Thomas & Betts Corp.
Memphis, TN 38125
Apr 02, 2008 Colored UV-stabilized Ty-Rap® cable ties are designed for outdoor applications subject to ultraviolet (UV) ray exposure, which can degrade strength of untreated nylon. UL®-Listed and CSA-certified products will blend in with cabling colors and not stand out where cables are in plain view. In addition to oval-shaped cable tie head, elements of construction include rounded body that does not cut into cables, and ribbed design that minimizes slippage along cable.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Apr 01, 2008 Model 4157-DC is duplex AC/MC connector with cable range from 14/2 to 10/3 metal clad cable and ¾ in. electrical metallic tubing (EMT). Couplings' internal dimension allows conductors to pass through to EMT conduit without damaging conductor insulation. Transition fitting is suited for new construction and retrofit applications in schools and commercial buildings.

Sabritec
Irvine, CA 92614
Apr 01, 2008 Capable of providing low pass filtering and effective insertion loss without use of soldered components, Solderless Filter Connector series uses contact clip to make connection from signal/power contact to capacitor array. Grounding of capacitor to connector body (shell) is achieved via grounding spring, and filtered connectors meet electrical and filtering performance of soldered type filter connectors. Seal allows for water wash immersion of connector in unmated condition.

Richco, Inc.
Morton Grove, IL 60680
Apr 01, 2008 RoHS-compliant WIT-40LAR series eliminates need for multiple parts by incorporating cable tie and holder into one part. Able to be reused multiple times, products press and lock into pre-drilled holes and remove from panel when wings are pinched. Retaining tab secures any unused strap, eliminating need to cut off excess. Measuring 7.677 in. long, series accommodates bundles diameters up to 1.97 in. and offers minimum loop tensile strength of 40 lb.

Del City
Milwaukee, WI 53209
Mar 31, 2008 Ergonomic ratchet crimp tool has 4 crimp stations, ranging from 22-8 gauge, and color-coded crimp nests that help user match correct terminal. Mating mechanism prevents jaw slippage and misalignment, while handle length facilitates crimping process by requiring minimal force application. Release switch near handle operates with one push towards crimp nest. Designed for heat-shrink terminals, tool also accommodates standard insulated terminals.

Samtec, Inc.
New Albany, IN 47151 1147
Mar 27, 2008 Twisted Pair IDC cable assemblies employ 32 AWG 7/40 tinned cable with PVC insulation. Female assembly, Series FFTP, is double-ended with standard notch polarization and mates with .050 in. micro, shrouded, and ejector headers. Male Series FMTP is available double-ended or with transfer end and mates with .050 in. low profile and micro socket strips. Both series are RoHS compliant and available in choice of cable lengths with optional reverse connector on second end.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 27, 2008 Offering UL94 Flammability Rating of V-0, Ty-Duct® Wiring Ducts are suited for high-temperature applications up to 203°F or where specifications call for products that will not emit toxic or corrosive gases. Units provide complete solution for routing and concealing wiring in control panels. Smooth corners and edges prevent damage or disfigurement of wires, while V-shaped slot lead-in facilitates wire insertion.

Northwire, Inc.
Osceola, WI 54020
Mar 26, 2008 Offered in any length, Guardian Load Cell Cables come in standard and extreme environment versions for 4- or 6-wire load cells. Standard cable features weatherproof PVC jacket, while extreme environment cable is double jacketed with polyurethane over PVC, providing resistance to chemicals, abrasion, and weather. Both include 20 AWG stranded tinned copper wire, color-coded conductors, and tinned copper braid armor shield over aluminized foil shield for RFI/EMI protection.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Mar 25, 2008 Featuring size 8 power contacts with optional integrated filter planar array, Combo D Series high power connectors ensure that 50/60 Hz frequency from power network does not interfere with operation of equipment. They accommodate right angle press fit termination and Eurostyle brackets that meet CECC75 301 802 specifications. Capable of withstanding 1,000 V peak, units offer maximum contact current rating of 40 A and passive filter array with 47 nF capacitance.

