Quail Electronics
Livermore, CA 94550
Oct 29, 2009 Designed for dimly lit environments, 0310.120LT lets specialists in medical field know if connection is on. It consists of standard NEMA 5-15P Hospital Grade Green Dot Plug configuration with internal LED that will light up when cord is plugged into power source. This 10 ft power cord uses 18/3 AWG cable with Grey SJT jacket, and equipment end is IEC-60320-C13 Clear. Featuring UL and C-UL approvals, cord carries 10 A, 125 V rating.

Belden
Richmond, IN 47375
Oct 07, 2009 To ensure optimal performance in extreme or mission-critical environments, Industrial Ethernet Cordsets and Patch Cords have individual insulated conductors bonded together along longitudinal axis for uniform conductor-to-conductor spacing. Cables are also chemical- and temperature-resistant and incorporate rugged RJ45 or over-molded M12, IP67-rated industrial connectors.

Coleman Cable, Inc.
Waukegan, IL 60085
Sep 03, 2009 Disaster Recovery and Restoration Cords allow emergency response teams and contractors to convert dryer, range, or generator outlets into usable power for large equipment or temporary power distribution boxes during disaster clean-up, rebuilds, and restoration projects. NEMA 14-30P (30 A dryer outlet), NEMA 14-50P (50 A range outlet), and NEMA L14-30P (30 A generator) cords offer either NEMA L14-30R (receptacle) or 50 A twist receptacle to energize temporary power distribution boxes.

Siemon Co., The
Watertown, CT 06795
Jun 26, 2009 Available in both UTP and shielded configurations, 6 A Z-MAX Patch Cords feature RJ-45 Smart-Plug design, which integrates PCB into every plug, offering signal tuning capabilities. Zero-Cross(TM) termination method eliminates split pair, pair-crossing, and pair untwisting. To maintain pair twist to point of contact, cable conductors are terminated to IDC contacts at rear of plug. Double-ended stranded patch cords and single and double-ended solid cords are available.

Binder-USA, LP
Camarillo, CA 93012
May 05, 2009 Offered with Series 620 and Series 720 family of plastic snap-in connectors, overmolded cordsets allow for quick connect and disconnect of mated pair. When properly mated, they are IP 67-rated, protecting connection from ingress of liquids and debris. Each cordset is constructed with plastic shell molded onto 2 m PUR cable. Male and female cordsets are available with gold-plated contacts ranging from 3-12 pins/connector, with custom cable lengths also available.

MEGA Electronics, Inc.
New Brunswick, NJ 08901
Apr 10, 2009 Rated 10 A/125 V, Model 1940000003 features certification by Bureau of Standards, Metrology, and Inspection of the Ministry of Economic Affairs in Taiwan. Detachable cordset has N5/15 and C13 connector as well as 1,677 mm of VCTF3 x 1.25 mm cable. Incorporating BSMI-approved cordset into equipment accelerates approval process and grants quicker access to Taiwanese market for all electric and electronic equipment.

Coleman Cable, Inc.
Waukegan, IL 60085
Feb 20, 2009 Providing safe method to extend range of welding equipment Welder Extension Cords are available in 25 ft lengths and deliver 40 A at 250 V (10,000 W). They feature STW jacket with molded ends for heavy-duty performance and lighted receptacle for convenience and safety. Cords are suited for new commercial construction, MRO industrial and general welding applications.

Turck USA
Minneapolis, MN 55441
Feb 12, 2009 Including IEC 11801:2002 Cat 5 and TIA 568B: 2001 Cat 5e compliant cable, 4-wire PROFINET cordsets connect to BL67 Ethernet gateways for PROFINET, which can be connected to up to 32 I/O modules per gateway. Available with color-coded field wireables to convert hard wiring to quick disconnect, units are offered with M12 Ethernet D-coded and RJ45 connector options.

Belden
Richmond, IN 47375
Feb 06, 2009 Belden 10GX® Cables utilize Bonded-Pair technology, where cable's individual conductors are bonded along their longitudinal axis for uniform spacing within each twisted pair, allowing them to maintain signal integrity and consistent transmission performance throughout stresses of installation and maintenance. In addition, they incorporate central spline that separates and holds twisted pairs firmly in position at uniform distance from each other, improving crosstalk performance.

Alpha Source
Milwaukee, WI 53225
Jan 22, 2009 Designed to make unplugging safer for healthcare professionals, RingPlug is built with 6 o'clock and 9 o'clock angle configurations. It features ergonomic design that minimizes cord damage and emphasizes safer way to unplug cords. Cord is UL approved for hospital use on equipment such as defibrillators.

