolated output signals; and MIPAQ serve module includes adapted driver electronics.

Infineon Technologies AG Dep. CIC MC
  Germany
Aug 07, 2008 Suiting industrial, consumer, and telecommunications applications, OptiMOS(TM) 3 N-channel MOSFETs offer thermal resistance of 1°K/W to PCB, R th-jt of 16°K/W, top- and double-sided cooling, and continuous current rating of 100 A. In SuperSO8 package, they are available in 40 V, with RDS(on) as low as 1.8 mW; 60 V, with RDS(on) down to 2.8 mW; and 80 V models, with RDS(on) down to 4.7 mW. Versions available in S3O8 packages include 60 and 80 V models with RDS(on) of 6.7 and 12.3 mW, respectively.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Aug 07, 2008 Power Line kit, OVPL5W3K Series, includes 5 FR4 PCBs measuring 8 x 7/16 in. Each board features three 0.5 W white LEDs with viewing angle of 120°, typical CCT of 5,000 K, and typical luminous flux of 50l m per board @ 15 V (125 mA per board). Wire harness with connector, hand insertion tool, and 15 V power supply complete this total lighting solution. Flexible and scalable, kit lets users configure LED placement for uniform illumination in any lighting application.

STMicroelectronics
GENEVA   Switzerland
Aug 07, 2008 Designed for precision clock management in embedded and handheld applications, 2-channel STCD1020, 3-channel STCD1030, and 4-channel STCD1040 integrate AC coupling capacitor to minimize external components. Capable of single-ended sine-wave or square-wave transmission in 10-52 MHz range, ICs can drive loads up to 20 pF to simplify output circuitry. They feature 2.5-3.6 V standard supply voltage, 1.65-2.75 V operation range, and -40 to +85°C specified operating temperature range.

Cap Wireless, Inc.
Newbury Park, CA 91320
Aug 06, 2008 Designed for defense electronics and homeland security industries, CHPA0618-1 ultra-broadband power amplifier incorporates GaAs MMIC technology into Spatium(TM) broadband spatial combining architecture. Unit has multiple element architecture that provides protection from single point failures and enables dispersive, 3D heat dissipation. Featuring 40 W typical saturated power, it includes soft-fail in event of device failure, with no warm-up or turn-on delay.

Future Lighting Solutions
Pointe-Claire   Canada
Aug 06, 2008 Combining 8-bit All Flash(TM) MCU with 4-channel HCD, µPD78F8024 HCD/LED MCU can be used in lighting applications that employ multiple LEDs as well as industrial control applications such as stepping motors, solenoid drives, and switch-mode power supplies. Supporting wide input voltage range of 9-38 V, flexible 4-channel architecture also enables designs using both buck and boost regulator topologies. Unit is available in 64-pin LQFP.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 05, 2008 AEC-Q100-qualified for -40 to +125°C operation, ADuM120xW 2-channel, ADuM130xW 3-channel, and ADuM140xW 4-channel digital isolators are designed for motor drives and battery management systems. They provide multiple isolation channels in various configurations and data rates up to 25 Mbps. Based on iCoupler® chip-scale micro-transformer technology, units include digital interface and CMOS-based parts that operate with supply voltage on either side from 3.0-5.5 V.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Achieving -57 dB PSNR to minimize jitter degradation in noisy power-supply environments, MAX3622 utilizes low-noise VCO and PLL architecture to generate two 0.14 psRMS clock outputs from 25 MHz crystal resonator. It integrates LVPECL and LVCMOS buffers to provide 125 MHz LVCMOS and 156.25 MHz LVPECL output frequencies simultaneously. Specified over 0-70°C commercial temperature range, unit operates from 3.3 V ±5% and is available in lead-free, 16-pin TSSOP package.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Suited for microprocessor and MCU power-monitoring applications, MAX6394 integrates highly precise bandgap reference which allows for trimming reset thresholds to as much as ±0.6% accuracy at room temperature. Unit has 9 fixed voltage thresholds, each with 0.7, 14, 105, and 826 msec preset timeout periods. Operating between -40 to +125°C automotive temperature range, it provides open-drain output that can be pulled up to 6 V, even when VCC is less than pull-up voltage.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Transmitting OOK/ASK/FSK data at 315 or 390 MHz, MAX7058 supports dual-frequency operation with single 15 MHz crystal, and can operate at any 2 frequencies in 300-450 MHz range with use of different crystal frequencies. It integrates wideband VCO and internal tuning capacitors that can be programmed to match the impedance of power amplifier to antenna. Device operates from single 2.1-3.6 V supply, and draws less than 1 µA and 8 mA in standby and transmit mode, respectively.

