Molex Inc.
Lisle, IL 60532-1682
Nov 18, 2009 Designed to meet 10 Gbps data rates, QSFP+ Quad Small Form-factor Pluggable Plus Solution combines EMI shielding cage, passive cable assembly, active cable assembly, optical MTP cable assembly, optical loopback, and 38-circuit SMT iPass(TM) host connector. iPass contact design provides 4 balanced differential channels featuring isolation and up to 250 cycles. Optical cables are constructed with 12-fiber 3.00 mm round cable for data center interconnect applications.

Megladon Manufacturing Group, Ltd.
Austin, TX 78758
Nov 18, 2009 Placed between OTDR and link under test, Pulse Suppression Box delivers consistent test results in network certifications. Unit serves as dead zone elimination tool as well as reference grade fiber cable that provides accurate field testing and predictable calibration. Housed in drop resistant, waterproof case, Pulse Suppression Box assemblies use Hardened Lens Contact termination process and SCRATCHGUARD technology for all major glass and connector types.

Molex Inc.
Lisle, IL 60532-1682
Nov 17, 2009 Offering copper and optical direct attach options for same system port, iPass+(TM) enables 12 channels of 10 Gbps data for up to 120 Gbps of total bandwidth. High-Speed Channel (HSC) pluggable CXP copper and optical interconnect system features unitary press-fit connector and cage assembly that provide one-step placement to host board. CXP 12X direct attach copper cables accommodate single, ganged, or stacked connector configurations in high-density requirement applications.

W. L. Gore & Associates, Inc.
Elkton,, MD 21921
Nov 13, 2009 Fully compliant with SFF-8431 Revision 4.1 specification, Chapter 3, Limiting Port Copper SFP+ Cables utilize GORE(TM) EYE-OPENER+® Conductor Technology and low loss expanded PTFE cable dielectric. Cables satisfy limiting port specification up to 7 m, without using active technology. Core/skin design of conductors provides distributed or per unit length equalization without resistor-inductor-capacitor circuitry required on connector paddle card.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
Nov 09, 2009 Designed with modified polyphenylene ether thermoplastic (mPPE), RoHS compliant UL AWM 11028 wires are available in sizes from 28-10 AWG with solid or stranded tinned copper conductors. Rated for operating temperatures to 105°C, units meet UL VW-1 flammability standards. Non-halogenated insulation contains no heavy metal pigments, allowing manufacturers to meet Waste Electrical and Electronic Equipment requirements.

AutomationDirect.com
Cumming, GA 30040-9905
Nov 06, 2009 Available in 6 lengths from 0.3-10 m, Patch Cables have right-angle M12 female plug with LED indicator on one end and axial male connector on other end. Polyurethane jacket enables use in oily and direct sunlight applications. Offered in 2, 5, and 10 m lengths, Quick Disconnect Cables include LED indicator to confirm signal presence. They have M12 right-angle female plugs and can be used with patch cables to extend distance.

Quail Electronics
Livermore, CA 94550
Oct 29, 2009 Designed for dimly lit environments, 0310.120LT lets specialists in medical field know if connection is on. It consists of standard NEMA 5-15P Hospital Grade Green Dot Plug configuration with internal LED that will light up when cord is plugged into power source. This 10 ft power cord uses 18/3 AWG cable with Grey SJT jacket, and equipment end is IEC-60320-C13 Clear. Featuring UL and C-UL approvals, cord carries 10 A, 125 V rating.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
Oct 28, 2009 Solar cables and photovoltaic (PV) wire withstand harsh environments - temperatures from -40 to +90°C, ozone and UV radiation, moisture, oil, direct burial - of solar energy applications. Available in wire range from 14-2 AWG, PV wires come in 2 versions to meet UL 4703 PV wire/TUV 2 PFG 1169 requirements or UL 4703 PV wire requirements. Solar cables, offered in 18-12 AWG sizes and conductor counts from 3-9, are available shielded or unshielded.

GOEPEL electronics LLC
Austin, TX 78759
Oct 20, 2009 SCANFLEX® 9305-BAC/RS232 Bus Access Cables, when used with multiport module SFX9305, enable test of RS232 interfaces in combination with extended JTAG/Boundary Scan operations. Cables can be plugged into each free port of module, with interface recognized and configured automatically and BAC type/number defined by user. Interface functions contain stepwise handling of protocol layers, including bidirectional data transfer, allowing users to control interface target/identify faults.

W. L. Gore & Associates Cable & Assemblies
Landenberg, PA 19350
Oct 19, 2009 Fully compliant with SFF-8431 Revision 4.1 specification, 10 meter SFP+ Copper Cable Assembly can go 3-5 m longer than other passive options. Product uses GORE(TM) EYE-OPENER+® Conductor Technology and low-loss expanded PTFE cable dielectric, which balances waveform distortion penalty and voltage modulation amplitude parameters to achieve results within specification limits set forth by SFF-8431 committee. dWDP and VMA loss are 5.60 dBe and 3.95 dBe, respectively.

