Caplugs
Buffalo, NY 14207
Apr 16, 2007 Manufactured in red low-density polyethylene, PDH Series of hydraulic block plugs feature straight threads with Allen wrench drive socket, making them suitable for flat-faced O-ring hydraulic fittings. PDH Series is offered as alternative to using metal plugs.

Stewart Connector
Glen Rock, PA 17327
Jan 19, 2007 Able to be specified for use in premise wiring systems and 10GBASE-T applications, SS-60300 Series has internal compensation and meets/exceeds 500 MHz Cat 6a requirements. Design integrates capacitive and inductive compensation on flexible circuit board that attaches directly to tips of jacks' contacts, canceling NEXT crosstalk introduced to jack from plug. FCC- and RoHS-compliant, vertical or right-angle products come in shielded and unshielded versions.

Pomona Electronics
Pomona, CA 91766 3835
Dec 20, 2006 Designed for accelerated panel construction and optimal conductivity, IEC 1010, 4 mm Banana Jacks for Sheathed Plugs are available with threaded studs, solder tabs, and threaded studs with hexagonal nuts. Jacks feature gold-plated nickel pins (nickel-plated brass for Part No. 72930) to promote connectivity and polyamide bodies for durability. Packaged in quantities of 10 per color, 1.34 in. long jacks are rated 1,000 V Cat III, 36 A max, with 30 Ncm max screwing torque.

Bel Fuse, Inc.
Jersey City, NJ 07302 4419
Dec 01, 2006 Suited for networking and computing applications, ARJ45 Series consists of cable-mounted plug and single-port, PCB-mounted jack, engineered to meet proposed Category 7a performance parameters of up to 1,000 MHz. Units are manufactured of UL94-VO plastics and provided with gold-plated contacts. Voltage range is 150 Vac and current rating is 1.5 A at 25°C. Connectors offer replacement for closed-loop InfiniBand®, Fiber Channel, EyeMAX®, SAS, PCI Express®, and microTCA applications.

Switchcraft, Inc.
Chicago, IL 60630
Nov 07, 2006 Miniature, Right Angle, Locking Power Jack and Plug system securely locks plug and jack together by utilizing keyed plugs that slide into slots on power jack. Once connected, hand twist secures plug. Designed to virtually eliminate accidental plug-to-jack decoupling, system is available in .080 and .100 in. pin sizes in PC, Surface, and Hybrid mount configurations.

Pomona Electronics
Pomona, CA 91766 3835
Sep 20, 2006 Available in red and black, 5-Way Alligator to Sheathed Right Angle clips are designed to facilitate process of piercing wire insulation to contact inner conductor for measurement. They include bed of nails and single needle tip to pierce wire from 19-26 AWG. Black and red clips are available separately as part numbers 6483-48-0 and 6483-48-2, respectively, or as kit containing one of each (part number 6483-48-02).

Cal Test Electronics, Inc.
Yorba Linda, CA 92887
Jun 28, 2006 Providing way for users to repair test leads or build custom patch cords, 4 mm FlexPlug(TM) Model CT3276-# allows for solderless wire connection using setscrew attachment method. Non-sheathed unit is rated at 36 A and 33 Vac/70 Vdc per IEC61010-031, although it can be used up to 1,200 Vac/dc if not handheld. Fully compliant with RoHS specification, plug comes in black, red, yellow, green, blue, and white.

Cal Test Electronics
Yorba Linda, CA 92887-4604
Jan 06, 2006 Extra-large Insulated Alligator Clip (Elephant Clip(TM)), Model CT3251-#, is available in 10 colors and accommodates flat, hexagonal, or round wires as small as 0.010 in. Suited for electrical, automotive, industrial, and electronics applications, it features 0.58 in. wide body with ergonomic finger stops. Double-insulated clip is IEC61010-031 rated to 1,000 V CAT III and 600 V CAT IV. RoHS-compliant product, rated to 36 A, has 4 mm safety banana jack connection.

Greenwood Electronic Components Ltd
Mortimer, Reading, Berkshire RG7 3UD  United Kingdom
Dec 05, 2005 Separable circuit board jack, Trompeter 75 Ohm Model UCBJSE20F sends high-frequency signals directly from edge of PCB through motherboard into coax cable. Two-piece design consists of edge-mounted connector mounted to daughter board, and BNC body mounted over hole in motherboard. Edge mounted connector can be mated and de-mated through hole, allowing hot-swap interconnections without removing cable from motherboard. Return loss values are better than -25 dB up through 3 GHz.

Cal Test Electronics
Yorba Linda, CA 92887-4604
Aug 11, 2005 QuickConnect™ Models CT3249 and CT3250 are standard and sheathed 4 mm DIY plugs, respectively. Both have wire conductor capability of up to 2.5 mm² and 3.9 mm for jacket diameter. When used with rated lead wire, sheathed version meets EEC 61010-031 to 600 V CAT II. Offered in 6 colors, both units contain spring-loaded clamp that securely grips both wire's conductor and outer jacket. They carry CE mark and are compatible with RoHS directive.

