Electri-Flex Co.
Roselle, IL 60172 1994
Sep 30, 2008 Comprised of nylon conduit, connectors, and accessories, Corrlok® System suits passenger rail vehicle wiring, industrial control equipment, robots, and machine tool applications. Available in CL, CLR, CLL and CLFR conduits, Corrlok is lightweight, liquidtight, and withstands tough environments. One-piece connectors come in straight and angled, flanged, and threaded models. Mounting brackets, reducers, and specialty connectors including metric and PG threads are also available.

Murrplastik
Doylestown, PA 18901
Sep 15, 2008 Designed to snap into panels 1.5-2 mm thick and rated for use between -30 to +90°C, Round KDP/R Cable Entry Plate comes pre-punched with 1 hole for each cable or pneumatic hose to be inserted. Once cable is fed through, slight tug in opposite direction sets strain relief for cable. If cable is removed at later time, hole can be completely sealed off using strain relief indicator. Unit meets both RoHS standards and UL class VO for fire protection.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Aug 11, 2008 Available in ½-4 in. sizes, Raintight 3-piece, self-aligning conduit couplings join 2 lengths of threaded rigid or IMC conduit. Units feature malleable iron construction and zinc electroplating, with mating components to which threaded conduits are securely joined in telescoping fashion. Oversized O-ring prevents water entry and self-aligning feature on UL-listed couplings allows smooth wire pulling from conduit to conduit.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Jun 10, 2008 UL recognized for use within listed assemblies, USL-120 is provided with set screw that secures conduit without damaging conductors. Flexible Steel Conduit Connector can be used with assemblies including office partitions, showcases, merchandising displays, lighting fixtures, range tops, and other appliances.

Richco, Inc.
Morton Grove, IL 60680
May 09, 2008 Model FTH-31 features clip that accepts many different size ties and allows ties to be mounted in 2 directions. Plastic housing with assembled metal clip provides strong retention to panel, and holder accepts panels from 0.03-0.12 in. RoHS-compliant product is available in V2 Nylon 6/6, UL94 V0 Nylon 6/6, and High-Temperature Nylon 4/6.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
May 08, 2008 Flexel(TM) EMT Flexible Fittings come in 1¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for indoors and dry locations and are UL Listed and CSA Certified.

Remke Industries, Inc.
Wheeling, IL 60090 6039
Apr 18, 2008 Rated IP68 and NEMA 4X, Stainless Steel Liquid Tight Connectors are available in 90° and 3/8-1 in. sizes. Units feature nylon insulated throat, Viton O-ring, NPT threads, and 304 stainless steel body and ferrule. Suited for wet or dry locations, connectors seal against dust, dirt, oil, water, and chemicals. Applications include food and beverage processing, pulp and paper mills, wastewater treatment, electrical motors, and machine tool building.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Apr 01, 2008 Model 4157-DC is duplex AC/MC connector with cable range from 14/2 to 10/3 metal clad cable and ¾ in. electrical metallic tubing (EMT). Couplings' internal dimension allows conductors to pass through to EMT conduit without damaging conductor insulation. Transition fitting is suited for new construction and retrofit applications in schools and commercial buildings.

Richco, Inc.
Morton Grove, IL 60680
Feb 26, 2008 Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.

Richco, Inc.
Morton Grove, IL 60680
Feb 26, 2008 RoHS-compliant SHR-C Series, comprised of snap-fit and screw-mount base versions, lock securely and can be reopened for maintenance. Able to hold SHR-20 and SHR-25 slit harness wrap sizes, adjustable clip is designed to accelerate installation and features internal ribs that hold harness wrap firmly.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Feb 01, 2008 Protected from water, dust, oil, grease, fumes, and other hostile contaminants, liquidtight ST Series is available pre-assembled with integrated KO sealing ring. Cable and conduit connectors are made from bar stock steel or malleable iron with small turning radius for installation in tight spaces. Offered in 3/8-5 in. sizes in straight, 45°, and 90° configurations, connectors feature crimpable ferrule to secure mechanical grounding and deep ferrule threads that prevent pullout.

