Schurter, Inc.    Santa Rosa, CA 95403
May 21, 2013 Compact GSP4, IEC C20 appliance inlet features PCB terminals for L, N, and E and 6.3 x 0.8 mm quick connect or solder tab for additional grounding to chassis. Unit is snapped in or screwed on to PCB before soldering. Included stabilizing posts absorb withdrawal and insertion force. Unit carries ENEC and CCC approvals for 16A / 250 Vac, is UL approved for 20 A/250 Vac, and is CSA approved for 18 A/250 Vac while fulfilling glow-wire test requirements for equipment according to IEC 60335-1.

Utility Systems Technologies    Watervliet, NY 12189
Apr 12, 2013 Current Balancer is designed for 3-phase motor applications where power source is supplying unbalanced current, causing excessive heat, and potentially premature failure. Using high-speed electronic tap switching design, unit precisely adjusts voltage which in turn will balance current to within 3% or less. Housed in NEMA-3R enclosure for outdoor installations, balancer is suited for submersible pumps used in municipalities supplying water in rural areas.

Schurter, Inc.    Santa Rosa, CA 95403
Mar 29, 2013 Available with integrated 5, 12, and 24 V resistor options, MSM series offers white illumination to supplement existing red, green, yellow, and blue options. Construction includes stainless steel housing and actuator, with micro switch snapped into housing with 19, 22, or 30 mm mounting diameter. Switching voltage ratings range from 5 Vdc to 250 Vac, and current ratings vary from 0.1–10 A. Operating from -25 to +85°C, IP67-rated switch also carries impact resistance rating of IK07.

Clore Automotive    Lenexa, KS 66215
Nov 17, 2010 Providing 1,700 peak amps and 425 cranking amps, Jump-N-Carry JNC660 can be continuously plugged in for recharging, without damage or overcharging, enabling busy shops and technicians to keep unit in always-ready state for their next jump starting need. Amber LED indicates that unit is currently charging and green LED shows when unit has reached full charge. System is suited for automotive, marine, light truck, agricultural, industrial, and fleet starting.

Vincotech GmbH    Unterhaching   Germany
May 19, 2010 Supplied in flow 0 2-clip housing that measures 66 x 33 x 12 mm, flowBoost 0 products include 900 V booster (12 kW, 50 kHz) with 900 V CoolMOS(TM) C3 MOSFETs and 1,200 V booster (14 kW, 16 kHz) equipped with 1,200 V high-speed IGBTs. Both modules benefit from 1,200 V SiC boost diodes and bypass diodes with minimal forward voltage. Areas of use include input stages in solar and SMPS applications where high efficiency (98.5%) is important.

Sauer-Danfoss    Ames, IA 50010
Nov 06, 2009 Integrating OSP steering technology and electrohydraulic steering valve, OSPE improves vehicle performance and comfort while facilitating compliance with Machinery Directive 2006/42/EC and simplifying hydraulic system architecture. Safe State feature can isolate electrohydraulic section of steering valve to protect steering system. Other features include selectable reactive and non-reactive steering modes, Load Sensing and Open Center options, and variable steering ratio.

Del City    Menomonee Falls, WI 53051
Sep 15, 2009 Accepting all standard on-off toggles with 15/32 in. mounting stem, spring-loaded toggle safety covers are made of colored urea plastic and prevent accidental actuation in variety of applications from racing to agriculture. Black steel faceplate base facilitates installation. To easily identify accessories, covers are available in red, bright red, black, chrome red, chrome blue, and chrome silver.

RAVEN Systems    Phoenix, AZ 85027
Mar 03, 2009 Utilizing paging network, Model RC4 can reboot any electrical device via touchtone phone or computer with Internet connection. Unit is fully functional with Flex or POCSAG systems, and on all frequencies, including VHF, UHF, and 900 MHz. Device contains 4 outlets, which can be controlled individually, or as whole to control power on/off, or reboot devices. Featuring 120 Vac input power with 10 A max, control has internal antenna, but can accept external option.

Del City    Menomonee Falls, WI 53051
Jan 02, 2009 Pre-Assembled Kits offer 8 different assortments that include O-ring, cotter-pin, stainless steel screws, heat shrink, multi-gauge terminal, and battery kits. Each piece is sorted in small, lightweight plastic or metal case, suited for workshop, vehicle, or job site. Component chart is attached to cover, enabling user to identify each piece.

Pass & Seymour/Legrand    Syracuse, NY 13221
Oct 29, 2008 Suited for projects with repetitive installations such as hotels, office buildings, and condominiums, P&S PlugTail Power(TM) Pre-Fabricated Wiring Assemblies offer simple installation, with no vertical measuring necessary for floor brackets which slide under sill plate. Wall brackets screw directly to studs. Assembly system includes floor or wall brackets with one- or two-gang openings, pre-installed boxes and pre-installed mud rings available in 5/8 or ¾ in. rise.