Intersil Corporation
Milpitas, CA 95035
Aug 05, 2008 Ensuring overvoltage protection, Model ISL9301 single-cell Li-ion/polymer battery charger features high input voltage and integrated overvoltage protection circuit which enables automatic shutdown feature when input voltages exceed 10.5 V during normal operation. With multiple power paths, one for charging and another for device operation, it enables simultaneous charging and powering of any handheld device operating from single cell Li-ion battery.

OnChip Devices, Inc.
Santa Clara, CA 95054
Aug 05, 2008 Suited for space sensitive applications in portable devices such as mobile handsets, PC/notebooks, and MP3 players, ESD2200 TVS diodes dissipate ESD strikes of ±30 kV contact discharge, meeting requirements of IEC 61000-4-2 international standard. Offered in 2, 3, 4, and 5 channels, they exhibit less than 20 pF input capacitance. Packaged in miniature SOT23, SOT143, and SC70 (SMD), units offer clamp voltage as low as 10 V, which eliminates IC latch-up and soft errors.

Allegro MicroSystems Inc.
Worcester, MA 01615
Aug 05, 2008 Available in 48L eLQFP package, Model A4935KJP-T is suited for systems that use sinusoidal control of motor phase currents. Automotive grade 3-phase MOSFET pre-driver IC integrates regulating charge pump that provides full gate drive capability for battery voltages down to 7 V and reduced gate drive for battery voltages as low as 5.5 V. It features fault diagnostics and reporting to decode and identify faults as well as top-off charge pump and boot strap charge management.

Components Corp.
Denville, NJ 07834
Aug 04, 2008 Featuring 0.125 or 0.100 in. centers, TP-104, -105, and -106 test points can accommodate 0.062 in. thick PCBs. Provided precut to any of 30 positions, loop-style TP-104 and oval-loop style TP-106 test points feature 0.063 in. mounting holes, while TP-105 is available in up to 40 positions, has loop profile for positive loop retention, and fits into 0.035-0.042 in. hole. Devices are designed to ensure secure, non-slip grip of alligator clips, probes, J-hooks, tips, and grabbers.

Phoenix Contact
Harrisburg, PA 17111 0100
Aug 04, 2008 Including 24 Vdc power supply, UPS system, surge protection, and antenna adapter, RAD-SYS-NEMA4X-900 enclosure simplifies installation of industrial wireless radio modems and small RTU devices. Power supply with backup prevents failure of critical operations due to power dips and brown-outs, while surge arrestor protects against lightning and surges. Dual latching lockable lid prevents unauthorized access, and pre-wired power rail has space for Trusted Wireless or GSM/GPRS radio modem.

Crystek Corporation
Ft. Myers, FL 33913
Aug 04, 2008 Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use, unit operates from single +5 V supply consuming only 60 mA.

Broadcom Corp.
Irvine, CA 92618
Aug 04, 2008 Combining WiFi®, Bluetooth®, and FM functionality into single 65 nm silicon die, Model BCM4325 utilizes coexistence algorithms to minimize interference caused by multiple wireless technologies operating on single chip in same frequency band. Shared antenna system intelligently manages Bluetooth and Wi-Fi radios to optimize coexistence with other radio technologies. Integrated chip is suited for mobile phones and other consumer devices.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 04, 2008 Housed in 10 x 10 mm surface mount package, ADuM540x Series integrates iCoupler® digital isolation technology and isoPower(TM) DC-DC converter, which provides up to 500 mW of regulated, isolated power and can operate at 5.0 or 3.3 V. Based on chipscale transformers, iCoupler digital isolators condition and drive data across transformers, while isoPower converter employs switches, rectifiers, and regulators to generate power that is isolated to same degree as data channels.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 04, 2008 Designed to condition output of low-voltage, single-supply DAC, Models AD5750 and AD5751 can drive resistive loads up to 1.5 kW, capacitive loads up to 1 µF, and inductive loads up to 0.1 h. Units achieve accuracy level of 0.1% TUE under all operating conditions. Model AD5750 operates from dual ±12 V to ±24 V supplies, while Model AD5751 operates from single 10.8-60 V supply. Specified over -40 to +105°C range, both incorporate 30 MHz SPI and power-on reset circuitry.