Panduit Corp.
Tinley Park, IL 60477 3091
Jun 10, 2008 Designed to route and protect electrical wire or data communications cabling, Narrow Slot Hinged Cover Wiring Duct provides optimal alignment with high-density wire termination points for wire management. Compliant with NFPA79-2002 and IEC-60332-1 standards, unit has dual-hinged cover that provides channel access, streamlining maintenance. Cover retention flanges prevent cover slip or loss when exposed to vibration and help maintain neat panel appearance.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Jun 10, 2008 UL recognized for use within listed assemblies, USL-120 is provided with set screw that secures conduit without damaging conductors. Flexible Steel Conduit Connector can be used with assemblies including office partitions, showcases, merchandising displays, lighting fixtures, range tops, and other appliances.

Digital Monitoring Products
Springfield, MO 65803
Jun 09, 2008 Used to provide discreet, concealed protection for doors, windows, or other applications, 1131 Wireless Contact employs 900 MHz frequency-hopping spread spectrum (FHSS) technology to ensure clear and accurate signal transmissions without interference. It comes ready to install, including battery and hardware kit, and features energy-conserving 2-way communication that lends to expected battery life of 5 years.

Keystone Electronics Corp.
Astoria, NY 11105
Jun 09, 2008 Available with choice of 10 colors, Miniature, Compact, and Multi-Purpose Test Points facilitate identification in high-density, .062-.093 thick PCBs and also serve to keep on-board terminals perpendicular to PCB. Miniature types are manufactured from .010 in. phosphor bronze with silver plating and mount in single .040 in. dia PCB hole, while Compact and Multi-Purpose types employ same materials sized at .015 in. dia and mount in .063 in. dia PCB hole.

Hoffman
Anoka, MN 55303 1778
Jun 09, 2008 UL508, CSA, and CE recognized 60 mm Busbar System can be positioned vertically or horizontally to optimize space and is touch-safe rated to IP20. It uses 3 copper bars attached to end supports connected to back panel to distribute power throughout enclosure, and components mount onto adapters that snap onto busbar, establishing electrical connection and mechanically fastening in one step. Input and output terminals accommodate wire sizes to 600 MCM.

Pass & Seymour/Legrand
Syracuse, NY 13221
Jun 06, 2008 Tamper-Resistant Nightlight/GFCI Receptacles are designed to meet 2008 NEC standards for child electrical safety pertaining to newly constructed residential units. Lexan lens-sealed LED nightlight has 20-year life expectancy, and integrated photocell automatically turns light on and off in dark and daytime conditions, respectively. Duplex receptacle's built-in shutter system prevents children from inserting metal objects into slots and touching electrically live components.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Jun 06, 2008 Complying with European CEN/TS 45545 standards governing railway fire safety, VEAM CIR Series has exposure period of at least 15 minutes at ISO 834-1 heating curve, where maximum temperature is 800°C. Featuring stainless steel shell and ceramic insulation, units come with 35 size 12 poles at 40 A. Silicon rubber grommet ensures sealing, while contacts with metallic retention clip provide high integrity contact that does not release under extreme shock and vibration conditions.

Bomar Interconnect Products
Ledgewood, NJ 07852
Jun 05, 2008 With waterproof, weather-tight, through-panel mount seal, V-Bite(TM) female Type N connector provides performance in frequencies through 18 GHz. It has impedance of 50 W, and can be employed in high power applications including base stations, cellular antennas, and portable test and measurement equipment. Featuring brass/gold contacts, unit is precision engineered of machined brass and includes straight-through contact design to provide low reflection factor with VSWR of 1.30.

Anderson Power Products
Sterling, MA 01564
Jun 04, 2008 Made of PBT material, High Performance SB® Connectors feature UV resistance, temperature range of -40 to 266°F, and resistance to hydrocarbons and solvents used in automotive applications. Products are UL recognized from 50-350 A and rated at 600 Vac or Vdc operation. Designed with mechanically keyed housings, dual-pole connectors are fully intermateable and interchangeable with standard SB® connectors.

Arcos Industries, LLC
Mount Carmel, PA 17851
Jun 04, 2008 Designed for welding nickel-copper alloys (ASTM B127, B163, B164, and B165), Arcos 816 (ERNiCu-7) electrode can be used for welding in salt, seawater, and reducing acids environments. Dissimilar welding applications include joining nickel-copper and copper-nickel alloys to Nickel 200. Developed for GTAW/GMAW overlay of nickel-chromium alloy onto carbon and stainless steel and for cast repair, Arcos 72 (ERNiCr-4) offers resistance to high temperature and fuel-ash corrosion.

