Data Device Corp. (DDC)    Bohemia, NY 11716-2482
May 10, 2013 Consisting of completely integrated MIL-STD-1553 physical layer in single package, SPACE-PHY includes +5 V dual transceivers and transformers. Unit features extended temperature range of -55 to +125°C, making it suitable for extreme environmental conditions encountered in mission critical space applications.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
May 09, 2013 Completely integrated physical layer, SPACE-PHY, consists of +5 V dual MIL-STD-1553 Transceiver/Transformer Device. Single package includes dual transceivers and transformers and simplifies layout. Able to replace 2 transceivers and 2 transformers, this radiation-tolerant and space-qualified solution has -55 to +125°C operating range that accommodates environmental conditions encountered in mission-critical space applications.

E Craftsmen    Waterloo, ON N2L4C4  Canada
May 07, 2013 Manufactured using unique rectangular core with round cross section, R-core Transformers have low electrical noise. Core is gap-less and continuous, and windings are done on special round bobbins on two parallel legs of core. Typical applications include test equipment, audio video amplifiers, and other noise sensitive equipment.

Pulse Electronics    Trevose, PA 19053
Apr 01, 2013 Offering 24 output voltage and power combinations, 17.7 x 14.0 mm EP13 Plus series includes 12 isolation transformers that accommodate input voltage ranges of 9–57 V and 33–57 V and provide 6 different output voltage combinations from 3.3–24 V. Modified core with maximized cross-sectional area reduces number of turns necessary for given output voltage or increases output power by optimizing utilization of winding window. Bobbin lead shape increases allowable lead wire terminations.

Larson Electronics, LLC    Kemp, TX 75143
Mar 21, 2013 Featuring portable design that can be carried by hand, Model TX-40-6X-120-1224-WP combines 6-outlet spider box with step down transformer. Operator can connect line-in cord to 120/240 Vac outlet and system will transform power down to 12/24 Vac or Vdc, made available by L5-20 twist lock receptacles. Delivering up to 1,000 W over 6 outlets, system can run six 100 W trouble lights from single 120 or 240 W outlet. NEMA 3r configuration enables indoor/outdoor use.

Precision, Inc.    Minneapolis, MN 55430
Mar 19, 2013 Combining resonant inductor and transformer into single package, LLC Transformer is available in power ranges from 100–800 W. Resonant power conversion topology minimizes switching losses by promoting zero voltage switching, minimizing unnecessary power dissipation in switches. Power dissipation can be lowered to as little as 5%, ensuring 99% transformer efficiency and 95% overall efficiency. Applications include LED/LCD TVs, industrial LED lighting, and AC/DC power converters with PFC front end.

Siemens AG    Munich D-80333  Germany
Mar 14, 2013 Equipped with LCD for parameterization, measured value display, and fault diagnostics, Sirius 3UG4625 and 3UG4825 for IO-Link have 2 separate outputs that can be assigned different limit values for 2-phase alarm system involving warning and subsequent shutdown. Residual currents are measured using Sirius 3UL23 differential current transformer, which monitors line systems with phase currents up to 630 A. Measuring accuracy of system, including transformer, is subject to just ±7.5% deviation.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Nov 13, 2012 Model MABA-011017 is designed to work with DOCSIS3.0 programmable gain amplifiers that require 2:1 impedance match. It has frequency range of 5-85 MHz, return loss of 19.0 dB, and insertion loss of 0.50 dB. Transformer is available in surface mount SM-138 package.

Coilcraft Inc.    Cary, IL 60013
Nov 08, 2012 Accommodating critical applications that require miniature ferrite-core transformers, AE458RFW Series features open design, SMT devices tested to meet or exceed NASA low-outgassing specifications. Current capacity is 250 mA, dimensions are 4.19 x 4.55 x 3.05 mm, and tap configurations include basic 4 lead, 5 lead with secondary center tap, and 6 lead with primary and secondary center taps. Full-rated operational range is -55 to +155°C, with unlimited floor life at less than 30°/85% RH.

Pulse Electronics    Trevose, PA 19053
Aug 14, 2012 Designed on SMD platform with offset pins to maintain separation between primary and secondary circuits, PH9185NL Series Switch Mode Power Transformers provide reinforced insulation power supply for RS485/RS232 transceiver ICs. In accordance with IEC60950/EN61558, construction of devices has been certified by UL/TUV for reinforced insulation up to 400 V working voltage. Design utilizes Class F insulation system, and guarantees 8 mm creepage with 4,000 Vrms isolation voltage.

