Keystone Electronics Corp.
Astoria, NY 11105
Nov 23, 2009 Suited for high-density PCB packaging, low-profile Coin Cell Retainers are designed for lead free solder and traditional reflow processes. Units protect battery from shorting if inserted incorrectly, and allow user to stack two 20 mm cells on top of each other to achieve 6 V of power on same board. They are also suited for single cell 3-volt applications. Offering clearly marked polarity, rugged parts include solder tails that support visual inspection systems.

Memory Protection Devices
Farmingdale, NY 11735
Nov 19, 2009 Available in 20 styles ranging from 10-24 mm dia, with either printed circuit pins or SMD leads, Lithium Battery Gliders feature built-in circuit protection and prevent electrical connection by battery when upside down. Retainer is made of nickel-plated phosphor bronze and has pressure contacts that offer low electrical resistance while maintaining tight connection with battery. Versions that hold 2 batteries in series for 6 V applications are also available.

PCT International Inc.
Gilbert, AZ 85233
Nov 05, 2009 Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

Keystone Electronics Corp.
Astoria, NY 11105
Sep 11, 2009 Designed for surface or through-hole mounting, 1/3N Lithium Battery Holders are supplied with heat-resistant, UL 94V-0 rated nylon housings suited for all soldering and reflow operations. SMT version features gold-plated phosphor bronze contacts, while THM version incorporates tin-plated phosphor bronze contacts and mounts directly on PCBs.

Automation EZ LLC
Tucson, AZ 85741
Jun 22, 2009 Designed to accommodate in-process quality checks, Battery Assembly Cell is available as Complete Assembly Cell or as Individual Automated Semi-Automated battery assembly substations. Line consists of automatic tab welding machine; cell winding machine; jelly roll insert-bottom, tab weld, seam former; electrolyte fill, cap, weld cell closer; cell label shrink wrap; and cell pressure/leak tester. All tension controls, number and placement of tabs, and web speeds can be adjusted from touch screen.

Philadelphia Scientific
Montgomeryville, PA 18936
Dec 09, 2008 Changer-mounted water supply enables battery room personnel to immediately water batteries even as they are being retrieved from charging rack. It features powder-coated industrial steel frame that is secured to back frame of battery changer and cradles 20 gal polypropylene tank. Submersible pump, mounted inside tank, provides water volume and pressure, while control unit mounted on top of tank provides on/off switch, power indication, and run-dry protection.

Telect Inc.
Liberty Lake, WA 99019
Jul 09, 2008 Designed for multi-carrier power amplifier (MCPA), radio, battery, and other outside plant applications, Telect Modular Enclosure (TME) has standard overall footprint of 30 x 31 x 88 in. It provides 45 rack units of interior space for variety of equipment. Options include vented or solid top panels, doors to handle HVAC, heat exchange, or direct-air cooling equipment, single or modular 3-piece hatch to handle exhaust shrouds (MPCA), and 19, 23 in., or mixed equipment mounting rails.

Quick Cable Corp.
Franksville, WI 53126
Feb 26, 2008 With Battery Relocation Kits, users can relocate their battery in another area of their vehicle or boat for better weight distribution or traction, to create more room, or to facilitate access. Available in 5 versions, kits include all parts need to relocate or add another battery, and allow for top post or stud batteries.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Sep 20, 2007 Addressing emergency lighting requirements in hazardous locations where explosive gases may be present, Mercmaster III Emergency Battery Pack luminaire features electronic ballast suited for up to 84 W lamps. Product is designed to provide instant-on emergency lighting during blackouts and is also UL-listed for continuous and semi-continuous normal usage in industrial areas prone to excessive moisture, severe weather conditions, dirt, dust, and corrosion.

CommScope, Inc.
Claremont, NC 28610
Sep 05, 2007 Capable of using lead acid or nickel cadmium telecom batteries, 30EC Modular Battery Cabinet measures 31.5 x 31 x 30 in. and can be stacked 2 high. Reserve power storage system has 2 shelves; AC-powered battery heating system; and separate breakers for installation, turn-up, and maintenance control of each battery string. Along with multiple conduit and placement options, system offers alarm and status signals, weather-hardened enclosure, and quick disconnect battery cabling.

