AutomationDirect.com
Cumming, GA 30040-9905
Nov 06, 2009 Available in 6 lengths from 0.3-10 m, Patch Cables have right-angle M12 female plug with LED indicator on one end and axial male connector on other end. Polyurethane jacket enables use in oily and direct sunlight applications. Offered in 2, 5, and 10 m lengths, Quick Disconnect Cables include LED indicator to confirm signal presence. They have M12 right-angle female plugs and can be used with patch cables to extend distance.

Phihong USA
Fremont, CA 94539
Nov 05, 2009 Available in 5 and 9 Vdc outputs, PSC12x Series consists of A, E, K, S, and C fixed plug versions for use in US, Europe, UK, Australia/New Zealand, and China, respectively. Units are double insulated, meet Class B EMI standards, and feature short-circuit protection with auto-restart, as well as over-current and over-voltage protection. Per ENERGY STAR Level V efficiency standards, all models feature power draw of less than 0.3 W at no-load.

PCT International Inc.
Gilbert, AZ 85233
Nov 05, 2009 Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

ARM Ltd.,
Sunnyvale, CA 94085
Oct 29, 2009 Balancing low latency with guaranteed bandwidth, AMBA® Network Interconnect (NIC-301) with QoS delivers rich media experience from ARM Cortex(TM) CPUs, Mali(TM) GPUs, and Video processors. AMBA Dynamic Memory Controller (DMC-342) supports LPDDR2 memories and manages memory power modes to reduce system level power consumption. AMBA Verification and Performance Exploration (VPE-301) tool enables creation of what-if scenarios to explore performance of subsystems.

Quail Electronics
Livermore, CA 94550
Oct 29, 2009 Designed for dimly lit environments, 0310.120LT lets specialists in medical field know if connection is on. It consists of standard NEMA 5-15P Hospital Grade Green Dot Plug configuration with internal LED that will light up when cord is plugged into power source. This 10 ft power cord uses 18/3 AWG cable with Grey SJT jacket, and equipment end is IEC-60320-C13 Clear. Featuring UL and C-UL approvals, cord carries 10 A, 125 V rating.

Alpha Wire Corp.
Elizabeth, NJ 07207 0711
Oct 28, 2009 Solar cables and photovoltaic (PV) wire withstand harsh environments - temperatures from -40 to +90°C, ozone and UV radiation, moisture, oil, direct burial - of solar energy applications. Available in wire range from 14-2 AWG, PV wires come in 2 versions to meet UL 4703 PV wire/TUV 2 PFG 1169 requirements or UL 4703 PV wire requirements. Solar cables, offered in 18-12 AWG sizes and conductor counts from 3-9, are available shielded or unshielded.

Sullins Electronics Corp.
San Marcos, CA 92079-0189
Oct 26, 2009 Featuring 1.00 pitch, Card Edge Connectors support PCI Express® standards for signal and power as well as auxiliary signals at interface between motherboard and add-in card. Units are rated at 1 A/contact and offer x1, x4, x8, x16, x24, and x32 contact positions to accommodate range of bandwidth requirements. Serial lanes are comprised of 2 differential wire pairs that support data transfer rate of 500 MB/s in each direction, per lane. They feature 2.5 GHz clock rate and 5 GT/s bit rate.

Leviton Manufacturing Co., Inc.
Melville, NY 11747
Oct 23, 2009 Available in commercial/industrial and hospital grade versions with 15 and 20 A, 125 V ratings, Smart Grid Tamper Resistant Receptacles feature protective shutters that accept only 2-prong electrical plug and also provide built-in surge protection for sensitive electronics. NAFTA-compliant devices provide EMI/RFI noise filtering and afford point-of-use protection for up to 18,000 A of surge current. Units also comply with NEC Section 406.11 and UL 1449's 3rd Edition.

Molex Inc.
Lisle, IL 60532-1682
Oct 22, 2009 Maintaining low and stable contact resistance under severe temperatures and vibrations, MX123(TM) System is optimized for transportation power-train applications. Matte seal technology allows close-to-center terminal spacing and eliminates need for crimping individual cable seals, while interfacial seal is interior to connector shroud, protecting it from damage during harness handling. Header pins are protected from scooping by center wall that extends longer than terminal length.

HMS Industrial Networks, Inc.
Chicago, IL 60607
Oct 21, 2009 Combining Profinet interface with IRT functions according to Class C standard, Anybus-S Profinet-IRT interface includes analog/digital components and 2-port real-time switch. Integrating 2 SC-RJ fiber optic connectors for physical network connection, embedded communication module features dual-port RAM-based hardware and software interface, with interchangeability facilitated by 16-pin RJ11 connector. Fiber optic transmission enables high immunity to EM disturbances.

