Power Strips

Electrical Equipment & Systems, Electronic Components & Devices

WSLF2512 Power Metal Strip Resistor minimizes power loss.

November 12, 2016

Featuring high power rating, TCR down to ±70 ppm/°C, low resistance 0.0003 Ω, WSLF2512 Power Metal Strip Resistor ensures stable and accurate current measurements. Designed in metal nickel-chrome, manganese-copper, or manganese-copper-tin alloy resistive element with low TCR, unit produces resistance values ranging from 0.0003 Ω to 0.003 Ω. Operated in -65 °C to +170 °C temperature, WSLF2512 provides low thermal EMF (<3 μV/°C) and inductance (<2 nH).

Read More

Electrical Equipment & Systems

Medical-Grade Power Strip has 25 ft cord, 20 A plug, 6 outlets.

December 14, 2015

Approved for use in patient-care vicinities, PS625HG20AOEM mounts to IV poles, crash carts, and other mobile equipment. NEMA 5-20P-HG hospital-grade plug and NEMA 5-20R-HG hospital-grade outlets comply with UL 1363A specifications, while 25 ft, 12 gauge power cord promotes flexible placement of connected equipment to patients. Two industrial-grade, resettable, 20 A circuit breakers protect sensitive components from overloads and short circuits. Read More

Electrical Equipment & Systems

Data Center Power Strips feature upgradeable design.

March 5, 2014

Incorporating hot-swappable Interchangeable Monitoring Device in standard power strip design, Upgradeable Power Strips offer scalable monitoring features that evolve with demands of data center. Power strips can be daisy chained using standard Ethernet protocol to minimize usage of switch ports. Tested to ANSI and IEC standards, units include rotatable LED display, locking receptacles to protect against vibration, and low profile breakers for installation in tight spaces. Read More

Electrical Equipment & Systems, Health, Medical and Dental Supplies & Equipment

Medical-Grade Power Strips can be used in patient-care areas.

March 13, 2013

Intended for use in health care facilities, Medical-Grade Power Strips are UL 60601-1, UL 60950-1, and UL 1363A compliant and include surge-protective models that conform to UL 1449 third edition requirements. Locking safety covers prevent accidental contact with unused outlets, and switchless design prevents accidental disruption of power. Configurations are available with 2, 4, or 6 hospital grade outlets and with 7 or 15 in. supply cord lengths with hospital-grade attachment plugs. Read More

Architectural and Civil Engineering Products, Electrical Equipment & Systems

AC Power Strip Outlet Module supports USB communications.

March 1, 2013

Rated 8 A @ 240 Vac, JSB2871 series provides DPST relay with output that feeds AC power outlet. Wire connection to relay module is made with on-board screw type terminals, and any standard AC line cord plugged into outlet can be controlled by USB commands. Replaceable fuse protects relay and AC line, and options for relay board include AC detection of either input or output power. SFF module replaces internal PC-based plug-in cards in test/control/monitoring/measurement applications. Read More

Electrical Equipment & Systems

Power Strip features built-in wireless monitoring.

March 28, 2012

PWM intelligent wireless power strip integrates Packet Power's wireless power and temperature monitoring technology, which provides remote view of power usage. Without any additional cords, it transmits data and offers wireless access to strip's amp, volt, frequency, volt-amp, watt, kWh, power factor, and temperature measurements. Wireless transfer of information to single collection point allows entire power monitoring network to reside on one IP address. Read More

Electrical Equipment & Systems, Software

WAGO ProServe Engineering and Design Suite

April 8, 2011

GERMANTOWN, WI - April 2011 - New, exclusive marking strips and online video tutorials augment WAGO Corporation's ProServe design software suite and marking capabilities. ProServe professional-grade software combines design and engineering tasks with WAGO's entire product portfolio to create custom assemblies. WAGO TOPJOBS Custom Marking Strips: Created exclusively for WAGO by DYMO, 11mm-wide...Read More

Electrical Equipment & Systems

Power Strip has 6 circuit-protected outlets, 2 always on.

November 10, 2010

As 33 in., 0 RU power strip, 72A-115BTHEN-00 features 8 C13 receptacles, 2 always-on outputs to accommodate devices in need of continuous power supply, and 6 individual protected outputs (UL 489-Listed) operated by individual on/off circuit breaker switches. It distributes 3.45 KVA power output and can be mounted vertically in standard 19 in. rack or horizontally via optional adaptor brackets. LED power-on indicators, independent to each outlet circuit breaker, are also standard. Read More

Electrical Equipment & Systems

Power Strip incorporates field wiring terminal block.

