Electrical Wire & Cable & Connectors

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices, Material Handling & Storage, Portable Tools, Test & Measuring Instruments

Klein Tools Launches New Voice-Data-Video Testers and Tools

April 29, 2011

LINCOLNSHIRE, Ill. - Klein Tools, Inc. recently announced an extension to their Voice-Data-Video (VDV) product line with the introduction of several new testers and tools dedicated to the VDV professional. Designed to Klein's highest quality professional standards, these new VDV Testers and Tools were developed for use in preparing, connecting, and testing twisted-pair and coaxial cables. This... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Starrett Introduces 4-Port Gage Multiplexer and Smart Cable for Fast, Simple Data Measurement

April 27, 2011

Two New Starrett Wire-based Devices Make Data Transfer a Snap ATHOL, MASS. - The L.S. Starrett Company, a global manufacturer of precision tools and metrology equipment and other tools, today announced its 4-Port Gage Multiplexer line and SmartCable for a fast and easy way to connect a measuring tool to a PC. Both wire-based products offer a simple plug and play set up to gather data from... Read More

Electrical Equipment & Systems, Optics & Photonics

SFP Connector System suits WiMax and LTE FTTA applications.

April 26, 2011

Featuring waterproof, dustproof, and corrosion-resistant design with metal die cast bulkhead, FullAXS provides SFP connection between remote radio and base station for telecommunications applications. Unit offers bayonet locking and provides positive mechanical feedback to inform operator when connector is fully mated. Providing duplex LC interface for mating with all LC duplex SFP transceivers,... Read More

Electrical Equipment & Systems, Material Handling & Storage

Locking Nut DC Power Jacks have panel mount design.

April 25, 2011

Suited for use in consumer electronics and electrical equipment, PJ-06xA and PJ-06xB series have center pin diameter of 2.1 or 2.5 mm and OD of 5.5 mm. Contact resistance is 30 mW max, and insulation resistance is 100 MW min @ 500 Vdc. Able to withstand 500 Vac RMS for 1 min, products have voltage rating of 20 Vdc at 5 A. Options include long... Read More

Electrical Equipment & Systems

LED Lighting Connectors feature pushbutton terminations.

April 25, 2011

CoolSplice wire connectors feature left and right independent pushbuttons that can be used with common hand tools to establish ergonomic termination. Insulation Displacement Connectors provide wire-to-wire or wire-to-flat ribbon terminations, and have symmetrical-contoured design that fits through 0.630 in. dia hole or PVC tube. Included viewing window shows whether wire is fully seated. Units... Read More

Electrical Equipment & Systems

Circular Connector tolerates harsh environmental conditions.

April 25, 2011

Model D38999 plug connector is suited for use in harsh environments in aerospace, military, motor sports, maritime, and rail industries. Insertion molding of housing parts results in permanent connection, at molecular level, between individual components of plug connector, injection molded material, and cable sheathing. Protected from moisture, product is available in any shape or color, or... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Super-fast Plug Connectors for the New USB3.0 Standard

April 25, 2011

Munich, - Yamaichi Electronics has expanded its portfolio of I/O connectors with the super-fast USB 3.0 series. In addition to its extensive line of USB 2.0, mini, and microUSB connectors, Yamaichi is now also offering a line of USB 3.0 interfaces. This brings Yamaichi into the high-speed USB connector market, because unlike the existing USB 2.0 interface (up to a maximum of 480 Mbit/sec), USB... Read More

Electrical Equipment & Systems

Screw Clamp Power Connectors accept large wires.

April 22, 2011

Suited for industrial environments, Series 713 M12 Connectors with 4 and 5 pins can be terminated with 16 AWG wires and max cable diameter of 10 mm. Both male and female versions are available in straight form and can conduct currents up to 8 A/contact. Series 820 7/8 in. Connectors with 5 pins can be terminated with 14 AWG wires and max cable diameter of 14 mm. Available in male and female... Read More

Electrical Equipment & Systems

Battery Charge Controller IC is rated up to 60 V.

April 20, 2011

Capable of driving typical DC/DC converter topologies, LTC4000 converts externally compensated DC/DC power supply into full-featured battery charger. It operates across 3-60 V input and output voltage range; is compatible with various input voltage sources, battery stacks, and chemistries; and preferentially provides power to system load when input power is limited. IC also controls external... Read More

Electrical Equipment & Systems

Consumer Products Safety Commission (CPSC) Approves AlumiConn®

April 20, 2011

O'FALLON, MO - King Innovation's AlumiConn® Aluminum to Copper Lug has been approved by the Consumer Products Safety Commission (CPSC) as a long-term repair method for aluminum wiring. In a unanimous vote, members of the Commission decided that the AlumiConn lug will be added to their list of products approved for aluminum wiring repairs. AlumiConn meets the agency's standards to prevent the... Read More

Electrical Equipment & Systems

Jump Starter efficiently serves mixed-fleet environments.

April 14, 2011

Powered by dual Clore PROFORMER batteries, Jump-N-Carry JNC1224 delivers 3,400 peak Amps (850 cranking Amps) in 12 V mode and 1,700 peak Amps (425 cranking amps) in 24 V mode. Batteries are designed for vehicle jump starting and repeatedly deliver high output over short duration without degradation. Built-in automatic charger enables unit to charge at 24/7/365 rate, Industrial Grade Hot Jaw(TM)... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Adjustable Cable Fitting terminates metal-clad and Teck cable.

April 14, 2011

Featuring swashplate design, STAR TECK EXTREME DIRECTOR(TM) Cable Fitting is adjustable from 90-180° to minimize installation time and is available in ½ and ¾ in. NPT hub sizes. Its full circular bore eases cable insertion while alignment guides serve as reference points to ensure fittings are installed at same angle. Stainless steel grounding ring with dual sets of grounding devices... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

RFS' Corrugated Aluminum RF Coaxial Cables Provide the Best Solution to the Copper Crisis

April 12, 2011

Colombes, France - Radio Frequency Systems (RFS), the global wireless and broadcast infrastructure specialist, addresses growing issues of copper price and security with a proven, high-performance aluminum-based RF coaxial cable solution. RFS' CELLFLEX® Lite corrugated aluminum cable design allows for excellent flexibility and crush resistance. The performance and reliability of CELLFLEX®... Read More

Electrical Equipment & Systems, Services

Advanced Interconnections Quality System Meets ISO 9001:2008 Standard

April 11, 2011

West Warwick, RI, - Advanced Interconnections Corp. (Advanced) recently passed a comprehensive ISO audit, successfully earning recertification for its quality management system to the ISO 9001:2008 Standard. "With an increased focus on customized interconnect solutions, attention to customer requirements is critical to ensure that our precision engineered products perform as expected in high... Read More

Electrical Equipment & Systems

Ideal Group Installs First Charging Station in Southwest Detroit

April 8, 2011

DETROIT, Mich, March 25, 2011 - The Ideal Group announces the installation of a new commercial charging station, the first in Southwest Detroit, at the company's Clark Street headquarters. The ChargePoint Network charging station will serve Ideal Group guests and employees, including Ideal Group Founder/ CEO, and Chevy Volt driver, Frank Venegas. The installation of the charging station at the... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

Active Optical Cable Assemblies operate up to 10 Gbps/lane.

April 6, 2011

Designed with internally terminated optics, PARALIGHT QSFP+ cable assemblies have passively cooled design and fully integrated optical engines. Cable management is facilitated via 3.0 mm dia and tight bend radius. Electrical-optical and optical-electrical conversion are built into connector shell. Cables feature 7 transmit and 4 receive channels for InfiniBand standard SDR, DDR, and QDR... Read More