Omega Engineering, Inc.
Stamford, CT 06907
Jun 02, 2008 Designed with plastic construction and mounted to rigid portion of machine, E48 DIN-style safety key interlock limit switch can be used with movable guards or covers which must be closed for operational safety. Key is removed from switch when guard is opened, positively breaking normally-closed contacts to reduce risk and safeguard workplace. CE compliant switch is suited for any industry that uses factory automation machines including automotive, food, and textile.

K-Tek
Prairieville, LA 70769
Jun 02, 2008 Measuring liquid levels to 32.8 ft and bulk solids to 16 ft, KSONIK MICRO supplies 4-20 mA output for remote indication or remote control; SPDT relay can be used to activate alarms and pumps. Ultrasonic device utilizes Variable GAP technology, which adjusts gain, amplitude, and power to ensure accurate measurement by always working with smallest return signal. Housed in IP65 polycarbonate enclosure, integrated display provides access to detailed readings.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 02, 2008 With rack dimensions of 19 x 8.75 x 13.0 in., Model 9741 high-density RJ45 A/B, 1000Base-T, Cat5e switch allows user to select 8, 16, 24, 32, or 40 channels to be populated. It features backup switching capability for data network, and accommodates up to 40 channels in 8.75 in. of panel height. A, B, and Common connectors are on rear panel, while two-position rotary switches are on front panel. All 8 pins are switched which allows for compatibility with all RJ-45 interfaces.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
May 30, 2008 Designed for use in 802.11 and 802.16 WLAN and WiMAX applications with bias voltage as low as 3.0 V, Model M/A-COM MASW-008899 can also be used in test and measurement equipment applications. Switch features typical insertion loss of 0.4 dB at 2.4 GHz while achieving isolation of 27 dB and P1dB of 28 dBm. Fabricated on 0.5 micron gate-length GaAs process, each unit is RF tested to ensure compliance, and offers full passivation.

Seco-Larm
Irvine, CA 92606-5012
May 28, 2008 Illuminated by 12/24 Vdc LED that provides up to 50,000 hours of operation, mushroom-cap Model SD-7251GCEX1Q features low current drain of 12 mA and normally open/normally closed contact rated 5 A at 125 Vac. Single-gang, stainless steel plate has EXIT and SALIDA silk-screened on it.

STMicroelectronics
GENEVA   Switzerland
May 28, 2008 With 150 kHz maximum switching frequency and 3 A maximum rated current, STC03DE220HV ESBT (emitter-switched bipolar transistor) allows designers to use single-switch flyback topology in universal-input converters operating from 90-690 Vac. Unit can achieve equivalent on-resistance of 0.33 W from collector to source. Suited for SMPS applications, it enables designers to build quasi-resonant converters up to 250 W, using common hardware platform with suitable controller such as L6565.

Electro Standards Laboratories
Cranston, RI 02921 3403
May 27, 2008 Model 7237 8-Channel RJ45 A/B switch allows capability of accessing, on each channel, one of two separate devices via device connected into channel's common port. Switch with dual power continues to pass data in event of power loss while maintaining switch positions. Switch ports are transparent to data speed and protocol. Unit offers front panel pushbutton control or remote ASCII command access through dual serial ports. All switches change positions simultaneously upon command.

Electro Standards Laboratories
Cranston, RI 02921 3403
May 23, 2008 Model 7356 6-Channel RJ45 Cat 5 A/B Switch allows users access to 2 separate devices, ports A and B, via connection through a device connected to common port for each of switch's 6 channels. Each channel is individual switch that is independently controlled, and switch ports are transparent to all data. Product offers users flexibility for manual control via front panel pushbuttons or remote control from RS232 serial port located on rear of unit.

Micro Pneumatic Logic, Inc.
Pompano Beach, FL 33069
May 23, 2008 Rated between 0.01-0.75 in. H₂0, MPL 5000X miniature pressure switch features proof pressure of 1.0 psi with burst pressure of 25 psi. Switch performs in operating temperature range of -40 to 120°F and utilizes metal contacts. Suited for PCB mounting, it can be incorporated into miniature assemblies for medical applications like nebulizers, portable oxygen concentrators, and other forms of drug delivery systems.

Linemaster Switch Corp.
Woodstock, CT 06281
May 23, 2008 Featuring chrome-plated, cast zinc housing, GEM Series includes wired and wireless models as well as versions with protective vinyl covers offering environmental protection. Round, low-profile units are suited for operating assembly equipment, tattoo machines, dispensing equipment, wire cutting and processing machines, and dental scalers.