Siemon Co., The
Watertown, CT 06795
Mar 25, 2008 Featuring TERA plug on one end and RJ45 plug on other end, 4-pair TERA to BladePatch Cords utilize category 7A stranded cable and meet or exceed 10GBase-T standard requirements. Two-pair cords allow two 10/100 Ethernet applications to be supported over single TERA outlet and cable through cable sharing. Available in T568A/B wiring schemes, cords meet FCC68.500 and IEC 60603-7 specifications, ensuring resistance to corrosion, extreme temperatures, and airborne contaminants.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 20, 2008 Packaged in Han 10 B housing, Han® K 4/4 Connector combines 4 power contacts with 4 signal contacts and pre-leading PE contact. Current carrying capacity is up to 63 A per power contact, and power connections are made using axial screw terminals, which are suitable for 8-4 AWG wire. Featuring cage clamp terminations, 4 signal contacts are each rated up to 16 A. With finger safety of both female and male sides, Han K 4/4 can offer alternative to round CEE plugs.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 20, 2008 Fulfilling Cat 5e requirements, shielded Han RJ45 Ethernet Module comes in male and female parts, both protected by plastic collar. Female module is designed as gender-changer with two RJ45 jacks, while male module accepts standard or overmolded RJ45 patch cords.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 19, 2008 HARTING PushPull LC Duplex integrates PushPull technology with inserts for fiber optic systems. Integration of standard LC fiber optic connectors, in single-mode and multimode, is suitable for harsh outdoor environments. Robust interfaces also offer vibration and IP 67/65 protection as standard. Connectors are suited for applications such as FTTA (Fiber To The Antenna), FTTH (Fiber To The Home), or WiMAX.

HARTING, Inc. Of North America
Elgin, IL 60123 5538
Mar 19, 2008 HARTING Micro Card Edge Data (MCE) connector is aimed at board-to-board mezzanine or small pluggable daughter card applications. Suitable for data transmission rates up to 14 Gbps in telecommunication, medical, and industrial applications, connector is available with 40 and 100 contacts in pitch of 0.8 mm. It offers features for SMT reflow soldering and features tape and reel packaging with pick and place pad for vacuum nozzle.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 19, 2008 RoHS-compliant Positive Lock HVAC Motor Connectors feature one-piece housing with 94V-0 flammability rating to facilitate and accelerate connection of wiring harnesses to HVAC blower motors. Available in 4- and 5-position housings, design provides positive connections to motor's power and discrete speed tap control contact tabs. Positive locking of mated connection can be heard via audible click, and polarized housings prevent mismating of circuits.

Belden
Richmond, IN 47375
Mar 18, 2008 Designed to carry color information as one signal over dual coax cable, S-Video/BNC Cable remains flexible in temperatures as low as -40°C and is suitable for indoor and outdoor use. Coaxes deliver minimum return loss of 21 dB between 5-850 MHz and 18 dB between 851-3,000 MHz. Featuring 25 AWG/0.5 mm stranded bare copper conductor with gas-injected foam HDPE insulation, cable combines 100% Duofoil shielding with 95% tinned copper braid. Coax jackets are FRNC/LSNH color-coded in yellow and white.

Duraline Div., J.B. Nottingham & Co., Inc.
Islandia, NY 11749
Mar 17, 2008 Single Pole Cam Type Connectors J Series Model E1023 achieve positive connections by latching Cam Lok design and are rated to 690 A, 750 Vac/Vdc with 250-750 MCM. Connectors exceed OSHA and NEMA requirements. Male and female versions are protected by shrouded style Taper nose insulating sleeves and jackets that are color-coded for phase identification.

Asoka USA Corporation
Foster City, CA 94404
Mar 13, 2008 With speeds up to 200 Mbps, PlugLink® AV 9667 iSocket turns every power outlet into Ethernet network connection, while retaining use of power outlet. Filtered pass-through prevents network performance degradation from noisy devices on electrical wiring. Equipped with 128-bit AES encryption, PlugLink supports audio, media presentations, photos, video, and VoIP as well as multiple streams of HDTV, making it suited for connecting to DVRs, set-top boxes, or IPTV applications.

ETCO Incorporated
Warwick, RI 02888 1501
Mar 12, 2008 ECTO Bender-Booter applies boot to terminated ignition wire and bends it to produce 45 and 90 deg angled or straight boots. Featuring dual palm-button actuation for operator safety, air-powered unit is capable of processing up to 100 wire assemblies per hr. Measuring 24 x 18 in., it is designed to bend and boot ETCO CB2, CB3, AB16, CB8, AB15, and AB20 boots, along with DT2000LB, DT207LB, DT200B, DT250B, DT257B, SP19, and DT7B ignition terminals.

Meltric Corporation
Franklin, WI 53132
Mar 12, 2008 Featuring butt-style contact technology, Welder Plugs and Receptacles are rated to safely make and break under full load up to 200 A, and are UL/CSA approved for branch circuit disconnect switching. Safety shutter maintains dead front thus preventing unintentional access to live parts. Units facilitate compliance to NFPA 70E electrical safety requirements because they maintain NFPA 70E defined hazard/risk category 0 during electrical equipment connection and disconnection processes.