November 10, 2010

Designed to meet basic power and field installation needs, 72A-120NSLBN-00 offers twelve 5-20R outlets outputting total combined load of 16 A. It is constructed with Euro-Style terminal block that accepts up to 12 ga wires; line, neutral, and ground for simplified field installation. Mounted vertically in standard 19 in. rack or horizontally via optional adapter brackets, this 18 in. power strip is suited for kiosks, charging docks/carts, or A/V control centers. Read More

Electrical Equipment & Systems

Rackmount Powerstrip PDU offers power, environmental monitoring.

August 12, 2010

Available in 15 and 20 A versions, Geist RacSense® Master (RSM) Series combines power distribution, power and environmental monitoring, and remote alarming to address data center issues. Rackmount and vertical configurations are available to fit any data center placement, and products are also able to detect hot spots and humidity problems. Depending on model, number of outlets can be 10, 12, 24, or 30, and physical dimensions range from 17 x 4.5 x 1.72 in. to 66.25 x 2 x 2 in. Read More

Electrical Equipment & Systems

Medical Socket Strip has 4 NEMA hospital grade outlets.

October 20, 2009

Medical Socket Strip is rated for maximum of 15 A with service at 125 V and features manual reset circuit breaker. Designed to be permanently attached to fixture, such as cart or some other type of item in hospital or dentist office, product has attached hospital grade power cord that can be ordered in lengths up to maximum of 25 ft. Outlet covers can also be attached as optional feature. Read More

Electrical Equipment & Systems

Medical Socket Strip has 6 NEMA hospital grade outlets.

October 20, 2009

Medical Socket Strip is rated for maximum of 15 A with service at 125 V and features manual reset circuit breaker. Designed to be permanently attached to fixture, such as cart or some other type of item in hospital or dentist office, product has attached hospital grade power cord that can be ordered in lengths up to maximum of 25 ft. Outlet covers can also be attached as optional feature. Read More

Electrical Equipment & Systems

Power Strip distributes 400 Vdc to up to 12 appliances.

July 28, 2009

Hardwired into main power infrastructure, Model 74D-160FRLGN-00 provides power via 3 load banks, each featuring four 400 Vdc Anderson Power Products receptacles, one 2-pole 20 A fuse, and LED status indicator. Total current is 60 A max. Housed in slim 0U package, strip saves space for other critical devices. Read More

Electrical Equipment & Systems

Interlocking Fused Terminal Strips

March 9, 2009

OKW Electronics has launched the new CFTBN series fused terminal strips from Camden Electronics. Perfect for wiring lighting equipment, power supplies, fire and security systems, domestic equipment etc., the new CFTBN series has UL, CSA, IMQ and VDE approvals. For ease of use, these terminal strips incorporate a spare fuse option in the fuse carrier allowing technicians to immediately locate a...Read More

Electrical Equipment & Systems

Tripp Lite Receives Patent on First Power Strip Approved for Hospital/Medical Patient Care Areas

June 30, 2008

Chicago, IL (June 23, 2008) - Tripp Lite, a world-leading manufacturer of power protection equipment, is pleased to announce that their model PS-415-HGULTRA (the first Medical-Grade Power Strip with full UL 60601-1/60950-1 compliance) has been awarded U.S. Patent No. 7,375,939. "The PS-415-HGULTRA was the first power strip of its kind to be agency-approved for use in patient care areas," said...Read More

Electrical Equipment & Systems, Health, Medical and Dental Supplies & Equipment

Medical-Grade Power Strips suit movable equipment.

February 20, 2008

Compliant with UL 1363a standards, 4-outlet Model PS-415-HG-OEM and 6-outlet Model PS-615-HG-OEM are designed as components of larger system, such as mobile medical carts or IV poles. Each features NEMA 5-15R-HG hospital-grade receptacles, all-metal case, and 15-ft ac power cord with NEMA 5-15P-HG hospital-grade plug, as well as 2 built-in 15 A resettable circuit breakers and switchless design to prevent accidental shutoff. Read More

Electrical Equipment & Systems

Dual-Barrier Strips suit PCB-mounted applications.

February 20, 2006

Molded to length with 0.325 in. centerline, BUCHANAN barrier strips feature high-rise design that allows for dual-level wire entry on PC boards. They provide captive screws in 2-16 wire-ready positions and can be equipped with quick-connect tabs and jumpers. Meeting UL and CSA standards of 20 A, 300 Vac/dc, they accommodate solid/stranded wire ranging from 12-22 AWG, and deliver operating temperature range of -40 to +221°F. Read More

Electrical Equipment & Systems, Health, Medical and Dental Supplies & Equipment

Power Outlet Strip is approved for medical facilities.

June 2, 2005

Incorporating double-fault safety protection and tested to US and Canadian safety standards, Model PS-615-HGULTRA provides power distribution solution with six NEMA 5-15R hospital-grade receptacles, permitting multiple items of electrical equipment to be operated in rooms with only single duplex outlet. Unit features all-metal case, 15 ft AC power cord, built-in resettable circuit breaker, and switchless design to prevent accidental shutoff. Read More