Spectrum Control, Inc.
Fairview, PA 16415
Dec 02, 2008 Utilizing ceramic capacitors as filter element, EMI Filter Plates feature epoxy potting for protection from physical stresses and rubber pin protector to prevent leads from being bent during transit and handling. Units provide EMI filtered signal line between electronic modules with isolation from 5 MHz to 18 GHz. Plates come in 2 mm high-density model with up to 74 lines/plate as well as .100 in. standard-density configuration with 60 pins/plate.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division
Milford, CT 06460
Dec 02, 2008 With LINKOSITY® connections, Pre-Wired Metal Raceway offers flexible, UL Listed System that allows users to relocate furniture and equipment without need to access internal wiring of raceway. Primary applications include school and university laboratories, pharmaceutical laboratory facilities, modular furniture manufacturers, and commercial kitchens.

Del City
Milwaukee, WI 53209
Dec 02, 2008 Available in vinyl- and non-insulated models, Step-Down Butt Connectors feature consistent wall thickness throughout entire length of terminal, providing secure crimp. Each is color-coded with industry standard gauge marks for identification. Translucent, vinyl-insulated units provide protection against wire corrosion and stripping.

Littelfuse, Inc.
Des Plaines, IL 60016
Dec 02, 2008 Featuring 6 x 32 mm ceramic body and Amp ratings of 10-30 A, 505 Series fast acting cartridge fuses can interrupt fault currents at 500 Vac or Vdc. AC and DC ratings make product suitable for both primary (AC) and secondary (DC) circuit protection. Suited for applications in uninterruptable power supplies (UPS) and other high-energy equipment, fuses are RoHS-compliant/lead-free, and are recognized under UL and CSA component programs.

Emerson Process Management
Austin, TX 78754
Dec 02, 2008 DeltaV smart switches incorporate auto-lockdown security capabilities that let user automatically lock/unlock port access of all switches in network; lockdown disables all unused network ports on switch. To prevent accidental and deliberate connection of unauthorized device to switch, products offer one-click lockdown application. DIN rail- and rack-mount versions of these fixed port and modular switches provide Megabit and Gigabit speeds over wired and fiber communications.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Dec 02, 2008 Rated for 6 and 10 A, Corcom P Series is configurable platform that can incorporate on/off switch, voltage selection, fuse holder, and shield. UL Recognized, CSA Certified, and VDE approved modules are rated up to 10 A at 250 Vac, 50/60 Hz. Modules are suited for applications including healthcare equipment, household machinery, single- and switched-mode power supplies, and portable electronics devices.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Dec 01, 2008 Equipped with nickel-plated steel locking lever and interface seal for IP65 protection, HM.16 Connectors feature size 6 form factor, cast-aluminum housing that accepts various inserts from HTS industrial connector family. Mounting footprint can be adjusted to fit motor's dimensions, up to 140 x 140 mm. Range of inserts include high-current/voltage circuits covering 150 A/250 A/5,000 V, 1 to 25-position power and control signal inserts, coax, Twinax, and Ethernet.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Dec 01, 2008 Designed for use with multi-band mobile phones, CEG23 series compact isolator includes LGA terminals which contribute to mounting space reduction. It utilizes two-port circuit technology, integrated circuit board, and electrode construction that results in reduction of characteristics such as dispersion, insertion loss, and variation within bandwidth.

ITT Interconnect Solutions
Santa Ana, CA 92705
Nov 28, 2008 Suited for industrial, military, and aerospace applications, Trinity MKJ Series features size 23 pin and socket contacts with equivalent electrical performance of size 22 contacts, minimizing contact spacing to 0.193 mm. LCP inserts can hold 3-85 size 23 rear-release beryllium copper crimp contacts accommodating No. 22-28 AWG wire, while rear fluorosilicone wire seal grommet provides environmental seal. Threaded, breakaway, and bayonet style coupling mechanisms are available.

Meyda Tiffany
Yorkville, NY 13495
Nov 28, 2008 Kingston Gothic Chandelier (67969) is designed and handcrafted with 2 tiers and 12 arms with faux candlelights featuring wax-dripping appearance. Decorated with studs, chains, and three rings, product measures 37 in. wide and can be suspended 41.5-71.5 in. from ceiling. It is designed to produce gothic look and is complemented with Matte Copper Vein finished base.

Murata Power Solutions, Inc.
Mansfield, MA 02048
Nov 28, 2008 Pin-compatible with quarter-brick modules, eighth-brick UWE Series offers 4:1 input voltages of 9-36 Vdc or 18-75 Vdc, choice of fixed output voltages from 3.3-24 Vdc, and up to 75 W power ratings from 0.9 x 2.3 x 0.36 in. package. Remote On/Off control, trim, and remote sense functions provide compensation for line drop errors, and self-protection features prevent damage to converter and outside circuits. No reverse conduction allows monotonic start-up into pre-biased loads.

