3M Company / Electronic Products Division
Austin, TX 78769
May 29, 2008 Suited for use by power utilities and industrial contractors, 3M Cold Shrink Branch Splice QS-2001B facilitates process of making wye splice configuration on electrical power cables rated up to 15 kV. It accepts all conductor sizes from No. 2 AWG through 500 kcmil and accommodates main feeder cable runs and taps of 350-500 kcmil conductors. Conductor sizes from No. 2 AWG through 250 kcmil are also accommodated with adapter applied to increase cable OD.

3M Company / Electronic Products Division
Austin, TX 78769
May 29, 2008 Able to work with tape shield, UniShield(TM), wire shield, and longitudinally corrugated cable, 3M Cold Shrink Splice Kit QS-III 5545A provides everything necessary for splicing 46 kV solid dielectric power cables with conductor sizes from 4/0 AWG to 1,000 kcmil. Splice can be used with standard copper or aluminum inline compression (crimp type) connectors. While cold shrink splice body is one-piece molded design made of silicone rubbers, cold shrink jacketing is made of EPDM rubber.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
May 07, 2008 Featuring temperature rating of 200°C, D-200 MiniSeal Crimp Splices combine nickel-plated copper crimp barrel with separate, heat-shrinkable, transparent sealing sleeve that provides strain relief and environmental protection. They are available for wire range from 26-12 AWG and can be used to seal and protect high-temperature-rated wires with Teflon insulation, such as RCW and BMS13-60 nickel-plated wires. Termination is with standard AD-1377 crimp tool.

Panduit Corp.
Tinley Park, IL 60477 3091
Sep 18, 2007 Comprised of 10 parts, PAN-LUG(TM) Copper Compression Parallel Splices provide safe and reliable terminations of 278 conductor combinations. Products are approved with dieless crimping tools and feature industry-recognized color coding and part numbering for visual verification in demanding low light conditions. Design minimizes inventory requirements by delivering installation flexibility.

ETCO Incorporated
Warwick, RI 02888 1501
Jun 19, 2007 Designed with large surface contact area, Flat-Snap(TM) Splice can rapidly mate and unmate without force or performance degradation, and cannot pull apart or vibrate loose under adverse conditions. Unisex design facilitates assembly, inventory, and repairs, and prevents accidental disconnection. Offered in 0.012-0.020 in. thick brass, splice can be modified to OEM requirements as posi-loc terminal and supplied as insulated connector.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 13, 2007 Designed as all-in-one splice, Raychem Cold Applied Shrinkable Joint (CSJA) suits medium voltage polymeric cable applications to 28 kV. Major elements - stress control, insulation, shielding, and re-jacketing sleeve - are pre-expanded on one holdout. Construction is based on silicone rubber joint body, and electrical stress control is provided by factory-molded stress cones and Faraday cage. Kits are available without connector or with copper ShearBolt connector.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 19, 2007 Rated up to 35 kV, UTILUX copper compression terminals and splices install with industry-standard tooling and are color-coded. They are made from seamless ETP copper and precision heat-treat tempered. Available in 1- and 2-hole versions, terminals are compatible with cable from 6 AWG to 1,000 MCM and accommodate termination with compact, compressed, or stranded copper conductors. Splices have same range and accommodate concentric, compact, or stranded copper conductors.

Cablofil Inc.
Mascoutah, IL 62258
Apr 28, 2006 FASLOCK splices provide expedient means with which to create sweeps and bends in wire cable tray. For complex installations, built-in locking tabs are bent with standard pair of pliers to secure splice in place. FASLOCK S splice is designed for use with trays from 100-200 mm wide, while FASLOCK XL splice suits 300-600 mm wide trays. Both sizes are available with Electrozinc, Dacroment, Black, Custom Painted, and 316L Stainless Steel finishes.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 24, 2006 Able to be terminated with standard tooling, PIDG 16-14 AWG heavy-duty splice accommodates railroad signal wires up to .250 in. thick and allows for one-step installation. In-line electrical wire splice, designed to accept insulation diameters associated with railroad signal wire, helps installers avoid improperly modifying wire to fit into smaller splicing products. Crimping is accomplished with PIDG splice crimp tooling in 12-10 AWG dies.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 14, 2006 Color-Keyed® Cast Copper Reducing Splices offer constant outer diameter that enables crimping of both ends with same tool or die, and facilitates insulation with clear heat-shrink wrap or watertight clamshell covers. Constructed of tin-plated, sand-cast copper for conductivity and corrosion resistance, splices include chamfered barrel to facilitate wire insertion. Applications include telecommunications, industrial MRO, and commercial contracting.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Feb 06, 2006 ShearBolt range-taking mechanical connectors, suited for splicing power cables to 35 kV, uses shear head bolts that connect splice to cable and enable connectors to control applied torque for proper results. Other features include grooved inside surface, solid center stop, and chamfered cable entry. Product is offered in 3 sizes that accommodate aluminum and copper conductors from 2 AWG compact stranded up to 1,000 kcmil standard stranded class B.