Memory Protection Devices
Farmingdale, NY 11735
Jun 18, 2007 Designed for D-size batteries, BHD-2 offers 0.026 in. thick contacts of nickel-plated stainless steel and built-in reverse battery protection that prevents contact when battery is inserted backwards. PBT body, resistant to chemicals and solvents, is specified for continuous use over -40 to +140°C range and can survive peak up to 215°C. Unit may be mounted via PCB mounting with twin 0.1 in. wide PCB tails for stability and strength or via 2 wire holes on contact tails for hard wiring.

International Components Corp. (ICC)
Hauppauge, NY 11788
Mar 23, 2007 In-Pack Charge Control works in conjunction with battery's safety circuitry to ensure proper charging conditions over life of battery pack. It places voltage and current regulation, charge termination, and safety mechanisms necessary for properly charging Li-Ion batteries into battery pack itself. Removal of charge circuitry from host device serves to reduce PCBA area. Solution limits charge current to preset level per cell manufacturer's recommendation.

Kimball-Midwest
Columbus, OH 43228
Feb 28, 2007 Able to be used with all types of vented lead-acid batteries, ReCharge - Battery Life Extender dissolves sulfation to restore battery performance and prevent new deposits from forming. It chemically cleans all plates and separators, promoting equal voltage, amps, and specific gravity in each battery cell. Solution also serves to lower internal resistance and gassing as well as slow rate of self-discharge. With continued use, batteries charge faster and hold charge longer.

Philadelphia Scientific
Montgomeryville, PA 18936
Jan 19, 2007 Stealth Float(TM) float-based battery watering system operates with water pressure from 3-60 psi and suits installations of 5-25 batteries. Without requiring multiple float sizes, .60 in. high system ensures that all cells are filled to same level simultaneously. It includes kink- and crush-resistant tubing with push-fit connections, and fill-level indicator, viewable on top and side of battery, to show when water is required.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Nov 09, 2006 Litheon(TM) 36V Flexible Power System enables users to customize 36 V tool based on weight and runtime. Lightweight SlimPack suits one-handed and overhead applications with hammer drill/driver, while FatPack is used for heavy-duty functions such as 45° bevel cuts and ripping plywood with circular saw. Incorporating cooling fins and vents, system extends battery cycle-life.

Keystone Electronics Corp.
Astoria, NY 11105
Aug 04, 2006 Intended for automated placement in SMT applications, top-loaded Coin Cell Retainer has solder tails located outside insulating material to support vision systems and other inspection systems. Engineered with spring tension dynamics, device assures low contact resistance, features clearly marked polarity, and is also available for through-hole use. Retainer accepts 11.6 mm coin cell lithium batteries from major manufacturers.

Liquid Precision, Inc.
Newfoundland, PA 18445
Jul 20, 2006 Designed to limit exposure workers have with battery acid, Multi Flow Series Float System features low profile that prevents damage from dragging battery cables. Operator waters entire battery by attaching quick connect fitting to water supply, while staying at safe distance. Each float valve is equipped with protective helmet, pair of flame arrestors, and float shroud. Floats are available in 4 fill levels and fit most batteries.

Alti-tech Engineering Inc.
Vancouver, BC V5M 1X3
May 31, 2006 Procyon Power Belt battery pack offers 150 Wh of 5-24 V programmable power supplied by pair of E-One Moli Energy ME202CJ rechargeable Li-ion batteries, each rated at 7,100 mAh capacity and 78.8 Wh of power. Onboard control box acts as both charger and output regulator and charges unit using supplied external power source. LED displays charge states and power availability. Portable solution is suited for stock traders, warehouse inventory clerks, tablet users, and surveyors.

Philadelphia Scientific
Montgomeryville, PA 18936
Jan 12, 2006 Offering alternative to replacement, Water Injector(TM) Systems used with industrial batteries can be sent back to company for refurbishing. Reconditioning Service provides thorough washing of Water Injectors and ¼ turn adapters, removal of old tubing and installation of new connecting tubing, quality control testing, and replacement of any imperfect parts.

Flow-Rite Controls
Byron Center, MI 49315
Apr 21, 2005 Millennium SPW(TM) DC watering cart is constructed of polyethylene plastic and carries up to 25 gallons of water. It has 9 ft supply hose with quick coupler, flow indicator, 12 Vdc voltmeter, and on-board battery with charger to power cart's variable speed pump. Refill hole with screw top includes cover to keep out particles. Compatible with de-ionized water, cart is targeted for use with batteries equipped with Millennium single point watering systems.