Ferraz Shawmut
Newburyport, MA 01950
Aug 25, 2008 Fused Selective Coordination Panel is UL67-listed panelboard that uses class CC Ultrasafe(TM) fuse holders with blown fuse indicators (fuses provided separately to suit specific loads during installation). Compact size and removable backpan facilitate installation. Capable of accomodating 12-42 circuits, panel features 100, 200, or 300 A copper main bus, and bonded ground bar and neutral bar with set-screw terminations.

Emerson Network Power
St. Louis, MO 63136
Aug 25, 2008 Able to connect up to three Liebert GXT2 10 kVA UPS units, Parallel POD provides adaptable power capacity and redundancy to support critical applications housed in small and mid-sized IT spaces. By paralleling units together, user can add 10 kVA of capacity and 10 kVA for redundancy, allowing multiple units to work together to deliver 16,000 W of protection. Devices provide on-line double-conversion protection, and can be serviced and maintained without shutting down load.

Schweitzer Engineering Laboratories Inc.
Pullman, WA 99163
Aug 06, 2008 SEL Distribution Automation Control System analyzes and detects permanent fault conditions such as broken jumpers, loss of substation source, and lockout due to miscoordinated protective devices, isolates affected feeder sections, and restores power to unaffected sections to reduce outage times. With ability to automate up to 6 sources and 100 devices, system includes drag-and-drop IEC 61131 function block configuration software on SEL information processor.

Raritan Computer, Inc.
Somerset, NJ 08873
Jul 31, 2008 PM(TM) Series of Ethernet metered rack PDUs monitor power load on PDU in real time and provide advanced warning to protect against potential circuit overloads. Dominion® PX intelligent PDUs offer rack-level and outlet-level remote power monitoring and management, while RPC Series switched Rack PDUs support remote power on/off and power recycling control of individual outlets. Units come in ZeroU and 2U form factors and with variety of NEMA and IEC plugs and receptacles.

Transistor Devices, Inc.
Cedar Knolls, NJ 07927
Jul 22, 2008 Designed for use with remote, outdoor cabinets, 1U Power Center helps manage site performance by providing -54 V power, rated up to 1,000 W, and signals for flush fans, door alarms, and other environmental controls. Single rack unit offers 2 hot-pluggable 500 W rectifiers that convert 90-276 Vac into DC, which is distributed through up to 10 GMT fuses. Connection to external battery has optional circuit breaker and low voltage disconnect for optimizing safety and performance.

Power Distribution, Inc.
Richmond, VA 23223
Jul 21, 2008 Designed to fit on top of any manufacturer's power distribution unit, J Comm(TM) Retrofit for PDUs integrates branch circuit monitoring system and split core or solid core CT strips for up to 168 breakers. J Comm(TM) Retrofit for remote power panels fits on top of any manufacturer's power panel and integrates BCMS product and split or solid core CT strips for up to 168 breakers. J Comm(TM) Under floor Enclosure can be used for any installation including equipment already in field.

Weidmuller, Inc.
Richmond, VA 23236
Jun 16, 2008 Designed for industrial machinery applications such as conveyor and packaging equipment, FieldPower power distribution system consists of multiple all-in-one enclosed PowerBoxes (Standard, XL, Fuse, and On/Off) that incorporate Insulation Displacement Connection system to tap into uncut power cable and maintain IP 65 rating. Rated at 600 V/30 A/14-10 AWG, each PowerBox can be mounted at any point on machine with continuous, uncut 5-pole power cable placed inside.

Telect Inc.
Liberty Lake, WA 99019
Apr 16, 2008 Dual-feed 20/20-position panel (HPGMT20) and dual-feed 10/10-position front access panel (HPGMT10FA) are engineered for traditional telecommunications and next-gen applications. While former provides 20 total fuse positions per input bus in 1.75 in. of vertical rack space, latter locates all connections on front of panel for limited-access environments. Both configurations offer 100 A input per bus (200 A for panel); alarms for components located in bay; and up to 20 A GMT fuses.

Raritan Computer, Inc.
Somerset, NJ 08873
Apr 11, 2008 Controlled remotely via web browser or command line interface, Dominion® PX delivers remote and real-time outlet-level power and environmental monitoring to help companies determine actual power usage and capacity in their data centers, monitor rack temperature and humidity, as well as power sequence and manage IT equipment. Solution is offered in 16 self-contained models that range from 8-20 outlets, all of which offer various security features, including 256-bit AES encryption.

Eaton Corp.
Cleveland, OH 44114
Apr 08, 2008 Powerware® Enclosure Power Distribution Units (ePDUs(TM)) with switched and managed function levels enable IT managers to address escalating power requirements with control and management capabilities in data centers or high-density rack environments. Along with metering, monitoring, and management capabilities, ePDUs offer receptacle level control, Web server interface, and support for user-defined sequencing of outlets as well as virtual grouping of outlets.