Igus, Inc.
East Providence, RI 02914 0349
Jun 04, 2008 Suited for machine vision applications, Chainflex® CFBUS.055 FireWire cable is designed for continuous-flexing and tight bending radii inside Energy Chain® cable carriers. Its bus pairs and supply wires are twisted together with flexible shields and optimized pitch length. Gusset-filling extruded, flame-resistant, TPE outer jacket provides protection required to prevent cable core ruptures. Tested to more than 6 million flex cycles, product supports transmission lengths up to 20 m.

3.ITT Cannon
Santa Ana, CA 92705
Jun 02, 2008 Designed for solderless component interconnection where miniaturization, reliability, and flexibility are required, Universal Contact addresses problem of uneven spring forces and poor contact resistance of connectors in portable devices. Pre-loading and anti-lift design optimizes contact force, while X-Y-Z movement capability maintains stable connection. Contact heights range from 1.3-4.0 mm (free height), and compressed heights as low as 0.9 mm are also available.

Harting KGaA
  Germany
Jun 02, 2008 HARAX® M8-S 3-pin male M8-connector is used for connecting cables with wire size of 0.08 mm² by means of insulation displacement method. Cables with outer diameter running from 2.5-5.1 mm can also be utilized.

Harting KGaA
  Germany
Jun 02, 2008 Providing safety for extreme applications in industry and transportation, Han® 4 A insert includes Han-Quick Lock® connection technique that facilitates termination without need for any special tool. Insert offers vibration secure connection.

Molex Inc.
Lisle, IL 60532-1682
Jun 02, 2008 Able to withstand harsh industrial environments, BradConnectivity(TM) M23 solutions include 6- to 19-pole connectors and receptacles in straight and right-angled versions as well as power connectors rated up to 28 A. For flexibility, M23 signal connectors include field-attachable male and female cable connectors for range of cable ODs and receptacles for front or back mounting. Inserts are offered with solder or crimp contacts, and integrated locking clip secures contacts in inserts.

Del City
Milwaukee, WI 53209
May 30, 2008 Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

Omnetics Connector Corp.
Minneapolis, MN 55432
May 30, 2008 Available in 9-65 way, dual- or single-row configurations, 0.635 mm pitch Bi-lobe® connectors are housed in metal shell and polarized to prevent mis-mating. Optionally available thumbscrew attach-and-release mechanism, supplied instead of jackscrews, provides accelerated and ruggedized means for assembly without tools. Connectors ensure signal integrity, satisfying Mil-Std-32139 where 100 G shock and 20 G vibration discontinuities must be less than 10 nsec.

Draka Cableteq
North Dighton, MA 02764
May 30, 2008 Featuring low-smoke and zero-halogen construction, EnergySafe Cables are suited for indoor or outdoor installations, in conduit, duct, or cable trays, or for aerial and direct burial up to 600 V. Available in standard sizes as well as reduced diameters for crowded raceways, cables meet UL and IEEE flame ratings, and are engineered for applications where safety of personnel and equipment is imperative.

Phihong
Fremont, CA 94538
May 29, 2008 Available with outputs of 12, 15, 18, or 24 V, 2-wire Model PSAA60W and 3-wire Model PSAA60M feature 0 A minimum load and no-load power consumption of 0.5 W maximum. Both 60 W adapters measure 5.12 x 2.36 x 1.30 in. and come in non-vented splash-proof case. Equipped with over-voltage, over-current, and short circuit protection as well as auto restart, adapters are suited for portable equipment, peripherals, networking, and gaming machines.

Icc
La Mirada, CA 90638
May 29, 2008 Exceeding TIA/EIA 568-B.2 industry performance standard, UL- and cUL-listed cables are available in 1,000 ft dispensing cartons. Each is constructed with sequential footage markings on outer jacket to facilitate usage tracking. Designed for use in voice, data, video, and security applications, CAT 5e 350 MHz and CAT 6e 550 MHz cables respectively feature 24 and 23 AWG Bare Solid Copper conductors. Both are RoHS-compliant and available with blue jacket.