Remy International, Inc.    Pendleton, IN 46064
Aug 04, 2008 Featuring 180 and 200 A options with 3 mounting styles that allow flexibility when upgrading, Model 28SI includes Remote Sense(TM) technology that provides accurate voltage readings and optimizes battery state-of-charge. Dual Internal Fans design protects alternator from high under-hood engine temperatures. Employing lightweight design, unit suits school bus, shuttle bus, and recreational vehicles as well as trucks with high electrical loads.

Highline Products    Waltham, MA 02154
Apr 30, 2008 Constructed of one-piece fiberglass, Wind Power Junction Boxes are collection system cabinets for wind farms with lid that opens over 90° and features 2 wind lock hinges. Units are rated for 35 kV and offer removable front panel option for serviceability and cable terminations. Suitable for direct burial or pad mounting, boxes meet ANSI security requirements and incorporate munsell green 2-coat finish with UV inhibitors. Sizes range from 55 x 53 in. up to 85 x 63 in.

Thomas & Betts Corp.    Memphis, TN 38125
Mar 12, 2007 Equipped with inner ring that adjusts from ½-1½ in., Steel City® Adjustable Mud Ring ensures that stud-mounted outlet boxes will fit flush with any thickness of finished drywall, plaster, or ceramic tile. Two adjustment screws enable inner ring to be set at anticipated depth prior to installation and adjusted after installation. Featuring steel construction, mud ring includes measured rule markings and is mountable to 4 in. sq metallic deep outlet boxes.

3M    St. Paul, MN 55144
Jan 26, 2007 Suited for high-speed interfaces in optical and solid state applications, RoHS-compliant SATA Connector is used to reduce size, increase transmission speed, and improve data reliability. Signal segment features 2 differential pairs that serve as transmit (Tx) and receive (Rx) contacts, separated and surrounded by 3 ground contacts that function as EMLB contacts. Power segment has 15 contacts that accommodate primary voltage ranges of 3.3, 5, and 12 V.

LuxDrive    Randolph, VT 05060-0444
Jan 25, 2007 Capable of driving 10 LEDs at 350 mA in series from 12 Vdc, 4015 BoostPuck features .83 x .43 in. package size that facilitates direct integration into fixtures. Drop-in module requires no electrical engineering knowledge to install and boosts input voltage as necessary to power LED arrays. Along with 0-10 V dimming, flash, and strobe operation features, provides stable platform for powering LEDs and can achieve up to 95% efficiency.

Palmer Wahl Instrumentation Group    Asheville, NC 28804
Jan 19, 2007 On-site Multifunction Model C50 measures and generates, on 2 isolated channels, voltage, current, frequency, and resistance signals as well as various resistive probes and thermocouples. Dual display simultaneously indicates measurement value, emitted value, gauge, and selected parameter functions. Designed for outdoor use, Pocket Process Calibrator/Meter, Model P32 meets needs of transmitters and process sensors using 4-20 mA or 0-10 V signals and provides 0.015% accuracy.

Weidmuller, Inc.    Richmond, VA 23236
Dec 18, 2006 Offered in epoxy sealed PBT housing with flammability rating of UL 94 V0, JACKPAC® is designed to address signal conditioning in industrial environments. Device uses M12 connector to integrate in sensor actuator cabling, and helps introduce interface device into circuit without need for enclosure/control panel. Product is available in configurations like form C relay output, pulse stretching module, over-voltage protection module, and signal isolator.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 08, 2006 Sta-Kon® Luminaire Disconnect enables disconnection of power to fluorescent lighting fixtures without exposure to live wires. UL® listed and CSA certified, device consists of male and female disconnect body with pre-stripped wire connected to male and female tin-plated brass contacts, housed in crack-, abrasion-, and impact-resistant polycarbonate. Device includes 18 ga AWG solid copper-insulated wire leads, and latch to verify contacts are secured.

Hubbell Inc. (Delaware) / Wiring Device-Kellems Division    Milford, CT 06460
Dec 05, 2006 Offered as alternative to nylon or stainless steel plates, painted steel wall plates are available with multiple gangs and in common configurations. Products are made from .031 cold rolled steel and feature powder coat finish paint in either almond or gray colors. They can be used on standard NEMA boxes and come with gloss-finish, beveled edge, and packaged painted screws.

Schneider Electric    Palatine, IL 60067-7399
Nov 10, 2006 Designed for motor branch short circuit protection, Square D® PowerPact electronic Motor Circuit Protector (MCP) is set to in-rush characteristics of motor in compliance with NEC requirements. MCP features two dial design, with one dial that allows for Full Load Amperes (FLA) adjustment and a second that selects type of motor protection. Product provides 5 catalog numbers for use with NEMA Size 00 to 5 starters.