Binder-USA, LP
Camarillo, CA 93012
Nov 28, 2008 Pre-assembled for Profibus and Ethernet users, M12 shielded panel-mounted male or female connectors feature Profibus receptacle attached to shielded cable with twisted pair of AWG 22 wires. Receptacles are available in front- or rear-mount design for mounting to control cabinets, while connectors are offered in B-coded version with 0.5 m long cable, and feature 2 gold-plated contacts crimped to twisted pair of wires. Rated current is 4 A at maximum operating voltage of 250 V.

ET Solar Group Corp
Pleasanton, CA 94588
Nov 28, 2008 Compatible with all types of standard flat solar modules, ET-D81 dual-axis tracking system incorporates features designed to withstand marine and desert environments. It is controlled by astronomical program which automatically adjusts orientation of solar modules so they are perpendicular to sun all day long. Each tracker has module area of 85 m² and can mount panels of more than 11 KWp. System automatically stows modules to flat protection position when wind speed is over 43 mph.

Signametrics Corporation
Seattle, WA 98115
Nov 28, 2008 Measuring 5 x 7 x 1.3 in., SMU4032 USB Switching Module lets users maintain 7½ digit measurement accuracy across switching architecture. Instrumentation specifications enable 6½ or 7½ digit DMM to deliver its full accuracy, and 35 differential inputs offer configuration flexibility. Along with thermal EMF errors of less than 1 µV, features include isolated power and relay drive, guarded/shielded construction, on-board MCU, and built-in self-test functions.

Littelfuse, Inc.
Des Plaines, IL 60016
Nov 26, 2008 Available in ampere ratings from 0.5-16 A, with interrupting capability up to 1,500 A @ 400 Vdc, 477 Series ceramic-body, time-lag cartridge fuses are also rated for 500 Vac usage. They come in 5 x 20 mm package and are available in cartridge as well as axial lead configurations, providing design and installation flexibility. RoHS-compliant and Pb-free products can be used in power supply circuits before and after PFC capacitor banks.

Laird Technologies
Chesterfield, MO 63017
Nov 26, 2008 Featuring monolithic assembly and 0.6 x 0.3 x 0.3 mm dimensions, LI0201 series offers impedance versus frequency characteristics with minimal DCR for EMI noise suppression on high-frequency or broadband digital signal lines. Design conserves mounting space, making beads suited for dense, compact circuit board construction in portable/handheld electronic devices. They can be placed close to EMI source or receptor of external interface or internal signal interconnection.

SolFocus, Inc.
Mountain View, CA 94043
Nov 26, 2008 Slated for utility-scale installation, Concentrator Photovoltaic System, SF-1100S-CPV-28, utilizes system of reflective optics to concentrate sunlight 500 times onto small solar cells. CPV panels are integrated with advanced tracking system that continuously aligns solar array with direct sunlight as sun move across sky, resulting in energy generation which matches peak demand periods. Since systems are constructed of aluminum and glass, they are over 95% recyclable.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Nov 25, 2008 Surface-mount gas discharge tubes (GDTs) help protect high-speed xDSL modems, splitters, DSLAM equipment, AIO printers, base stations, and security systems from damage caused by overvoltage events. Compliant with various industry standards, products are available in 2- or 3-electrode versions and provide reliable, low-capacitance (0.5 pF min) protection for telecom/datacom applications. Key parameters include voltage range of 75-600 V and sizes from 3-8 mm.

AVX Corp.
Myrtle Beach, SC 29578
Nov 25, 2008 Available in 2- and 3- position configurations, 9176 and 9177 Series are end-to-end stackable to deliver exact number of terminations required. Units are rated at 10 and 15 A and accept 18-24 AWG and 14-20 AWG solid or stranded wires, respectively. Discrete devices deliver minimum insulation resistance of 100 MW and max termination resistance of 20 mW. Manufactured from high-temperature nylon, connectors operate from -40 to +105°C.

DDP Supply
El Segundo, CA 90245
Nov 25, 2008 Comprised of solid-state, bayonet-based LED lamp and impact-resistant Lexan(TM) lens, PowerLine® PL16 mounts in 5/8 in. hole and comes in 24, 48, or 120 V designs for industrial plants and utilities. Insulating polyester housing offers protection in tight-fitting spaces, and thermoplastics keep light units running cool while promoting light intensity. Able to retrofit to GE ET-16 sockets, light offers operational lifetime of up to 100,000 hr and comes in various color options.