Power Distribution, Inc.
Richmond, VA 23223
Apr 03, 2008 Wavestar(TM) Mission Critical 500 KVA Power Distribution Unit (PDU) utilizes Wavestar(TM) monitoring system, which locally displays PDU critical functions and Branch Circuit Monitoring System and can communicate to building management system remotely via Modbus or SNMP. With front access design to allow infrared scans, it features low inrush transformer, compression lugs, plug-in style breakers, hinged panels with 2-point locks, and bus connections for transformer and circuit breakers.

Del City
Milwaukee, WI 53209
Mar 31, 2008 Serving as buss bars in confined areas, Power Distribution Blocks are manufactured from high-temperature reinforced plastic with 2 recessed mounting holes to minimize installation time. Units are equipped with tin-plated copper lugs, brass lugs, and standard lock washers to insure optimal performance in conductivity and corrosion resistance. Larger models can be used as method of lengthening battery cables.

Image Industries, Inc.
Huntley, IL 60142
Mar 17, 2008 Offering full range of weld stud fasteners and equipment including arc weld studs, capacitive discharge weld studs, and cable management studs, POWERfast(TM) System withstands harsh environments and is suited for isolation bushings, grounding lugs, and other access panel applications. System also includes hinge pins, security bolts, door rods, and paint stripping nuts.

Tripp Lite
Chicago, IL 60609
Feb 29, 2008 Supplied with PowerAlert software for central monitoring and configuration, power distribution units (PDUs) are available with digital load meter or switched architecture. Most models feature built-in network interface that lets users remotely monitor and control individual outlets and connected devices via SNMP, Web, or Telnet. Available with ratings from 15-30 A, range of products includes 120, 208, and 208/230 V models with 8, 16, 24, or 38 outlets.

Hewlett Packard
Houston, TX 77269-2000
Jan 30, 2008 Delivering power distribution at row level, HP Power Distribution Rack can provide 400 A redundantly. Fully redundant inputs and outputs provide dependable power while protecting IT hardware with commercial grade circuit breakers, while individual branch circuit monitoring and redundant management modules provide status and power consumption of each attached rack. Supplied in one HP 10000 G2 42U rack, solution features 3-phase power feeds and redundant 42-pole circuit breaker panels.

Telect Inc.
Liberty Lake, WA 99019
Dec 24, 2007 Engineered for high-amperage power distribution applications in communications networks, TPA/GMT fuse panel functions in ±24 or -48 V networks. Two rack unit high panel fits 8 TPA fuse position per power feed, with each position able to handle 50 A fuse. Unit also integrates 20 GMT fuse positions (10 per feed) for power distribution to traditional low-current equipment. Input power terminals accept 2-hole compression lugs for up to 750 MCM cabling.

Weidmuller, Inc.
Richmond, VA 23236
Oct 31, 2007 Available in 1-, 2-, and 3-pole configurations, WSI 25 fuse terminal blocks accept 13/32 x 1.5 in. Class CC fuses and have Short Circuit Current Rating (SCCR) of 200 kA. Each DIN rail mount fuse terminal block is touch-safe and accepts multiple wire inputs from 18-4 AWG. Able to accommodate various fuse ratings, products also have integrated rejection feature that prevents insertion of lower-rated or non-Class CC fuse. They are UL- and CSA-rated to 600 V, 30 A.

IAC Industries
Brea, CA 92821 2926
Oct 25, 2007 Dimension 4 workstations are available with optional Power Distribution System, which lets user swap duplex outlet modules on-the-fly to provide access to one of 3 separate 20 A circuits. Up to 6 separate duplex receptacle module locations are provided on single Dimension 4 upright. Users exchange numbered duplex receptacles to access separate power circuits. Modular workstations can be assembled as standalone unit or strung together to form any type of cellular work area required.

Phoenix Contact
Harrisburg, PA 17111 0100
Oct 15, 2007 Built to IP67, EMC-protected DUPLICON distributes energy in large-scale machinery and systems. It has 6 positions plus ground in 24-12 AWG for 600 V/25 A. Solution is available with T-Box, which offers contact insert with 2 screw connections per terminal for looping power cable. Cable outlet, on additional stacked housing on T-Box set, can be plugged in any of 4 directions. Available M12 Adapter Cover features 4 M12 five-position connectors and can be used as double occupied.

Eaton Corp.
Cleveland, OH 44114
Oct 10, 2007 Available for single- and 3-phase applications up to 17 kW, Powerware® Enclosure Power Distribution Units (ePDU(TM)) are designed for mixed IT environments. They complement UPSs distributing power to up to 45 receptacles per ePDU, and feature user-selectable combination of NEMA, IEC, or hardwired inputs and NEMA and IEC output receptacles. PDUs support remote monitoring and management, and offer flexible mounting options including 1U, 0U, and wall/floor mounting.