Tatsuta System Electronics Co., Ltd
Osaka 578-8585  Japan
Jul 07, 2005 With total thickness of 22 microns, SF-PC5000 film is formulated for flex interconnects, COF, hinge applications in cellular phones, and LCD drivers. Base dielectric is 5 microns thick soft epoxy, covered with 0.1-0.15 microns of silver and 17 microns of Anisotropic Conductive Adhesive. Film exhibits thermal stability during reflow with no blistering or warpage, and minimal shrinkage. It comes with 50 micron PET transfer film and 120 micron film for protection.

Dynapace Corp.
Arlington Heights, IL 60004
Jun 09, 2005 Suited for inline test and programming of RF producing or sensitive product, 1-Meter test enclosure provides RF shielded environment in moving PCB assembly line. It incorporates edge carry conveyor, RF-tight doors, clamp to hold product securely, and lifting mechanism to bring test fixture in contact with bottom of PCB. EMI/RFI shielding effectiveness is greater than 60 db up to 6 GHz. Product up to 18 x 20 in. with above board clearance of 1 in. can be accommodated.

Hybricon Corp.
Ayer, MA 01432
Mar 31, 2005 Featuring stackable design for vertically mounted cards, 10U Series RME1021M cool extremely dense CPU and DSP boards. Dual DC impellers powered by dedicated power supply output provide 16.1 cfm per slot. Included are front and rear cover panels with honeycomb inlet and exhaust, and provisions for shielded connectors for I/O. Enclosures are available with 21-slot CompactPCI®, VME64x, VME, or VXS backplanes and up to 2,400 W of embedded power.

Tecan
Rancho Santa Margarita, CA 92688
Mar 18, 2005 Standard-pitch screening cans provide RFI screening and can be re-flowed with conventional and SMD components. Selection of can sizes, profiles, and mounting options allow users to select components, which assure maximum RFI performance and compatibility with production requirements. Cans can be supplied with choice of lids, sidewalls, and mountings. Standard pitch system covers 20 x 20 mm to 75 x 125 mm. Low-profile cans are available down to 2.5 mm high.

Holland Shielding Syst. BV
  Netherlands
Sep 30, 2004 EMI shielding sleeve allows cable routing during assembly. Material is conductive Amucor film that offers full protection against radiation. Optional terminating earthing connections improve shielding performance. For moving/bending flat cables, self-adhesive flexible solution, with conductive textile, combines mechanical and screening properties. Sleeve is also available for round cables with diameter up to 45 mm on 100 m rolls.

Kintz Plastics, Inc.
Howes Cave, NY 12092
Apr 29, 2004 In-house painting facility runs 3 shifts so thermoformed part can be prepped, painted, and shipped within hours after it is formed. Screen Printing and Hot Stamping place logos, model designations, warnings, and other prominent information on thermoformed part. RFI and EMI shielding to interior of panels for electromechanical and electronic products is applied to exact specifications. Unlimited combination of surface finishes and textures are offered.

Melles Griot Laser Group
Carlsbad, CA 92009
Mar 24, 2004 ScienceDeskâ„¢ Faraday enclosure shields experiments in sensitive applications from high-frequency electromagnetic waves, drafts, light, and electrostatic fields. It attenuates electromagnetic interference by up to 50 dB @ 10 MHz and 29 dB @ 1 GHz, and thermal variations and dust contamination of work area are also reduced. Aluminum frame and panels mount onto ScienceDesk workstation, providing grounded system that does not interfere with vibration-isolated tabletop.

Zippertubing Co.
Los Angeles, CA 90061 0129
Jul 07, 2003 Constructed of 4-ply knitted tin copper-iron (SnCuFe) wire, Zipper-Mesh® enables users to add additional EMI protection to new or existing designs. Using heavy-duty mechanical zipper closure enables tool-less installation, allowing access to cable assembly for service, repairs, or redesign. Flexible, durable mesh is available in sizes from 1 in. and larger, with or without external protective jacket. Custom lengths to 100 ft long are available.

Gore, W. L., & Associates, Inc.
Newark, DE 19711
Feb 04, 2003 Multi-cavity, board-level snapSHOTâ„¢ is made of metallized, thermoformed plastic. It installs and removes easily and accommodates intricately shaped designs. Electrically insulated on inside, shield allows for significant thickness reduction over conventional shielding. Unit is attached to PCB panel using BGA spheres. Packaged in bulk, trays, and in tape and reel, shield can be installed using manual, semi-automated, and fully automated equipment.

Molex Fiber Optics Div. Of Molex, Inc.
Downers Grove, IL 60515
Oct 30, 2002 Adapters increase shielding effectiveness to greater than -50 dB at 4 GHz while external shutter system provides dust protection and eye safety features. Constructed of die cast bodies with EMI gasket that seals adapter to panel, units are available in 2 mounting orientations: straight and 45° angled. Additional mounting flexibility is provided via optional screw or snap mounting style adapters. EMI adapters include SC, LC, and MPO styles.

Samtec, Inc.
New Albany, IN 47151 1147
Oct 24, 2002 OptoCageâ„¢ SFP (Small Form-factor Pluggable) cages complement 20-pin connectors (MECT series). With one-piece design, EMI suppression characteristics, and rigid materials and construction, OptoCage ensures stability and retention force. SMT connectors and cages (including press-fit, PCI press-fit, and solder lead versions) are designed to exact SFP specification, making them compatible with all make and model SFP optical transceivers and patch cables.

Lindgren R.F. Enclosures, Inc. An ESCO Technologies Co.
Glendale Heights, IL 60139 4019
Oct 02, 2002 Single Knife Edge Door features precision formed knife edge, recessed contact mechanism, and two-point latching system. Standard door measures 3 x 7 ft, has 20-min fire rating, and provides shielding attenuation levels of 110 dB at frequencies up to 1 GHz, 100 dB up to 18 GHz. Custom sizes up to 25 x 25 ft are available. Ideal for heavy industrial environments, modular, welded, and pan-formed RF shielded enclosures, and anechoic chambers.

RTP Co.
Winona, MN 55987
Sep 17, 2002 Radiopaque compounds can be formulated to be visible under x-ray imaging, as shield to protect people from x-ray generating sources, or to produce shielding components to enclose radiation-generating sources. Compared to lead, Radiopaque has similar radiation-shielding properties, ease of forming, and comparable density, without toxicity and disposal issues.

Maxwell Technologies, Inc.
San Diego, CA 92123
May 21, 2002 Xray-Pakâ„¢ radiation mitigation packaging shields integrated circuits in military satellites from radiation effects of nuclear blasts. It combines flexible, lightweight, metal packaging with shielding that protects microelectronic components, such as monolithic and multi-chip data converters, memory and logic devices, from X-ray emissions.

Zippertubing Co.
Los Angeles, CA 90061 0129
May 17, 2002 DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is –40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.