NKK Switches
Scottsdale, AZ 85260-3420
May 22, 2008 Available in real or complement codes, decimal or hexadecimal configurations, FR Series 10 mm Ultra-Thin DIP Rotary Switches can be specified in through-hole or SMD models. Units feature switching rating of 100 mA at 5 Vdc and non-switching rating of 100 mA at 50 Vdc. Cam-activated movable contact and gold contacts ensure continuity, while detent mechanism gives positive action for accurate switch setting. Actuators are fully rotational and can be operated clockwise or counterclockwise.

Fairchild Semiconductor
San Jose, CA 95134
May 21, 2008 Designed to protect applications with capacitive loads from voltage and current transients, IntelliMAX(TM) FPF1007-9 Series offers slew-rate times of 10 µs, 80 µs, and 1 ms. Longer slew rates ensure slower turn-on time, which results in limiting in-rush current into capacitive circuit elements. Utilizing lead-free terminals, RoHS-compliant switches are suited for cameras, handsets, and other portable electronics.

Switches Unlimited
Woodside, NY 11377
May 16, 2008 Fully assembled with NO/NC 10 A contacts, ESTOP120 and ESTOP24, respectively, feature 120 and 24 V super bright LED for use in facilities that have products in poorly lit areas or challenging indoor/outdoor environments. Corrosion-resistant octagonal locking chrome-plated ring fastens from front of panel, and modular construction promotes contact configuration flexibility. Both 22 mm E-stops are front panel-sealed to IP65/NEMA 4X, UL-Listed, CSA-Certified, TUV-Approved, and CE-Marked.

Allegro MicroSystems Inc.
Worcester, MA 01615
May 16, 2008 Suited for battery-operated electronics, Model A1172 features latched digital outputs and omnipolar magnetic actuation, and has operating supply voltage of 1.65-3.5 V. Both north and south polarity magnetic fields of sufficient strength activate output switching, to either off or on. Unit provides 2 push-pull outputs that are configured such that one output switches off in absence of sufficient magnetic field while other output switches on in absence of magnetic field.

Maxim Integrated Products
Sunnyvale, CA 94086
May 16, 2008 Capable of switching data at signaling data rate of 5.0 Gbps with operating voltages of 1.8, 2.5, or 3.3 V, Models MAX4888A/MAX4889A feature single digital-control input to switch signal paths. Model MAX4888A is dual SPDT switch that is suited for switching 2 equivalent lanes (Rx or Tx) of PCIe data, while Model MAX4889A quad switch handles 4 equivalent lanes. Units are fully specified to operate from single 3.0-3.6 V power supply over extended -40 to 85°C temperature range.

Maxim Integrated Products
Sunnyvale, CA 94086
May 16, 2008 Models MAX4928A/MAX4928B high-speed passive switches utilize n-channel switches to route differential signals between graphics and memory controller hub and either PCIe 2.0 socket or DisplayPort connector. They feature 6 pairs of bidirectional, DPDT switches and return loss greater than 12.5 dB at 2.5 Ghz to support data rates of greater than 5 Gbps. Model MAX4928A is designed for ATX motherboard form factor, while MAX4928B is intended for BTX form factor.

Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 MAX9598 is switch matrix for routing of audio and video signals between MPEG decompression chip and 2 external SCART connectors. It integrates DirectDrive(TM) technology to prevent click-and-pop noise. Contained in 6 x 6 mm TQFN package, unit operates from 0 to +70°C and includes audio and video channels featuring input-source-selection multiplexers, input buffers, and output buffers. It consumes 70 mW of quiescent power and is controlled through I²C-compatible interface.

C&K Components
Newton, MA 02458
May 12, 2008 MDS Series micro snap-acting detect switches are available in vertical and right-angle PCB mount, with 2.9 mm travel, and SDS Series side-actuated detect switches have 2 mm profile and 2 mm overtravel. Featuring top or side actuation, SDT Series micro mini pendulum detect switches offer 2.2 mm profile, while HDT micro mini detect switches have 3.35 mm profile. Surface mount switches are implemented on server blade as safety mechanism to guarantee blade is powered down.

Electro Standards Laboratories
Cranston, RI 02921 3403
May 12, 2008 Supporting fiber optic wavelength of 850 nm and gigabyte data rate, QuickSwitch Model 6273 ST Duplex, MultiMode, A/B switch allows one workstation or device to access either of two separate fiber optic networks. It uses mirror technology and can be accessed remotely by using DB9 RS232 serial port. Users can either remotely monitor status and control switch functions or use front panel pushbutton control.

Electro Standards Laboratories
Cranston, RI 02921 3403
May 12, 2008 PathWay Model 7207 DB-9 A/B/C/D Switch enables connection of any workstation or device between 4 other devices or networks. Transparent to data format, switch uses a DB-9 Interface for remote control, accepting RS232 serial data ASCII commands. Model 7207 has no local or front panel switch control, which makes it suited for remote control only applications.