Larson Electronics, LLC    Kemp, TX 75143
Jun 04, 2012 Supplied in heavy-duty steel tube cage, Magnalight MGPD-SP-125-1D-45-3X50 lets operators tap 480 Vac 3-phase power source and convert it to 120/208 Vac for powering equipment, tools, and lighting. Product is fitted with 45 KVA transformer and provides protection through single 125 A main breaker, three 50 A double-pole GFI breakers, and fusible or non-fusible NEMA-3R disconnect. Integral skid pockets and centrally located lifting eyelet facilitate deployment.

Renco Electronics, Inc.    Rockledge, FL 32955
May 25, 2012 Suited for use in push-pull converters as well as half- and full-bridge circuits, RL-9500 is designed with isolated primary winding, 1:1:1 turn ratio, and 3,000 V Hi-Pot. Product comes in space-conserving 18 mm profile package and is constructed to support operation from -40 to +130°C.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 03, 2012 Featuring amperage range of 30/60/120 A or 20/100/150 A, depending on model, Series SCT continuously measures current consumption of pumps, fans, boilers, solar panels, and chillers for energy monitoring. Current or voltage outputs can be scaled using slider switch to select from 3 factory set ranges. With response time of 2 sec, transformers deliver ±2% accuracy from 10-100% of selected range. Optional 10 A command relay can snap onto current switch, eliminating need to mount additional relay.

Larson Electronics, LLC    Kemp, TX 75143
Apr 30, 2012 With 500 V rating, Model EPL-TX-500-4-1MLED converts 220 V 50/60 Hz current to 120 Vac 50/60 Hz, distributes secondary output via four 20 A twist-lock explosionproof receptacles, and provides 10,000 lumens via 150 W explosionproof LED light, which is vertically adjustable. Dolly cart mounting configuration allows operators to roll entire unit into position and move it about as needed. With built-in hanging rack, operators can stow included 25 ft explosionproof cord.

Measurement Specialties, Inc.    Hampton, VA 23666
Apr 23, 2012 Manufactured under ISO9001 quality system, XS-B Linear Variable Differential Transformer (LVDT) has 3/16 in. dia, with custom design capability to diameters of 1/8 in., that allows grouping for high-density surface profile measurements in space-restricted applications. This position sensor, supplied in stainless steel housing, features electromagnetic shielding and resistance to shock and vibration. Standard operating temperature range is -67 to +302°F, with 430°F optional.

Hammond Power Solutions, Inc.    Baraboo, WI 53912
Apr 17, 2012 Suitable for primary and secondary connections from 50-3,000 VA or 30 A or coil face terminations over 3,000 VA or 30 A, HPS Fusion is enclosed in rugged TYPE 1 enclosure, allowing for easy mounting and installation via 4 mounting slots and 2 keyhole slots. Access to primary and secondary wiring compartment is facilitated by removable covers. Product is designed specifically for applications such as adjusting supply voltage to match load requirement or supplying motor control circuits.

SNC Manufacturing Co., Inc.    Oshkosh, WI 54902
Apr 03, 2012 Available in models from 50 Va to 5 KVa, Global Control Transformers provide operator safety by delivering stable output voltage while accommodating momentary current inrush that occurs when electromagnetic devices are energized. Single-phase units include pre-wired primary and secondary fuse blocks mounted on top. Backed by UL, CSA, cULus, and CE agency approval, transformers are available with temperature classes adjustable by Va to meet customer requirements.

Larson Electronics, LLC    Kemp, TX 75143
Mar 16, 2012 Converting 3-phase 480 Vac power to single-phase 120 and 240 Vac, 30 KVA Model MGS-30KVA-6X120-2X240 allows operation of equipment such as motors that require linear current and lighting/computers that require non-linear current. Portable unit distributes power through seven 120 V receptacles and 2 Hubble 50 A/240 V twist lock receptacles. Mounted on 1/8 in. thick diamond plate platform, system features weatherproof construction, heavy gauge square steel support frame, and integral skid pockets.

Renco Electronics, Inc.    Rockledge, FL 32955
Mar 01, 2012 Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130°C.

Larson Electronics, LLC    Kemp, TX 75143
Feb 24, 2012 With Model MGS-150KVA-480-10X100A, operators can tap into 480 V 3-phase power sources and step current down to 120/208Y output for powering variety of tools and equipment. Unit distributes 120 Vac single-phase through 4 GFI-protected receptacles and 208Y via ten 100 A ADR1044 outlets. Safe connection to 480 Vac is provided through 400 A fused ON/OFF main disconnect switch. Featuring 2 in. square steel cage, transformer has centrally located lifting eyelet and integral skid pockets for transport.