Pomona Electronics
Pomona, CA 91766 3835
Jun 08, 2005 Designed to simplify transportation diagnostics, Insulation Piercing Clip Sets are offered in 3–24 in. sizes for connecting to sensor leads, controls leads, and circuit wires in congested or hard-to-reach places. Clips, available attached to test leads, attached to probe tip, and in test clip sets, also come in pre-configured accessory kit for automotive applications. Products are suited for automotive, marine, and aviation applications.

J. W. Winco, Inc.
New Berlin, WI 53151
May 12, 2005 Hexagon Socket Threaded Pipe Plugs are fashioned from zinc-plated steel with yellow passivated finish and are ultrasonically checked. With max heat resistance of 250°F, NBR synthetic rubber seal is retained in radial undercut in mating face, preventing it from dropping out or protruding when plug is tightened. Plugs are available in metric pipe thread and BSPP parallel threads.

Cal Test Electronics
Yorba Linda, CA 92887-4604
May 04, 2005 General-purpose MiniPro™ series test clips, suited for circuit and basic test interconnections, feature smooth, soft touch actuation and gold-plated beryllium copper hooks. Offered in 10 colors, series features secure, snap-lock assembly that withstands heavy use. EU- and RoHS-compliant products are available individually, with lead wires, or in 10-piece kit.

Pomona Electronic
Everett, WA 98204
Apr 06, 2005 Designed to connect component test leads, terminals, and integrated circuit leads, Grabber® and Minigrabber® clips connect precisely and securely to facilitate testing. They are offered in variety of sizes, tips, and configurations. Available types include Minigrabbers No. 4723 and 4555, rotating Micrograbbers No. 5790, 5929, and 5930; and Micro SMD Grabbers No. 6490 and 6311 for connections in tight spaces, such as electronics.

Waytek Inc.
Chanhassen, MN 55317
Feb 24, 2005 Models 25R and 25B are nickel silver test clips with 20° offset jaw that guards against shorting, and single piercing needle to penetrate insulation. Units are suited for testing integrity of electrical circuits, electronic equipment, prototypes, and electrical continuity.

CUI, Inc.
Beaverton, OR 97005
Dec 13, 2004 Series RCJ-01X-SMT is housed in metal body with insulator material made from PA66 high-temperature plastic, making units suitable for IR reflow mounting. Right-angle, surface mount connectors withstand potential of 500 Vrms 50/60 Hz applied between mutually-insulated metal parts for 1 minute. Insulation resistance is 100 Mohm, while contact resistance is 30 mohm max at 100 mA. Connectors operate within temperature range of -25 to 85°C.

Cal Test Electronics
Yorba Linda, CA 92887-4604
Nov 09, 2004 Solderless, 4mm Safety Banana Plugs, Models CT3201 and CT3203, help protect technician and test equipment. Consisting of 5 parts, Model CT3201 features protective sheath that retracts when connecting plug. It can be rated to IEC61010-031, 600 V CATII, dependent on wire, with max current of 36 A. Made of up 3 parts, Right-Angle Sheathed Model CT3203 provides standard connector for DMMs. It can be rated to IEC61010-031, 1,000 V CATIII, with max current of 20 A, dependent on wire.

Keystone Electronics Corp.
Astoria, NY 11105
Dec 15, 2003 PC Automotive Mini-Blade Fuse Clips feature vertical design to hold fuses in place securely even after multiple insertions. Made from 0.016 nickel-plated brass, units withstand shock and vibration. Voltage rating is 500 Vac with 15 A current rating. Clips are available in bulk, thru-hole mount, and tape and reel, which is compatible with vacuum and mechanical pick-and-place assembly systems.

Interpower Corporation
Oskaloosa, IA 52577-0115
Oct 29, 2003 Interpower(TM) Danish Hospital-Grade Plug, Part No. 88010940, is rated 13 A at 250 Vac. It mates with hospital-grade socket, which is designed with slightly different shaped openings allowing only hospital plug, not standard Danish plug, to protect main circuit in specific medical settings.

Cal Test Electronics
Yorba Linda, CA 92887-4604
Aug 19, 2003 Model CT3116 DMM Kit includes 2 fused probe bodies, 2 highly-flexible silicone jacketed leads, and 2 fully-insulated alligator clips. Leads are not affected by cold weather or hot soldering iron. Probes feature 4 mm contact tip and utilize internal ceramic fuses rated at 10 A. Alligator clips have IP2X connection covers which, when plugged into fused probes, maintain overall safety. All components are compliant with IEC61010-031 International Safety Specification.