Datatronics
Romoland, CA 92585 8916
Oct 07, 2008 Offering 0.3 kV performance at 10 W, Model 4260-2757 Series Hi-Voltage Flyback Transformer delivers high voltage signal that is virtually corona-free. Designed for high-power, high-voltage device applications, unit is suited for applications in severe shock and vibration environments including munition systems. It measures 1 x 1.30 in. and meets performance, safety and quality standards of multiple U.S., European and Asian industry standard specifications.

Datatronic Distribution
Romoland,, CA 92585
Oct 02, 2008 Model SM580 Gate Drive Transformer provides pulse control in gate drive circuits used in MOSFETs and IGBTs for Switch Mode Power Supplies and other electronic equipment. It has typical pulse rating of 21 Vµsec, hi-pot rating of up to 1,500 Vdc, and DCR of 2.8 W. Measuring 0.170 in. high with flat top, unit comes in 0.260 x 0.330 in. SMT package that features rugged housing materials and is compatibile with high-density circuit designs.

Datatronics
Romoland, CA 92585 8916
Aug 25, 2008 Suited for line and portable medical applications such as defibrillators as well as industrial lasers, 4283-1250 series offers primary-to-secondary isolation of up to 7.5 kVdc. Center-tapped secondary is used for creating both positive and negative outputs, which would drive full wave bridge rectifier, ground in center, positive on one side, negative on other, or could be used as half wave output providing positive/negative voltage. Unit operates in unstable or harsh environments.

ABB Ltd.
Zurich CH-8050  Switzerland
Aug 22, 2008 Suited for high voltage network applications, Magneto optical current transducer (MOCT-P) optical instrument transformer has free-standing sensor column that communicates with rack mounted electronic module, located in control house, by means of 200/230 multimode optical fibers. It features multiple analog 200 mV low voltage outputs, SF6 free design, and accurate reproduction of fault events. Unit can be used in transmission line, bus, transformer, breaker, or distribution schemes.

Grupo Premo
Barcelona   Spain
Jul 30, 2008 Developed under vacuum potting technique that allows high isolation level up to 10 kV, inductive planar set is designed for dc/dc converters and traction inverters in hybrid vehicles. With 2.5-7.2 kW power management range, unit features 5 cm height profile and occupies 50 cm², with output chokes measuring 4 cm in height and occupying 30 cm². Offering temperature resistance of up to 180ºC, unit has rated losses below 1% of total output power.

Grupo Premo
Barcelona   Spain
Jul 11, 2008 Featuring power management of 1.7-5 kW in 3.3 cm height profile and occupying less than 100 cm², PREMO planar transformer meets AEC Q-200 standard. Developed under vacuum potting technique that allows for 10 kV isolation, it can be used in dc/dc converters and traction inverters in hybrid vehicles. Unit is available in shell shaped aluminum heat sink which enables isotropic heat transfer, and has rated losses below 1% of total output power.

Electro Standards Laboratories
Cranston, RI 02921
Jun 26, 2008 Electrically compatible with TEDS, Model 4215-LVDT Smart Indicator offers plug and play operation and can communicate with up to 254 Model 4215-L units on one serial communication bus. Model 4215-L is designed for measurement and control of 2-channel LVDT measurement fixtures. In addition to standard configuration, Model 4215-LVDT is capable of mixed transducer interfacing, including LVDT, DC strain extensometer, and quadrature encoder-based position measurement devices.

ARC International
San Jose, CA 95134
Jun 17, 2008 ARC Sound 210E fully programmable solution enables SoC designers to build devices that achieve high audio quality, and supports Sonic Focus audio post-processing software. It incorporates ARC Energy PRO(TM) power management technology, which reduces power consumption by turning off subsystem when no activity is registered. Pre-verified and pre-integrated subsystem is available with library of software codecs for common audio formats such as MPEG-2/4 AAC and Dolby Digital.

Phoenix Contact
Harrisburg, PA 17111 0100
May 22, 2008 Mounted via DIN rail or panel, CPT series maximizes inrush capability and output voltage regulation when electromagnetic devices are initially energized. Products have touch-safe COMBICON connectors with dual secondary connection points and are designed for high-inrush applications that require output voltage stability. They accept single-phase input voltages of 220/230/240/440/460/480 Vac and provide output voltages of 120/115/110 Vac with VA ratings of 50/100/150/250/500 VA.

Highline Products
Waltham, MA 02154
Apr 01, 2008 Featuring monolithic construction with rib support structure, Millennium Flat Pad is unaffected by extreme weather conditions. Built to exceed WUC 2.15 and NEUC (Northeast Underground Committee) design loading requirements, it has cable opening and provides extensive ground contact for optimum transformer support. Offered in 42 x 42 x 4 in. (32 lb) and 42 x 52 x 4 in. (42 lb) sizes, UV stabilized product resists corrosion, mildew, and most chemicals.

