Fil-Coil Filters
Central Islip, NY 11722
Apr 18, 2008 Offering hermetically sealed filter solution, FCL-660 Series RFI/EMC filters are available for 5-300 A circuits. Nosie interference filters are designed for low level interference and are suitable for use in screen rooms, medical apparatus, induction heaters, and other noise generating equipment.

Schurter, Inc.
Santa Rosa, CA 95403
Mar 25, 2008 Series 5003 ECO includes screw mount version for front or rear mounting to chassis as well as snap-in version that features AMP Universal MATE-N-LOK and Molex HCS-125 connectors encased with single stage filter rated up to 15 A at 125 Vdc. EMI filter provides wideband attenuation in frequencies ranging from 100 kHz to 30 MHz. Offered in lightweight and environmentally friendly compact package, dc power entry module is ENEC and cURs approved and complies with IEC/EN 60950 standard.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Mar 20, 2008 CORCOM single- and 3-phase filters, offered in variety of series, meet performance requirements for conducted noise and are designed for high-current (30-400 A) applications. Offering elevated insertion loss over 10 kHz to 30 MHz range, products aid in immunity/susceptibility compliance. All BCF, FCD, and CFN series filters are delta wound and offer voltage ratings of 277/480 VAC. Model 60VS6 of S series single-phase power line filter is rated 250 Vac.

Schurter, Inc.
Santa Rosa, CA 95403
Feb 26, 2008 Available with current ratings of 20 A or 16 A, depending on attenuation requirements, 5130 ECO IEC Inlet meets demands of IT, medical, and industrial applications. Positive electrical contact of metal flange or snap arms to chassis ensures optimal filtering and shielding. Flange version is available for front or rear mounting with traditional screws and nuts or rivet mounting. For rear mounting only, version is available with pre-formed threaded holes for M3 screws.

STMicroelectronics
Carrollton, TX 75006
Feb 13, 2008 Housed in 0.6 mm high SOT883 package with 1.0 x 0.6 mm footprint, Model EMIF01-1003M3 is designed for single-line applications. Dual-channel Model EMIF02-1003M6 comes in 1.0 x 1.45 mm Micro QFN package with mounted height of 0.55 mm. Both devices achieve 15 kV air discharge and 8 kV contact discharge, in accordance with IEC61000-4-2 specification. When subjected to 15 kV ESD strike, Model EMIF01 delivers 9 V clamping voltage and Model EMIF02 provides 17 V.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 08, 2008 Housed in LLPXX13 leadless package with 0.6 mm profile, VEMI Series comes in 4-, 6-, and 8-channel models with typical cut-off frequencies of 130 and 240 MHz and resistance of 100 W. Compliant with RoHS 2002/95/EC and WEEE 2002/96/EC, filters provide protection in portable electronics for mobile computing, mobile communications, industrial, and medical applications.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Feb 05, 2008 Available with current ratings of 10, 15, and 20 A, chassis-mount RK series uses single-stage filtering to achieve differential mode performance required in industrial machinery in noisy environments. Leakage current of 0.16 mA @ 120 Vac/60 Hz also makes these filters suited for portable equipment. Rated for voltages up to 250 Vac, products are designed for global applications. They are UL-Recognized, CSA-Certified, and VDE-Approved.

TDK Corporation of America
Mount Prospect, IL 60056
Jan 30, 2008 Models ZCAT08V-BK and ZCAT12V-BK counter effects of electromagnetic noise on cables that link various onboard electronic control units. Structure consists of vertically split cylindrical ferrite core with integrated resin case for mounting on cables. Resin case and core material are resistant to heat (-40 to +125°C) and shock. Offering 120 and 140 ohms impedance, respectively, ZCAT08V-BK is 33 mm long with 8 mm ID and 18 mm OD and ZCAT12V-BK is 35 mm long with 27 mm OD and 12 mm OD.

Schaffner EMC, Inc.
Edison, NJ 08837
Jan 23, 2008 Offering high symmetrical and asymmetrical attenuation performance, FN9233 IEC inlet filter series is designed for devices and switching power supply units that require high level of interference suppression. Featuring maximum continuous operating voltage of 250 Vac, 50/60 Hz, frequency range of dc to 400 Hz, and current rating of 1-15 A at 40°C. With choice of output connections and mounting options, series includes snap-in versions and standard or wide mounting flanges.

Schaffner EMC, Inc.
Edison, NJ 08837
Jan 09, 2008 Featuring earth link choke, Model FN9222E targets applications requiring optimized attenuation performance or additional attenuation on ground wire. Unit is suited for max continuous operating voltage of 250 Vac, and is rated from 1-15 A at 50°C with operating frequency of DC-400 Hz and temperature range of -25 to +85°C. Featuring traditional screw mounting, filter supports electrical, household appliance, test and measurement, and electric data processing applications.