Turck USA
Minneapolis, MN 55441
Nov 19, 2008 M16 powerfast(TM) line includes 2-, 3- and 4-pin connectors and tees that provide up to 18 A in compact form factor for machine power distribution and motor control. Cordsets are offered with Tray Rated, exposed run PVC flexlife cable, and IP67 connectors are rated for 600 V. Tees are available with simple connectors or branches. Compliant with NFPA 79, products offer male or female options, straight connectors, standard and custom lengths, and pigtails or extensions.

Heyco Products
Toms River, NJ 08753
Aug 19, 2008 Available in variety of cable diameters and mounting hole sizes, Snap-In Cordgrips provide cord and cable strain relief in limited clearance applications inside electrical cabinets and product housings. Cordgrips toollessly lock into cabinet or product housing. Constructed from polyamide 6/6 nylon, units suit any application that utilizes flexible power cord in non-liquid tight environment or where short assembly time is important to OEM manufacturers.

ifm efector, Inc.
Exton, PA 19341
Jul 17, 2008 Metal Face sensors feature weld field-immune electronics, weld slag-resistant coating, and stainless steel construction that withstands damage from impacts caused by part-loading in manufacturing cells. For power connection, there are 2 families of M12 Micro DC cordsets that feature cable material rated for elevated temperatures and coupling nuts with weld slag-resistant coating. Available cable lengths are 2, 5 and 10 m.

Binder-USA
Camarillo, CA 93012
Jun 24, 2008 Featuring industry-standard M8 threaded locking system that assures reliable operations in harsh environments, M8 to M8 dual patchcord is used to make connection between female and 2 male M8 connectors in industrial network. Male M8 connector has 4 contacts, which connect to 3 contacts in each of female connectors. PUR-jacketed cable comes in standard length of 0.3, 0.6, and 1 m. When properly mated, connections meet IP67 ratings.

Binder-USA
Camarillo, CA 93012
Apr 16, 2008 Designed for medical and industrial applications with limited space, Series 702 M9 molded connectors are manufactured with IP67 environmental protection and 360° EMI shielding. Molded with PUR material for protection from harsh environments, preassembled cordsets are designed to improve strain relief and are available in lengths of 2 and 5 m.

Coleman Cable, Inc.
Waukegan, IL 60085
Mar 04, 2008 Available in 6 and 50 ft lengths with yellow jacket for safety and visibility, 12-gauge STW 600 V Cord Runner(TM) is suitable for workshops and job-sites that involve multiple tasks running in different areas. Each outlet has power indicator light to let user know when power is on. Outlet covers keep water and dust out, while outdoor-rated cord remains flexible even in coldest weather.

Interpower Corporation
Oskaloosa, IA 52577-0115
Jan 10, 2008 North American Hospital-Grade Cordset carries green dot that signifies it is designed and tested for grounding reliability, assembly integrity, strength, and durability in hospital and medical settings. Carrying UL and CSA approvals, product is available with NEMA 5-15 clear plug, 16/3 SJT black cable, and black or silver IEC 60320 C13 straight connector. Solution is rated for maximum of 13 A with service at 125 Vac.

Agilent Technologies, Inc
Santa Clara, CA 95051
Nov 13, 2007 Suited for oscilloscope measurements in environmental chambers and other settings with extreme temperature conditions, Model N5450A extension cable offers 2 different operational temperature ranges, depending on probe head configurations. It provides temperature range coverage of -55 to 150°C and -25 to 80°C when used with N5381A differential solder-in probe head, and E2677A differential solder-in probe head, E2678A differential socket probe head, or N5425A/26A ZIF tip, respectively.

Lumberg, Inc.
Midlothian, VA 23113
Oct 18, 2007 Maintaining Category 5E compliance, e-FLEX(TM) industrial-grade Ethernet cordsets offer continuous flex of 10 million cycles at bend radius of 20x cable diameter. Types include IP67-rated e-FLEX Bayonet locking double-ended (male RJ45 to male RJ45), IP20-rated e-FLEX double-ended (male RJ45 to male RJ45), and IP67-rated e-FLEX Ethernet/IP double-ended (M12 male to M12 male) cordsets. Each version is available in various lengths to suit application.

TURCK, Inc.
Plymouth, MN 55441
Oct 11, 2007 Overmolded with polyurethane, Right Angle RJ45 Connectors are available with internal or external tabs. Cables come with or without shielding in 4 or 8-wire configurations and with stranded conductors. Complimenting Ethernet cabinet adapter, cordset is suited for connections in tight spaces and Ethernet panel builders.