American Power Conversion
West Kingston, RI 02892
Sep 29, 2008 Fuel Cell Extended Run (FCXR) product provides hydrogen-based backup power for InfraStruXure® data center solution, which fully integrates power, cooling, environmental monitoring, and management in rack-optimized design. Using air and stored hydrogen, FCXR product delivers emission-free electrical backup power and scales onsite with 1-3, 10 kW modules contained in one 19 in. rack. It uses Hydrogenics' HyPM XR Fuel Cell Power Modules and supports 3-Phase Symmetra PX product line.

Fairchild Semiconductor
San Jose, CA 95134
Aug 01, 2008 Model FXL2SD106 has built-in automatic direction control that allows device to sense and control direction data should flow. Along with ESD protection on B side of 12 kV, it also offers output enable control feature that allows designers to disable outputs to save power when product is not in use. FXL2SD106 is packaged in 2.5 x 3.5, 16-pin DQFN packaging that features no signal pins in center, allowing designers to easily bond this package to board.

Maxell Corporation of America
Fair Lawn,, NJ 07410
Apr 03, 2008 Resistant to acidic environments, catalyst is gold-platinum (AuPt) nano-particle, 2-3 nm in size, used for oxygen-reduction reactions at cathode of polymer electrolyte fuel cell (PEFC). Solution has high-activity structure in which gold and platinum are not fully alloyed.

Fairchild Semiconductor
San Jose, CA 95134
Aug 17, 2007 Available in compact, 2.5 x 3.5 mm, 16-terminal DQFN packaging, Model FXL4TD245 4-bit, low voltage dual-supply voltage translator offers design flexibility with independent-direction controls for each bit. It features voltage range of 1.1-3.6 V for accommodating requirements of variety of consumer and industrial applications. Unit is fully configurable; A port tracks level of VCCA supply and B port tracks level of VCCB supply.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 16, 2007 Suited for high-speed data transfer between low-voltage ASICs/PLDs and higher voltage systems, Models MAX13042E-MAX13045E provide necessary level shifting by operating with VL voltages from 1.62-3.2 V and VCC voltages from 2.2-3.6 V. Over these operating-voltage ranges, they provide data rate of 100 Mbps with external push-pull or open-drain drivers that source 4 mA output current. Units are available in 3 x 3 mm, 14-pin TDFN and 1.54 x 2.12 mm, 12-bump UCSP packages.

Fairchild Semiconductor
San Jose, CA 95134
Aug 07, 2007 Designed for ultra-portable, computing, communication, and industrial applications, Model FXLH1T45 seamlessly interfaces processors to electronic subsystems operating at different voltage levels by providing both uni- and bi-directional translation. Available in 1.0 x 1.45 mm 6-terminal MicroPak(TM) package, unit's bushold on data outputs eliminates need for external pull-up or pull-down resistors. RoHS-compliant product meets J-STD-020 Pb-free reflow requirements.

Texas Instruments Inc. / Tiris Division
Dallas, TX 75243
Feb 06, 2007 Models TXB0104 and TXS0104E voltage-level 4-bit translators eliminate need for direction control signals and help improve connectivity between processors and peripherals. Designed for SD card interface via SD 1-bit mode or SPI mode applications, Model TXB0104 provides universal low-voltage translation between 1.2, 1.5, 1.8, 2.5, 3.3, and 5 V nodes. Model TXS0104E offers translation between 1.8, 2.5, 3.3, and 5 V voltage nodes, and suits open drain applications.

MTI Instruments Inc.
Albany, NY 12205
Dec 14, 2006 With 1 fuel cell and 3 easy-to-swap 100% methanol fuel cartridges, Mobion® 30M system delivers energy of 11 primary BA5590 batteries while weighing one-third less. Hybrid fuel cell and battery system provides instant peak power of 120 W and long-lasting continuous power of 30 W. Since methanol is biodegradable, there are no special disposal requirements.

Jadoo Power Systems, Inc.
Folsom, CA 95630
Oct 06, 2006 Hot-swappable XRT provides critical support power when grid is unavailable or unreliable. In addition to 6 N-Stor360 fuel canisters that provide up to 2,200 W-hr of runtime, fully configured mobile fuel cell power package includes one 100 W N-Gen fuel cell power unit, 110 Vac and 12 Vdc outputs, and digital state-of-fill indicator. Uses for this 50 lb unit include recharging portable radio and laptop batteries or powering emergency lighting.

Protonex Technology Corp.
Southborough, MA 01772-1034
Oct 02, 2006 ProCore(TM) unmanned aerial vehicle (UAV) propulsion system combines fuel cell technology with chemical hydride fueling solution for hydrogen generation based on Millennium Cell's Hydrogen on Demand® technology. Enabling extended flight times and ability to carry greater payload, system suits UAVs designed for surveillance, chemical-biological monitoring, and border patrol.