EGS Electrical Group
Skokie, IL 60077
Jun 05, 2007 Type AXB expansion fitting suits elongated conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. Used to permit linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection, AXB incorporates internal bonding jumper to facilitate installation and maintenance. No disassembly is required during installation, and outer casing slides open to view jumper for no-tools field inspections.

Heyco Products
Toms River, NJ 08753
May 21, 2007 Characterized by precision-molded, 2-piece mechanism with attached integral locking closure, Flexicon Conduit Mounting Clips provide secure means of mounting Flexicon FPAS or FPI liquid-tight conduit, cables, and tubing into vertical or horizontal indoor/outdoor configurations. Constructed from polyamide 6/6 Nylon, units accommodate .25-2 in. conduit and tubing and are resistant to salt water, weak acids, gasoline, oil, grease, and common solvents.

Micro Plastics, Inc.
Flippin, AR 72634
Mar 07, 2007 Molded in black or natural nylon 6/6, Combo Cradle Mount offers chemical resistance and optimal wear properties. Large base assures stable mounting surface and can be secured with screw or rivet. Part can be used with standard or hook-and-loop wire ties to route bundles of wires, cables, or tubing.

Ultra-tec Cable Railing Systems
Carson City, NV 89701-1484
Sep 18, 2006 Attached to cables by hand, field-installed Push-Lock(TM) Fittings eliminate need for swaging equipment. Cables come with tensioner on one end and bare cable on other end. Installation consists of cutting cable, pushing on fittings, and tensioning cable. When installed, there are no acorn nuts or rough cable ends and separate caps to deal with. Stainless steel fittings can be used with wood or metal framed railings, indoors or outdoors. Styles are available for level runs and stairs.

Thomas & Betts Corp.
Memphis, TN 38125
Aug 23, 2006 Designed to connect metallic-cored liquidtight conduit to box or enclosure, Stainless Steel Liquidtight Conduit Connectors are available in straight, 45°, and 90° configurations in sizes to fit conduit from 3/8-2 in. Connectors in sizes 3/8-1 in. offer steel ground cone with Dura-Plate® finish, while connectors in sizes 1¼-2 in. offer brass ground cone plated with nickel. UL® Listed Ratings include 3, 3R, 4, and 4X.

Micro Plastics, Inc.
Flippin, AR 72634
Aug 08, 2006 Molded in natural nylon 6/6, releasable Push Mount Wire Clips are designed to fit panel thickness of .020-.070 in. and accommodate maximum wire bundle diameter of ¾ in. Units can be opened and closed multiple times for adding or removing wires or cables. Large contoured base assures stable mounting.

Micro Plastics, Inc.
Flippin, AR 72634
Jun 16, 2006 Adhesive-based Releasable Wire Clip has positive latch design for multiple open/close cycles used for adding or removing wires. Part is molded in natural nylon 6/6 with double coated adhesive foam tape for installation without mounting screws or holes for push mounts.

Thomas & Betts Corp.
Memphis, TN 38125
Jun 13, 2006 Able to withstand vibration and corrosive environments, Type A Liquidtight Connectors and Conduit are suited for cable carrier installation, robot assembly, automotive applications, as well as outdoor signs and lighting at more than 1,000 V. Ranging from 3/8-2 in., conduit is constructed of flexible PVC cover with woven nylon web bonded to seamless flexible PVC inner core. Ferrous connectors have nylon-insulated throat and Santoprene® sealing gasket with 316 SS retaining ring for NEMA LT seal.

Thomas & Betts Corp.
Memphis, TN 38125
Jan 16, 2006 Able to terminate portable cord and tray cables in hazardous locations, T&B® Fittings Silver Grip® TCF® Series includes aluminum and 316 stainless steel models with respective hub sizes from ½-2 in. NPT and ½-1 in. NPT. Features include tapered neoprene bushing and O-ring seal impermeable to moisture and dirt. Able to be tightened by hand, without tools, fittings employ chuck grip with mechanical pullout that exceeds applicable performance requirements.