Altech Corp.
Flemington, NJ 08822
Mar 26, 2009 Allowing for multiple connections per phase and up to 83 disconnects per meter, Altech® Power Distribution System can supply separate voltages to auxiliary circuits and control circuits for relays, contactors, and timers or deliver power to circuit breakers, motor starters, switches, and contactors. System houses 2 conductors in plastic insulation suitable for voltages up to 600 Vac. Conductors with current ratings of 25, 63, or 80 A are available.

Eaton Corp.
Cleveland, OH 44114
Mar 25, 2009 With Advanced Monitored ePDU® products, IT managers can monitor, track, and mange power consumption at receptacle level for all equipment in data center. Each receptacle is enabled with advanced current measurement device providing real-time current data via local display or through network connection. Available in single- and 3-phase configurations up to 60 A, ePDU products offer 8 function levels, allowing users to measure power usage and temperature at system, chassis, or rack level.

Dongah Elecomm
Richardson, TX 75082
Mar 17, 2009 ARS24-150 Energy System, 24 V/150 A power shelf is powered by 2 hot-swap redundant power modules and is packaged with DC distribution panel and battery management circuits in one 3U high, 19 in. rack-mount shelf. Analog status and control signals for power supply modules feature remote sense, remote enable, ACOK, DCOK, and active current share. Battery management system provides ACV, DCV, and load monitoring with control of charging/discharging batteries with Ethernet connection.

Chatsworth Products, Inc. (CPI)
Westlake Village, CA 91361
Jan 27, 2009 Single- and Three Phase PDU Power Strips help manage escalating data center power requirements, address additional power management within cabinets and racks, and guard against current over-draw and potential equipment damage. Offered in vertical and horizontal configurations, most models are also available with built-in local and/or IP current meters with digital display. Three-Phase PDU Power Strips are available in 44-wire 250 V DELTA and 5-wire 120/208 V WYE configurations.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 23, 2009 Finger-proof CROWN LINE bus bar system consists of extruded profile holding 2 solid copper conductors; power is supplied to conductors using quick connect color-coded RAPID LOCK right angle sockets. Option to vary conductor thickness provides flexible design up to 2 m in length, with ability to pre-form conductors to fit into awkward envelopes, thereby maximizing available space for essential equipment. Circuit breaker connector can be mated to busbar at any location along its length.

American Power Conversion
West Kingston, RI 02892
Jan 21, 2009 Designed for 480 Vac output UPS applications, 12 in. wide Modular 3-Phase PDU consists of enclosure and 3-phase circuit breaker housed in power distribution module with pre-terminated cordsets. Touch-safe backplane enables online reconfiguration. Featuring hot-swappable modular circuit breakers, PDU allows electricians, facilities engineers, and data center managers to add and replace circuit breakers, cordset, and branch current monitoring without disruption to other circuits.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jan 12, 2009 Enabling end equipment to handle heavy capacitive loads, constant current TPS2552/53 and latch-off TPS2552-1/53-1 offer programmable current-limit threshold from 75 mA to 1.3 A via external resister with up to 6% accuracy. Products meet USB current-limiting requirements, operate from 2.5-6.5 V input, and feature 2 µsec over-current response. Same product, available in SOT23-6 and 2 x 2 mm SON-6 packaging, allows protection for 2.5, 3.3, and 5 V rails.

Cooper Wiring Devices
Peachtree City, GA 30269
Dec 18, 2008 Arrow Hart® Commercial and Industrial Specification Grade Temporary Power equipment promotes delivery of safe, reliable power. RhinoBox(TM) Temporary Power Centers, featuring stackable design, safely centralize and distribute hub and spoke power, while Portable Outlet Boxes provide bridge between power distribution points. Listed for wet locations, Portable GFCIs protect against electrical injury from ground fault hazards indoors and outdoors.

Power Distribution, Inc.
Richmond, VA 23223
Nov 07, 2008 Featuring front access design, Wavestar(TM) Mission Critical 400, 625, and 750 KVA PDUs display both PDU critical functions and Branch Circuit Monitoring System in single Wavestar(TM) monitor. These points can also be provided remotely to building management system via Modbus or SNMP. Additional features include compression lugs, plug-in style breakers, hinged panels with 2 point locks, and bus connections for transformer and circuit breakers.

Q-Tran Inc.
Bridgeport, CT 06610
Oct 07, 2008 Composed of 217 components, Q-Scape is UL-listed for 3 applications and is suited for indoor and outdoor lighting. Scalable system includes Q-Set cassettes within housing that feature interchangeable modules with toroidal transformers and 5 voltage taps. Featuring 1/3 in. thick door gasket, Q-Vault housing is constructed of compression molded epoxy composite to meet IP68 standards. System also includes Q-Clik compression fittings, Q-Wire, and Q-Trix inground hub box.

