Hawk Measurement America
Phoenix, AZ 85009
Jun 17, 2008 Suitable for liquids or solids, Gladiator Vibration Smart Switch's sensing element includes 2 prongs or vanes that when free to vibrate are driven to their resonant frequency by piezo ceramic elements. As level of material to be sensed rises, electronics sense change in prong movement and produce output which can be used for indication or control. Probe can be separated from amplifier by up to 500 m, and high temperature extension allows unit to handle process temperatures up to 150°C.

LGInternational
Portland, OR 97224
Jun 16, 2008 Custom membrane and thin film switches are intended for medical and electronic devices as well as automotive, industrial, and consumer electronics. Available in range of products, from 3D rubberized keypads to 2D thin film switches, with options for complex circuitry, components, lighting, and tactile feedback, they switches offer solution for harsh environments, EMI/RFI/ESD shielding, prototyping, high use, and aesthetic requirements.

Weidmuller, Inc.
Richmond, VA 23236
Jun 16, 2008 Designed for industrial machinery applications such as conveyor and packaging equipment, FieldPower power distribution system consists of multiple all-in-one enclosed PowerBoxes (Standard, XL, Fuse, and On/Off) that incorporate Insulation Displacement Connection system to tap into uncut power cable and maintain IP 65 rating. Rated at 600 V/30 A/14-10 AWG, each PowerBox can be mounted at any point on machine with continuous, uncut 5-pole power cable placed inside.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jun 16, 2008 Including power monitoring feature to keep average optical power constant during temperature changes, model SY88212L is single-supply, 3.3 V laser driver. Device is suited for datacom and telecom applications, such as LAN and MAN, with any data rates up to 2.5 Gbps. Designed with high compliance voltage, IC can be dc-coupled to laser to reduce external component count and power consumption. Applications include FC, GbE, SONET, OC3/12/24/48, SDH, and STM 1/4/8, as well as SFF and SFP modules.

Allegro MicroSystems Inc.
Worcester, MA 01615
Jun 11, 2008 Offered in reverse battery protected packages, temperature-stable and stress-resistant latches have dynamic offset cancellation that reduces residual offset voltage. On single silicon chip, Models A3290 and A3291 include Hall-voltage transducer, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit protected open-collector output to sink up to 25 mA. Onboard regulator allows operation with 4.2-24 V supply voltages with -40 to 125°C operating temperatures.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jun 09, 2008 Offering contact arrangement options of SPST N.O., and SPST N.C., A2S Series features mounting bracket and quick connect termination of 6.3 to .250 mm. Units have contact resistance of less than 30 mW, insulation resistance of 100 MW at 500 Vdc, and shock resistance of 147 m/s² for 11 minutes with vibration resistance of 1.5 mm double amplitude 10-40 Hz. Measuring 35.7 x 35.7 x 66.2 mm, relays have operating temperature of -40 to 85°C and storage temperature of -40 to 155°C.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 06, 2008 Model 7239 16-Channel RJ45 A/B Switch allows capability of accessing, on each channel, one of 2 separate devices via device connected into channel's common port. It offers remote access via RS232 port or front panel push button control. Switches can change position simultaneously upon command. All 8 pins of each switch port are transparent to all data.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 06, 2008 Using Telnet commands or GUI, Model 7352 Dual CAT5e RJ45 A/B/OFF-LINE Switch offers password protected remote access via 10/100 Base-T LAN Ethernet environment to monitor status and control switch functions. It has 2 channels, each allowing ability to share single device connected to COMMON port among 2 other devices connected to A and B ports or to be switched off line for complete isolation. Switched signals are passed via latching copper contact relays.

Allegro MicroSystems Inc.
Worcester, MA 01615
Jun 05, 2008 Model A3941 automotive grade MOSFET pre-driver IC is developed for industrial systems utilizing 24 V battery. Capable of driving 4 external N-Channel MOSFETs in full-bridge configuration, it is used in brush dc motor drive applications where high-currents in combination with high ambient temperatures require use of external MOSFETs. IC is rated over full automotive temperature range of -40 to 150°C and full battery supply range of 7-50 V.