Thomas & Betts Corp.
Memphis, TN 38125
Dec 01, 2005 Sta-Kon Sta-Org(TM) Terminal and Splice Organizer Kit contains vinyl ring terminals in 12-10 AWG and 18-14 AWG sizes, vinyl butt splices in 12-10 AWG and 18-14 AWG sizes, and vinyl fork terminals in 12-10 AWG and 18-14 sizes. Measuring 6½ in. high x 3 in. in diameter, nylon drawer case features 6 clear lidded canisters and hardware to mount it on bench.

Thomas & Betts Corp.
Memphis, TN 38125
Sep 27, 2005 Tin-plated copper Sta-Kon® Parallel Splices are available for wires ranging from 22 AWG to 500 MCM. Corrosion-resistant connectors feature chamfered ends that facilitate insertion of single or multi-strand wires and eliminate wire strand hang-up. Sta-Kon Parallel Splices meet UL and CSA requirements and provide connection solution for wide range of OEM, utility, and communications applications.

FCI/Burndy Products
Manchester, NH 03108
Aug 18, 2005 UNITAPâ„¢ MOLEâ„¢ In-Line Splice/Reducer is made with specialized material that forms watertight connection and withstands abrasions that may occur in direct burial situations. Units are dual-rated for copper and aluminum applications, and are covered in clear Plastisol, eliminating need for taping during installation. All are pre-filled with oxide inhibitor, and are contaminant-free due to solid end caps.

Cablofil Inc.
Mascoutah, IL 62258
May 26, 2005 Faslock Splice facilitates fabrication of bends and sweeps within wire cable tray installation. Locking tabs secure tray using pliers, eliminating need for bolt and nut connections. Splice works with any depth wire cable tray in widths from 12–24 in. It is available in pre-galvanized, Dacromet, 316 stainless steel, black, and other painted finishes to meet demands of any application.

STAPLA Ultrasonics Corp.
Wilmington, MA 01887 1014
Dec 03, 2004 With ±0.01 mm repeatability, MATRIX incorporates digital controller, ultrasonic welder, and support system. Modular weld head offers 100 mm of clearance underneath transducer assembly to provide room to locate weld points, while nodal support system enables system to eliminate deflection of transducer assembly for uniform weld pattern. Measuring 20 x 9 x 10 in., product measures force applied to work pieces by load cell integrated into anvil assembly.

ETCO Incorporated
Warwick, RI 02888 1501
Feb 20, 2004 Made from nickel-plated steel, tinned brass, and brass, U-Band and Autoband Splices make in-line connections and butt splices with solid/stranded wires using automatic applicators. Dimples, serrations, and ribs increase holding force between wire and wire ear, and products improve electrical performance by mechanically disrupting oxides during crimping. They come in sizes for combined wire and splice cross-sections from 200–12,800 circular mills.

FCI/Burndy Products
Manchester, NH 03108
Feb 17, 2004 QIKSLEEVEâ„¢ features all-aluminum, open design that allows visual inspection, does not trap water, and eliminates corrosion issues due to dissimilar metals. Anti-reverse clip assists in initial installation of connector, while visual indicator verifies installation. Field re-adjustment capability helps eliminate potential of scrapping incorrectly applied splices. QIKSLEEVE meets ANSI C119.4 Standard and heavy-duty AA high temperature current ratings.

FCI/Burndy Products
Manchester, NH 03108
Oct 16, 2003 HYREDUCER and HYSPLICE Kits provide in-line reduction or splice of 2 conductors. They are pre-packaged with connector and length of heavy-duty black or clear heat shrink tubing that has passed Telcordia GR-347-CORE Abrasion and Cut Test. Inspection holes in connectors ensure conductor has been fully inserted. All connectors are UL listed.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 18, 2003 Raychemâ„¢ DuraSealâ„¢ heat-shrinkable splices and terminals insulate and protect electrical connections from mechanical abuse, wire pull-out, and abrasion. Impact-resistant products also serve as wire strain relief and resist water, salt spray, and debris. Configurations include butt splices; fork, ring, push-on, and bullet terminals; tabs; and pins. Dual-wall, adhesive-lined nylon insulation shrinks at 2:1 ratio and is color coded to identify wire size.