California Micro Devices
Milpitas, CA 95035
Dec 14, 2007 Based on Praetorian II architecture, Series CM1692 inductor-capacitor (LC) filters include CM1692-04DE, CM1692-06DE, and CM1692-08DE lead-free models. Units offer high cutoff frequencies of up to 400 MHz, stop band ranging from 800 MHz up to 3 GHz that covers all wireless communication frequencies, 2 nsec rise time, less than -2 dB insertion loss, and ESD protection up to ±15 kV contact discharge per IEC61000-4-2 Level 4 specification.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Dec 11, 2007 Model 60VS6 60 A filter combines common mode interference rejection with circuitry to reduce differential mode noise and transients. Measuring 7.2 x 3.08 x 2.28 in., multistage package includes terminals for line and load connections. Filter is designed for use in 120 Vac 60 Hz/250 Vac 50 Hz applications such as industrial frequency inverters, motor drives, and switch-mode power supplies. It features UL Recognition, CSA Certification, and VDE Approval.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Nov 26, 2007 CORCOM CFN series universal, 3-phase power line filters help electrical equipment comply with EMI requirements as well as aid in immunity and susceptibility compliance. Designed for delta wiring, UL recognized 400 CFN filters are rated for continuous operation at 400 A and 277/480 V 50/60 Hz. Maximum leakage current at 10% unsymmetrical mains line to ground is 5.0 mA at 120 Vac/60 Hz and 9.6 mA at 277 Vac/50 Hz.

Spectrum Control, Inc.
Fairview, PA 16415
Sep 07, 2007 Available with M3 x 0.5 feed-thru circuit and M4 x 0.7 Pi circuit, Metric EMI Filters feature current rating of 10 A, voltage rating of 100 Vdc, and dielectric withstanding voltage of 250 Vdc. Units can be mounted in tapped hole or thru-hole and have hex head dimension across flats of 4.0 mm. Designed with resin sealed case, filters are environmentally protected and suited for signal/data lines, industrial controls, telecommunications, and test equipment.

KYOCERA Corporation
Kyoto 612-8501  Japan
Jul 09, 2007 Measuring 2.0 x 1.25 x 0.7 mm, KVA21 series is RoHS-compliant, distributed constant type component that offers EMI filtering as well as ESD protection. Optimized inductor and capacitor layout on filter array results in 8 kV ESD contact discharge in accordance with IEC/EN 61000-4-2. Solution offers attenuation characteristics exceeding 30 dB over 800-1,000 MHz range and 20 dB over 1.0-2.5 GHz range.

TURCK, Inc.
Plymouth, MN 55441
Jun 25, 2007 With integrated diagnostics module that provides vital statistics, Diagnostic Power Conditioner system (DPC) assists in commissioning, monitoring, predictive maintenance, and troubleshooting of FOUNDATION fieldbus systems. It can supply up to 16 segments each with max of 800 mA output current and 30 Vdc output voltage. DPC also features complete galvanic isolation between diagnostics bus, H1 segment output, and bulk power, enabling clean signal without feedback from fieldbus device.

Spectrum Control, Inc.
Fairview, PA 16415
May 14, 2007 Delivering up to 3.24 kW of uninterrupted, EMI filtered power, Power Entry Module provides 48 Vdc power and circuit protection at equipment interface of ATCA300 optical transport rack. It offers provisions for hold-up of 4.0 mSec and in-rush current of 5.0 A max. Device is reverse-polarity protected with voltage range of -38 to -75 Vdc, current rating of 60 A max, power output of 2.6 kW, and 40 W power dissipation. Multicolored LEDs on front panel indicate operating status.

PulseCore Semiconductor
Campbell, CA 95008
Mar 26, 2007 With options for controlling spread margin and timing, Timing Safe(TM) products merge zero delay clocking and spread-spectrum clock modulation for EMI reduction. ICs can be directly dropped in path of offending clock while maintaining same phase and timing relationship with synchronized data. Models ASM3P62300A/B/C and ASM3P62300D/E respectively come in 8- and 16-pin packages and provide one or 8 EMI-compliant phase-aligned output. Products target frequencies from 15-50 MHz.

Sola/Hevi-Duty, EGS Electrical Group
Rosemont, IL 60018
Mar 20, 2007 Designed to safeguard equipment against damaging low-energy voltage transients and high-frequency noise, STF Series of Active Tracking® Filters continuously track input ac power line at all locations on sinewave and instantaneously counter noise. By reducing normal mode transients to ±5 V and absorbing large bandwidths of noise, they recreate well-regulated sinusoidal waveform. Units come in 1- and 3-phase configurations with input voltage of 120, 240, and 480 Vac at 50/60 Hz.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jan 23, 2007 With profile of 0.6 mm and pin to pin pitch of 0.4 mm, VEMI filter arrays optimize real-estate and provide ESD protection in portable electronics. RoHS-compliant products come in 4-, 6-, and 8-channel versions and are capable of attenuating unwanted signals by more than 30 dB over 900 MHz to 2.3 GHz frequency range. Offering 100 W resistance and 60 pF input capacitance, series also provides transient protection for data lines per IEC6100042 and IEC6100045.