Ener1, Inc.
Ft. Lauderdale, FL 33309
Aug 15, 2006 Designed for proton exchange membrane (PEM) fuel cell systems, solid-state EnerFuel EFH-100 series utilizes hollow fiber material designed to optimize overall durability. Product delivers optimal humidification irrespective of flow rates and is vibration-tolerant. Units with Air-to-Air and Water-to-Air modes of operation are available.

Jadoo Power Systems, Inc.
Folsom, CA 95630
May 19, 2006 Designed for mobile or independent user, single-port FillOne(TM) Refill Station weighs 3 lb and is capable of operating with 12 Vdc voltage input. PowerBase(TM) support stand readies fuel cell power unit for use in field or on bench. Combined with N-Stor360(TM) canister that delivers 360 W hours of energy, users have everything needed to use fuel cell power with variety of applications, including field-ready laptops and emergency response radios.

ReliOn
Spokane, WA 99216
May 10, 2006 Utilizing Modular Cartridge Technology®, Model T-1000(TM) provides power architectures from under 600 W to 1,200 W, while Model T-2000(TM) provides up to 2,000 W and can be configured to work in combination for power requirements up to 12 kW. Modular electronics cards allow scalability and redundancy, as well as configuration to either 24 or 48 V applications. Both products provide backup dc power required by telecommunications networks, while eliminating lead acid batteries.

Voller Energy Group PLC
Hampshire   United Kingdom
May 09, 2006 Powered by hydrogen gas, Model VE100 Rack Mount uses software to log and monitor battery charge and automatically awakens from standby mode to charge external batteries when they drop below preset voltage. Information can be accessed and monitored remotely via GPS phone link. Automatic charge mode, fuel canister reset, and various display modes can be selected from front panel. Pipe connection is provided for ducting away moist air and water vapor.

Northwest Power Systems
Bend, OR 97701
Mar 01, 2006 Developed to address needs of telecommunications and UPS backup power needs, ElectraGen(TM)3 helps improve system reliability and lends to predictable performance in various climates. Hydrogen-based proton exchange membrane (PEM) fuel cell solution is CE-certified and produces up to 3 kW of clean backup power. Units have life expectancy of 10 years.

Jadoo Power Systems, Inc.
Folsom, CA 95630
Jan 20, 2006 NABII power unit, N-Stor(TM) fuel canister, and FillPoint(TM) refill station offer digital interface for state-of-fill and other fuel management data. Suited for equipment used in off-grid power situations, products are hot-swap capable to ensure that power never goes down. Applications include field-ready laptops, emergency response radios, professional broadcast cameras, mobile responders, and law enforcement.

Northwest Power Systems
Bend, OR 97701
Dec 23, 2005 Working with hydrogen-fueled ElectraGen(TM) backup power systems, Extended Run Module converts liquid fuel into pure hydrogen to provide power in event of grid failure. System replaces multiple hydrogen cylinders, eliminating need for hydrogen storage when onsite storage is not feasible. Designed for autonomous operation, 250 W portable iGen(TM) proton exchange membrane with on-board fuel reformer, generates power continuously as long as fuel is supplied to system.

VIASPACE
Altadena, CA 91001
Aug 15, 2005 Plastic-based Methanol Fuel Cartridge provides energy source for portable electronic devices powered by direct methanol fuel cells. Cells may be instantaneously recharged by replacing disposable fuel cartridge. Cartridge containing 50 cm³ of methanol can power laptop for 5 or more hours compared to 10 minutes using alkaline battery.

American Power Conversion
West Kingston, RI 02892
Jul 08, 2005 Suited for IT applications with high availability requirements, InfraStruXureâ„¢ with Integrated Fuel Cells utilizes architecture that integrates power, cooling, management, and services in rack-optimized design. It incorporates modular polymer electrolyte membrane (PEM) fuel cells and allows IT project managers to stack up to three 10 kW modules per rack for scalable solution. Energy is stored and supplied to system via bottled hydrogen.

Paslode, An Illinois Tool Works Co.
Vernon Hills, IL 60061
Mar 03, 2004 Quik Paks each contain 1,000 or 2,000 fasteners plus equivalent amount of 2-step fuel cells for cordless trim tools such as Straight 16 Gauge Finish Nailer, Angled 16 Gauge Finish Nailer, and 18 Gauge Finish Nailer. Paks provide various fastener sizes including 5/8, 1, 1¼, 1½, and 2 in. for 18 gauge tool and 1¼, 1½, 1¾, 2, and 2½ in. for angled 16 gauge and straight 16 gauge tools.