Coleman Cable, Inc.
Waukegan, IL 60085
Sep 09, 2008 X-Treme Box(TM) rugged worksite power distribution center has stackable roll cage design to simplify transport in contractor's vehicle. Cage is constructed with tubular steel frame that is tapered on top to allow several boxes to be vertically stacked when being moved from one jobsite to another. OSHA and NEC Compliant, ETL Listed system includes 6 NEMA 20A locking or straight-blade receptacles, 1 NEMA 30 A locking receptacle with overload protection, and 50 A inlet and outlet.

Ferraz Shawmut
Newburyport, MA 01950
Aug 25, 2008 Fused Selective Coordination Panel is UL67-listed panelboard that uses class CC Ultrasafe(TM) fuse holders with blown fuse indicators (fuses provided separately to suit specific loads during installation). Compact size and removable backpan facilitate installation. Capable of accomodating 12-42 circuits, panel features 100, 200, or 300 A copper main bus, and bonded ground bar and neutral bar with set-screw terminations.

Emerson Network Power
St. Louis, MO 63136
Aug 25, 2008 Able to connect up to three Liebert GXT2 10 kVA UPS units, Parallel POD provides adaptable power capacity and redundancy to support critical applications housed in small and mid-sized IT spaces. By paralleling units together, user can add 10 kVA of capacity and 10 kVA for redundancy, allowing multiple units to work together to deliver 16,000 W of protection. Devices provide on-line double-conversion protection, and can be serviced and maintained without shutting down load.

Schweitzer Engineering Laboratories Inc.
Pullman, WA 99163
Aug 06, 2008 SEL Distribution Automation Control System analyzes and detects permanent fault conditions such as broken jumpers, loss of substation source, and lockout due to miscoordinated protective devices, isolates affected feeder sections, and restores power to unaffected sections to reduce outage times. With ability to automate up to 6 sources and 100 devices, system includes drag-and-drop IEC 61131 function block configuration software on SEL information processor.

Raritan Computer, Inc.
Somerset, NJ 08873
Jul 31, 2008 PM(TM) Series of Ethernet metered rack PDUs monitor power load on PDU in real time and provide advanced warning to protect against potential circuit overloads. Dominion® PX intelligent PDUs offer rack-level and outlet-level remote power monitoring and management, while RPC Series switched Rack PDUs support remote power on/off and power recycling control of individual outlets. Units come in ZeroU and 2U form factors and with variety of NEMA and IEC plugs and receptacles.

Transistor Devices, Inc.
Cedar Knolls, NJ 07927
Jul 22, 2008 Designed for use with remote, outdoor cabinets, 1U Power Center helps manage site performance by providing -54 V power, rated up to 1,000 W, and signals for flush fans, door alarms, and other environmental controls. Single rack unit offers 2 hot-pluggable 500 W rectifiers that convert 90-276 Vac into DC, which is distributed through up to 10 GMT fuses. Connection to external battery has optional circuit breaker and low voltage disconnect for optimizing safety and performance.

Power Distribution, Inc.
Richmond, VA 23223
Jul 21, 2008 Designed to fit on top of any manufacturer's power distribution unit, J Comm(TM) Retrofit for PDUs integrates branch circuit monitoring system and split core or solid core CT strips for up to 168 breakers. J Comm(TM) Retrofit for remote power panels fits on top of any manufacturer's power panel and integrates BCMS product and split or solid core CT strips for up to 168 breakers. J Comm(TM) Under floor Enclosure can be used for any installation including equipment already in field.

Weidmuller, Inc.
Richmond, VA 23236
Jun 16, 2008 Designed for industrial machinery applications such as conveyor and packaging equipment, FieldPower power distribution system consists of multiple all-in-one enclosed PowerBoxes (Standard, XL, Fuse, and On/Off) that incorporate Insulation Displacement Connection system to tap into uncut power cable and maintain IP 65 rating. Rated at 600 V/30 A/14-10 AWG, each PowerBox can be mounted at any point on machine with continuous, uncut 5-pole power cable placed inside.

Telect Inc.
Liberty Lake, WA 99019
Apr 16, 2008 Dual-feed 20/20-position panel (HPGMT20) and dual-feed 10/10-position front access panel (HPGMT10FA) are engineered for traditional telecommunications and next-gen applications. While former provides 20 total fuse positions per input bus in 1.75 in. of vertical rack space, latter locates all connections on front of panel for limited-access environments. Both configurations offer 100 A input per bus (200 A for panel); alarms for components located in bay; and up to 20 A GMT fuses.

Raritan Computer, Inc.
Somerset, NJ 08873
Apr 11, 2008 Controlled remotely via web browser or command line interface, Dominion® PX delivers remote and real-time outlet-level power and environmental monitoring to help companies determine actual power usage and capacity in their data centers, monitor rack temperature and humidity, as well as power sequence and manage IT equipment. Solution is offered in 16 self-contained models that range from 8-20 outlets, all of which offer various security features, including 256-bit AES encryption.