Draka Cableteq
North Dighton, MA 02764
May 30, 2008 Featuring low-smoke and zero-halogen construction, EnergySafe Cables are suited for indoor or outdoor installations, in conduit, duct, or cable trays, or for aerial and direct burial up to 600 V. Available in standard sizes as well as reduced diameters for crowded raceways, cables meet UL and IEEE flame ratings, and are engineered for applications where safety of personnel and equipment is imperative.

Q-Tran Inc.
Bridgeport, CT 06610
May 01, 2008 Q-Wire series flexible, watertight cables are UL listed to meet Code Standard 493, sun resistant, and tin coated that can be used in direct burial applications. Rated for temperatures ranging from -20 to +90°C, and 75°C in wet locations, they can operate up to rms maximum of 600 V. Featuring 2-color outer jacket that is brown on one side to blend into bark of any tree and dark gray on other, cables are available in 8, 10, 12, and 14 AWG sizes.

ETCO Incorporated
Warwick, RI 02888 1501
Aug 14, 2007 Designed to hold standard brass blades and ground pin within polypropylene housing, Male Bridge Power Cord Assembly features crimp ears that are uniformly positioned to accept 3-wires in one step. Wires can be attached manually or by automatic equipment. Creating rigid form factor, assembly is offered in 2 sizes for 10-12 and 18-14 gauge wires. Blades are UL 1659 certified.

FCI
Etters, PA 17319
Jun 26, 2007 Composed of cable connectors, pcb connectors, and cable assemblies, Low-Profile Subscriber I/O System supports connection of signals and power for DSL subscriber accounts. Dual row signal connectors have 24 contacts on 2.00 mm pitch, power connectors have 2 contacts on 2.54 mm pitch, and pcb header measures 14 x 20 x 13 mm. Cable connector design employs 2 additional first-mate/last-break sacrificial contacts to prevent arcing to primary power contacts.

C & M Corporation
Wauregan, CT 06387 0348
Jun 20, 2007 Suited for assembly line hand tool applications, Power/Control Composite Cables contain high-flex conductors and strength members to withstand flexing and torsional bending. Duralon(TM) jacketing provides abrasion resistance and protection from oils and chemicals. Cable construction eliminates need to replace cables during life of equipment and prevents production downtime due to cable failure.

Quail Electronics
Livermore, CA 94550
May 11, 2007 Available in shielded (Part No. 2710.079) and unshielded versions (Part No. 2700.072), Piggyback Cords allow users to tap into AC outlets and power equipment while maintaining usable power outlet. RoHS UL and C-UL approved cords come with standard IEC-320-C13 connector and 5-15 Piggyback Plug. Additional and custom configurations are available.

Lapp USA
Florham Park, NJ 07932
Apr 16, 2007 Complying with NEC Hazardous Area Standard for flexible cables for use in Class 1, Division 1 locations, OLFLEX® POWER CLASS 1 DIV 1 power and control cable also conforms to RoHS requirements and is UL/CSA STOW hard service cordage rated. Oil and crush-resistant cable with exposed run approval is a multiconductor, 600 V, 90 oC, UL Type TC-ER, c(UL) Type TC/CIC that suits applications in all electrical equipment in dry, damp, and wet conditions.

Rockwell Automation
Milwaukee, WI 53204
Feb 13, 2007 With ArmorConnect(TM) Power Media, manufacturers can establish secure connections to ArmorStart® Distributor Motor Controller, which offers plug-and-play design that eliminates need for specialized labor and tools. Since manual wiring is eliminated, assembly error is avoided. Three-phase power media accessories include cordsets, patchcords, tees, reducers, and power receptacles, while control power media accessories include cordsets, patchcord cables, t-ports, and receptacles.

Belden
Richmond, IN 47375
Oct 31, 2006 Featuring TPE jackets and low temperature performance, IndustrialTuff DeviceBus 1345F and 1346F Cables offer resistance to weld splatter, oil, solvents, and abrasion in harsh industrial environments. Units combine data and power functionality in single cable and can be used for either trunk or drop applications, depending on system speed and overall end-to-end distance. Cables are RoHS compliant and CE approved, as well as fully compliant with ODVA specifications.

Belden
Richmond, IN 47375
Oct 26, 2006 Suited for use in ODVA DeviceNet(TM) industrial networking environments, IndustrialTuff® DeviceBus® cables (Product No. 1345F and 1346F) offer data and power functionality in single cable. Cables feature red TPE jackets that designate DeviceNet safety and are resistant to weld splatter, oil, solvent, and abrasion in harsh industrial environments. Designated as Class 1 (600 V) or Class 2 (300 V), products can be used for trunk or drop applications.