Bulgin Components PLc
Barking Essex IG11 0AZ  United Kingdom
Oct 20, 2009 Compliant to ATEX standards for use in Zone 2 and Zone 22 environments, EXPlora series is made from UL94V-0 rated Polycarbonate material and environmentally sealed. Connectors come in 2-, 3-, 4-, 5-, 7-, and 10-pole variants and 4 body styles: cable, in-line cable, panel, and flange fixing. Each contact insert is available with pin or socket contacts and can be used with any body style. Depending on number of poles, ratings range from 18 A, 600 Vac/dc to 10 A, 250 Vac/dc.

Interpower Corporation
Oskaloosa, IA 52577-0115
Oct 20, 2009 Medical Socket Strip is rated for maximum of 15 A with service at 125 V and features manual reset circuit breaker. Designed to be permanently attached to fixture, such as cart or some other type of item in hospital or dentist office, product has attached hospital grade power cord that can be ordered in lengths up to maximum of 25 ft. Outlet covers can also be attached as optional feature.

Interpower Corporation
Oskaloosa, IA 52577-0115
Oct 20, 2009 Medical Socket Strip is rated for maximum of 15 A with service at 125 V and features manual reset circuit breaker. Designed to be permanently attached to fixture, such as cart or some other type of item in hospital or dentist office, product has attached hospital grade power cord that can be ordered in lengths up to maximum of 25 ft. Outlet covers can also be attached as optional feature.

GOEPEL electronics LLC
Austin, TX 78759
Oct 20, 2009 SCANFLEX® 9305-BAC/RS232 Bus Access Cables, when used with multiport module SFX9305, enable test of RS232 interfaces in combination with extended JTAG/Boundary Scan operations. Cables can be plugged into each free port of module, with interface recognized and configured automatically and BAC type/number defined by user. Interface functions contain stepwise handling of protocol layers, including bidirectional data transfer, allowing users to control interface target/identify faults.

W. L. Gore & Associates Cable & Assemblies
Landenberg, PA 19350
Oct 19, 2009 Fully compliant with SFF-8431 Revision 4.1 specification, 10 meter SFP+ Copper Cable Assembly can go 3-5 m longer than other passive options. Product uses GORE(TM) EYE-OPENER+® Conductor Technology and low-loss expanded PTFE cable dielectric, which balances waveform distortion penalty and voltage modulation amplitude parameters to achieve results within specification limits set forth by SFF-8431 committee. dWDP and VMA loss are 5.60 dBe and 3.95 dBe, respectively.

ITT Interconnect Solutions
Santa Ana, CA 92705
Oct 16, 2009 Designed with field-attachable feedthru connector, mating attachable cable connector, cross-over adapter, and accompanying hardware, Field-Attachable Packer Feedthru System allows connector to be installed on top side of packer, eliminating need to splice downhole cables. Variable threaded system enables vertical adjustment of up to 3 in. Featuring max diameter of 2.6 in., system is rated to 5,000 Vac with current to 140 A and pressure to 5,000 psig.

Wireworks Corp.
Hillside, NJ 07205
Oct 15, 2009 Multipin-based MCAT5 network cabling system includes tails that support 6 channels of 10/100/1000BASE-T signals and equipment requiring 4 pairs/RJ45. Tails are color-coded for identification and terminated with RJ45 or etherCON connectors. Featuring double-jacketed, shielded design, system has 0.57 in. dia and weighs 14 lb/100 ft, and cable sections are available in lengths up to 250 ft. Product's G-Block rectangular connector design eliminates cross-threading/locking ring damage.

The Eraser Company, Inc.
Syracuse, NY 13221
Oct 15, 2009 Designed for portability and weighing only 2 lb, Model 824 Coaxial Cable Stripper can strip cables including RGU, semi-rigid, plenum, heliax, and more, as well as semi-rigid cable up to .141 in. OD. It features standard battery pack that provides about 200 strips/charge. Carrying case, charger, and adapter cord are included.

RADIALL Inc
Chandler, AZ 85226
Oct 15, 2009 Intended for commercial aircraft wiring systems, QM Rectangular Connectors feature quick-lock technology, which withstands shock, vibration, noise, and high temperatures. Track and mate is performed through rail mount installation without tools. Rails are manufactured with high-conductive metal plating on composite shells. Utilizing shell polarization positions and EPXB standard inserts, connectors offer integral strain relief with optional EMI backshell to meet severe airborne requirements.

Littelfuse, Inc.
Des Plaines, IL 60016
Oct 14, 2009 Intended for over-current protection of PCBs, 160 Series 250 V time-lag, SMT fuse/clip assembly offers current ratings from 500 mA to 5 A, with maximum inrush current withstand of 127 A²s and interrupting rating of 50 A at 250 Vac. Unit measures 10.90 x 4.80 x 4.80 mm, and fuse clip holder prevents fuse from opening during momentary overloads. Assembly is RoHS compliant, halogen-free, and designed for LED lighting, lighting system, power converter, and telecom equipment.