Q-Tran Inc.
Bridgeport, CT 06610
Feb 22, 2008 Ranging from 2.5-5 in. wide, Q-Set modular toroidal transformer cassettes power low-voltage lighting for pool/spa, landscape, and indoor applications. Q-Set1 offers one secondary circuit breaker (CB) of 15, 20, and 25 A, which provides 180, 240, or 300 W in max lamp load. Q-Set2 offers 2 secondary CBs of 15, 20, or 25 A for max wattages of 360, 480, or 600, while Q-Set3 incorporates 3 secondary CBs of 15, 20, or 25 A, which provide 540, 720, or 900 W. All include 50 A terminal block.

TDK Corporation of America
Mount Prospect, IL 60056
Feb 19, 2008 To meet demands of harsh automotive environments, IVT Series construction characteristics include high temperature resistant winding wire, laser welds, and sectionless bobbin. Leakage inductance is 150-300 mH, operating temperature range is -30 to 130°C, and devices measure 39.0 x 9.0 x 4.8 mm (max). Units are suited for LCD backlights used in car navigation systems, notebook personal computers, and other electronic devices.

Murata Power Solutions, Inc.
Mansfield, MA 02048
Feb 12, 2008 Surface-mount 5300/5400/5500 series operate over 50-500 kHz range and are built with UL94 V-0 package materials. Comprised of 10 devices with primary current rating to 10 A and 20-200 turns, 5300 series can measure/monitor ac currents up to 10 A and features primary to secondary isolation of 500 Vrms. Series 5400 and 5500 measure/monitor ac currents to 15 A and are available with 50, 100, or 200 turns. Respectively, they offer 1,200 and 1,000 Vrms primary to secondary isolation.

Q-Tran Inc.
Bridgeport, CT 06610
Jan 22, 2008 Q6 Multi-Volt Toroidal Transformers are UL Listed for surface mounts in any position, including ceiling, floor, and 6 different wall surface mount positions. They feature dual-tap design to compensate for voltage drop from dimmer loss, standard choke for noise reduction and in-rush current, and variety of circuit breakers for secondary circuit protection. Working with 12 or 24 V low voltage lighting, transformers are offered in 3 models.

W.A.C. Lighting Company
Garden City, NY 11530
Dec 13, 2007 SMART TRANSFORMERS meet UL Standard 2108 for abnormal short circuit protection and ensure minimum of 8 hr safe operation under duress of short circuit. Along with full-scale dimming and silent operation, products offer ability to distinguish abnormal from normal short circuit to facilitate diagnosis of problem source by service people. Additional features - auto-reset, thermal overload protection, and soft-start - help extend lamp life.

Honeywell Sensing and Control
Golden Valley, MN 55422 3935
Oct 25, 2007 Part of aerospace position sensors family, Rotary Variable Differential Transformer (RVDT) Position Transmitter is designed for European aerospace market. Multi-purpose, environmentally sealed, dual redundant device with self-rigging mechanism is supplied standard with fork-style interface, integral rig-lock feature, twin bayonet connectors, and flange mounting.

MPS Industries, Inc.
Torrance, CA 90505
Oct 24, 2007 MPS video isolation transformers are constructed to provide optimal ground loop isolation and common mode rejection. This improves image quality in video monitoring or surveillance systems by reducing longitudinal hum caused by earth loop current flows due to ac or dc earth potentials, with bandwidth from 10 Hz to 10 MHz. Supporting CCTV and A/V industries, products can be custom-designed to configuration and dimensional requirements of en-users for impedance matching and bandwidth.

MPS Industries, Inc.
Torrance, CA 90505
Oct 24, 2007 Available in thru-hole and SMT versions, miniature digital audio transformers comply with Audio Engineering Society/European Broadcasting Union standards. RoHS-compliant products have 1:1 turn ratio and exhibit sample data rate from 32-192 KHz suitable for 75-110 W connections. Transformers can be custom designed into various configurations upon customer request.

GE Company GE Industrial Systems
Plainville, CT 06062
Sep 17, 2007 Model Guard III Harmonic Mitigating Transformers are designed to curb harmonic current distortion in order to reduce transformer heating, and improve upstream power quality. Transformers utilize sine wave phase shifting and source impedance and are available in specific phase shifts of 0, 15, 30, and 45°. Units maintain NEMA TP-1 standards for energy efficiency, are compliant for LEED building specifications, and meet CAS C22.2 #47 UL 1561 NEMA ST20, and IEEE C57.110.

W.A.C. Lighting Company
Garden City, NY 11530
Aug 13, 2007 Engineered for low voltage lighting systems, Electronic Transformers provide thermal overload protection in environment where case temperature rises above 120°C. They automatically shut down and continue to cycle until temperature falls below 120°C threshold. Auto reset function protects against normal and abnormal short circuits for minimum of 8 hr, while Soft start technology protects lamps and transformers on cold start-ups, applying voltage gradually.