Interpower Corporation
Oskaloosa, IA 52577-0115
Jun 16, 2006 Molded Interpower(TM) Swiss 16 A power cords and cordsets are for equipment rated up 16 A with service at 250 Vac. Products are available with Swiss 16 A plug and 1.50 mm² HAR cable in 2.5 m length. Power cord has stripped conductors while cordset includes one of three angled IEC 60320 C19 connectors. Units are SEV, Electrosuisse SEV 1011:98, CH-Type 23, and Standard-Sheet SEV 5934-2 approved.

Interpower Corporation
Oskaloosa, IA 52577-0115
Mar 29, 2006 Approved to Danish Medical Standard DK-2-8A, Interpower(TM) Danish Medical power cords and cordsets are available from stock with 0.75 and 1.00 mm² HAR cable in 2.0 and 2.5 m lengths, respectively. Molded products are RoHS-compliant and suited for medical equipment rated up 10 A with service at 250 Vac. While power cord has Danish Medical plug, HAR cable, and stripped conductors, cordset has Danish Medical plug, HAR cable, and one of 5 angled IEC 60320 C13 connectors.

Northwire, Inc.
Osceola, WI 54020
Oct 07, 2005 EnduroFLEX® ERP Cable is compliant with NPFA-79-2002, allowing exposed power trunk and drop cables on machinery up to 40 A. Cable is also TC/Exposed-run and STOOW Service-rated. Available in 3- and 4-conductor models and in gauges from 18-10 AWG, product meets UL1277 crush and impact requirements, and passes -40°C cold bend tests. It also meets UL vertical tray and CSA FT-4 flame resistance, as well as Oil I and II resistance standards.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division
Milford, CT 06460
Jun 29, 2005 Designed for raised floor commercial applications, CONNEXION Zone Distribution System routes power and data wherever needed to facilitate relocations and future upgrades. Factory-assembled 20 A modular system brings power and data services to point of use with zone distribution box that can expand from 4–16 circuits to meet changing infrastructure requirements. Installed by 3-person crew in one day, product accommodates 15,000 ft² work space.

C & M Corporation
Wauregan, CT 06387 0348
May 11, 2005 DuraFloat Cable relies on foam core extrusion capabilities to achieve precise cable buoyancy requirements. It is flexible, UV-stable, and abrasion-resistant and may be fitted with choice of jackets to achieve resistance to various chemicals including acids, salt water, oil, and gasoline. Cable is suited for powering and controlling robotic cleaning systems in swimming pools and aquarium facilities as well as marine applications and submersible environmental pumping systems.

Southwire Co.
Carrollton, GA 30119
Feb 04, 2005 SOLONONâ„¢ cables feature non-halogen jackets that protect cable core and are resistant to burning. Product minimizes personal risk and indirect fire damage from smoke and halogen gases. Minimal mechanical water absorption results in optimal moisture barrier for use in direct burial or underground duct applications.

Igus, Inc.
East Providence, RI 02914 0349
Dec 31, 2004 Chainflex® CF9 and CF10 continuous-flex cables are equipped with bare copper conductors and are resistant to oil, frost, and exceptionally low/high temperatures. Insulation and jacket are flexible, anti-abrasive thermoplastic polyester containing fire retardants. Non-porous outer jacket repels oil and cutting fluids. CF9 comes in multi-conductor layouts from 24–2 AWG, while CF10 is offered from 26–12 AWG. Temperature resistance for both cables is -32 to +212°F.

Interpower Corporation
Oskaloosa, IA 52577-0115
Aug 30, 2004 Angled NEMA 5–15 power cords are suited for equipment rated up to 15 A with service at 125 Vac. UL- and CSA-approved products are available with 3 x 18, 3 x 16, and 3 x 14 AWG cable in stock lengths of 6, 8, and 10 ft. Cords are configured with one of 8 different angles of NEMA 5–15 plug and terminated with bare conductor wires. Custom lengths, special packaging, and color options are available.

Interpower Corporation
Oskaloosa, IA 52577-0115
Jul 06, 2004 Argentina cordsets are for equipment rated up to 10 A with service at 250 Vac. IRAM/SCI&M-approved cordsets are available with 1.00 mm² cable in stock lengths of 2.5 m. Cordsets are configured with Argentina plug and terminated with choice of 5 IEC 60320 C13 connectors, including left, right, up, down, and straight, enabling designers to reduce clearance space required behind or under equipment.

Interpower Corporation
Oskaloosa, IA 52577-0115
May 14, 2004 United Kingdom/Ireland Power Cords are intended for equipment rated from 3–13 A with service at 250 Vac. They are ASTA approved and available with 3, 5, 10, or 13 Amp BS 1362 fuse. Cords come with 0.75, 1.00, or 1.50 mm² HAR cable in stock lengths of 2.5 meters. Applications include equipment designed for use in United Kingdom, Ireland, Singapore, and other international areas using BS1363 style plug.