Phaseda LLC
Beaverton, OR 97005
Jun 04, 2008 Approved under UL1077 as supplementary protector with rating up to 18 A, 125 Vac, DLQ3-Series thermal circuit breaker features rocker switch on/off function and offers red, green, or opaque illumination options. RoHS-compliant solution snaps into industrial panel cut-out, and terminals come in standard quick connect or solder lug for different applications. Product also provides over-current protection with UL and cUL Marking.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jun 03, 2008 Available for pressure, vacuum, and differential applications, PDPS Series incorporates large diameter diaphragm and snap action switch to optimize dependability and reliability (±0.02 in. of wc). Solution is factory preset for pressures from 0.07-1.0 in. wc and handles temperatures from -40 to 185°F. Features include multi-barb port connections, inherent mounting, and quick-disconnect terminals.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jun 03, 2008 Designed for CDMA handsets where multiple transceiver or GPS functions are connected to common antenna, MASW-008853 has typical insertion loss at 1.0 GHz of 0.30 dB with isolation of 25 dB and P0.1dB of 38 dBm. It is fabricated on 0.5 micron gate-length GaAs process and features full passivity. Offering low leakage current, unit maximizes system linearity performance, while reducing dc power consumption. Each switch is RF tested to ensure performance compliance.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 02, 2008 Enabling sharing of single port HD-15 interface device connected to COMMON port among 8 other devices, Model 7810 single-channel, 8-position switch is password-protected for 10 BaseT/100 Base TX LAN access. Point and click operation allows user to monitor switch status, control switch functions, lock/unlock front-panel access, and configure LAN access port. All switch signals pass through copper contact relays that maintain their position and continuity in event of power loss.

Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Jun 02, 2008 Featuring metal heads with axial rotation in any of 4 positions at 90° angles, IEC Limit Switch comes with removable body cover that has captive closing screw and is hinged at bottom. Auxiliary contact blocks are removable to simplify wiring and body housing is made of self-extinguishing polymer thermoplastic. UL approved switch is available with range of operating heads such as roller plunger, push lever, roller lever, and wobble stick.

Harting KGaA
  Germany
Jun 02, 2008 Enabling administration of entire network, mCon 1000 Series of industrial switches comply with DIN EN 61850-3 and are approved for use in power distribution and wind energy communication networks. Up to 10 Ethernet nodes can be attached via twisted pair/fiber optic cable to Fast Ethernet and Gigabit Ethernet switches. Protection class, temperature range, and mechanical stability ensure dependability in demanding industrial environments.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Jun 02, 2008 With RoHS lead free AgSnO2 contacts, Automotive A4 Series relays offer contact arrangement options of SPST N.O. and SPDT. They have contact resistance of less than 30 mW, switching power of 280 W on single and 2 x 280 on dual package, and switching voltage of 380 Vac, 75 Vdc. Other features include insulation resistance of 100 mW at 500 Vdc, and shock resistance of 100 m/s² for 11 minutes with vibration resistance of 1.27 mm double amplitude 10-40 Hz.

Tundra Semiconductor Corp.
Kanata, ON K2K2M5  Canada
Jun 02, 2008 Consuming 120-200 mW per port, Tsi572(TM) Serial RapidIO® Switch allows System OEMs to use RapidIO x1 ports for processor aggregation on AMCs and RapidIO x4 port for interface to AMC.4 backplane. Solution offers scalability, hardware multicast, and low latency (110 ns, cut through) functionality for wireless, wireline, and imaging/video applications. Compliant with RapidIO 1.3 specification, this 21 x 21 RapidIO Switch offers 30 Gbps of non-blocking full duplex bandwidth.

Omega Engineering, Inc.
Stamford, CT 06907
Jun 02, 2008 Designed with plastic construction and mounted to rigid portion of machine, E48 DIN-style safety key interlock limit switch can be used with movable guards or covers which must be closed for operational safety. Key is removed from switch when guard is opened, positively breaking normally-closed contacts to reduce risk and safeguard workplace. CE compliant switch is suited for any industry that uses factory automation machines including automotive, food, and textile.

K-Tek
Prairieville, LA 70769
Jun 02, 2008 Measuring liquid levels to 32.8 ft and bulk solids to 16 ft, KSONIK MICRO supplies 4-20 mA output for remote indication or remote control; SPDT relay can be used to activate alarms and pumps. Ultrasonic device utilizes Variable GAP technology, which adjusts gain, amplitude, and power to ensure accurate measurement by always working with smallest return signal. Housed in IP65 polycarbonate enclosure, integrated display provides access to detailed readings.

Electro Standards Laboratories
Cranston, RI 02921 3403
Jun 02, 2008 With rack dimensions of 19 x 8.75 x 13.0 in., Model 9741 high-density RJ45 A/B, 1000Base-T, Cat5e switch allows user to select 8, 16, 24, 32, or 40 channels to be populated. It features backup switching capability for data network, and accommodates up to 40 channels in 8.75 in. of panel height. A, B, and Common connectors are on rear panel, while two-position rotary switches are on front panel. All 8 pins are switched which allows for compatibility with all RJ-45 interfaces.