Wireworks Corp.
Hillside, NJ 07205
Oct 15, 2009 Multipin-based MCAT5 network cabling system includes tails that support 6 channels of 10/100/1000BASE-T signals and equipment requiring 4 pairs/RJ45. Tails are color-coded for identification and terminated with RJ45 or etherCON connectors. Featuring double-jacketed, shielded design, system has 0.57 in. dia and weighs 14 lb/100 ft, and cable sections are available in lengths up to 250 ft. Product's G-Block rectangular connector design eliminates cross-threading/locking ring damage.

HBM, Inc.
Marlborough, MA 01752 3014
Oct 13, 2009 Featuring Transducer Electronic Data Sheet (TEDS) technology, TEDSdongle enables measurement chains to be automatically and securely recognized and configured. It allows users to read and write TEDS information to memory chip for configuring sensors and prepare them for measurement tasks. TEDS data is stored according to international IEEE standard 1451.4. TEDS-Editor software automatically recognizes TEDS memory and enables modification and configuration of sensors in laboratory or on site.

Belden
Richmond, IN 47375
Oct 13, 2009 Supporting renewable energy initiatives, Solar Cables link together solar panels found on solar farms. They come in standard lengths of 1,000 and 5,000 ft and are UL Type PV-approved (UL 4703 USE-2 Rated) for use as interconnection wiring of grounded and ungrounded photovoltaic power systems (Section 630.31). Featuring 18-8 AWG, single soft annealed tinned stranded copper conductors, cables are rated for max operating voltage of 600 or 1,000 VRMS for UL PV or 1,000 VRMS for CSA RW 90.

Belden
Richmond, IN 47375
Oct 13, 2009 Suited for use in outdoor broadcasting applications, MaxiBend cables are offered in 8 standard variants in single- and multi-mode constructions, with up to 12 fibers, and variety of special options including glass type, fiber count, and jacket color and material. Tight buffered cables feature aramid yarn strength member and sunlight-resistant polyurethane outer jacket. Resistant to abrasion, crushing, and cut-through, cables are compatible with all optical fiber connector types.

Draka Communications
Claremont, NC 08610
Oct 09, 2009 GR-20 and RUS standards compliant, ezInterconnect(TM) MDU Drop cables are offered with 3 different levels of bend insensitive fiber including BendBright, BendBright-XS, and BendBright-Elite. Drop cable is available from 1-12 fibers, gel or dry tube, is round in shape, armored, bends in any direction, and contains single tube. Offered with indoor or outdoor style connectors and with HLC Scratchguard technology, cables can be used for aerial, duct, or direct buried applications.

Belden
Richmond, IN 47375
Oct 08, 2009 Classic Design VFD Cables with Beldfoil® plus TC Braid Shield are available in 14-2 AWG and feature oversized XLPE insulation, dual shielding, and 85% braid coverage for EMI protection. Aluminum/Mylar tape shield protects against RF noise. Symmetrical Design with Spiral Copper Tape Shield versions, offered in 1-4/0 AWG, feature spirally applied dual copper tape EMI/RFI shields. All 2,000 V, UL 1277 Type TC-ER cables feature black sunlight- and oil-resistant PVC jackets.

Belden
Richmond, IN 47375
Oct 07, 2009 To ensure optimal performance in extreme or mission-critical environments, Industrial Ethernet Cordsets and Patch Cords have individual insulated conductors bonded together along longitudinal axis for uniform conductor-to-conductor spacing. Cables are also chemical- and temperature-resistant and incorporate rugged RJ45 or over-molded M12, IP67-rated industrial connectors.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Sep 28, 2009 Cables meet requirements of Chapter 12 of NFPA 79 standard and are suited for factory automation, machine manufacture, as well as industrial machinery that operates from nominal voltage of 600 V or less. Flexible and durable cables resist harsh chemicals. They are available in various construction and conductor sizes.

Belden
Richmond, IN 47375
Sep 28, 2009 Ideal for installation in data centers and office environments, Belden 3600 Pre-terminated Cabling System offers bandwidth of 280 MHz. Braided sleeve and pulling eyes provide protection when pulling and routing assemblies through overhead trays, raised floors, cabinet poke-throughs, and cable management hardware. Available in 6-cable bundles in 1 ft increments from 6-50 ft long and in 5 ft increments from 55-295 ft long, system includes CAT6+ RJ45 Modular Couplers.

Total Cable Solutions
Fremont, CA 94538
Sep 04, 2009 Single-mode macrobend/high-bend-radius patch cables utilize bend-insensitive Corning® SMF28e® XB full-spectrum, single-mode fiber that is compliant with ITU-TG.652.D and G.657.A standards. Cables are available with LC, SC, ST, or FC termination; APC or UPC polishes; and jacket thicknesses of 2 or 3 mm. Product has minimum bend radius of only 10 mm and is designed to be used in all network installs, and fits the FTTH market well.