Larson Electronics, LLC    Kemp, TX 75143
May 25, 2012 Designed to be hung on railings, scaffolds, or ladders, Model SLI-LEDP10W-60ET is constructed with IP68-rated waterproof 60 W LED light bar that produces 5,160 lm of white light in 40° beam spread for wide area illumination. Light has heavy gauge aluminum housing with unbreakable LEXAN lens and adjustable trunnion bracket that allows vertical adjustment through 180°. Equipped with waterproof transformer, light can operate with 120-277 Vac, 12-24 Vdc, and can be connected in series.

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2012 Operating with 120 Vac, Model WAL-M-500-120 is equipped with 500 W quartz halogen lamp that illuminates over 3,000 ft² of work space. Unit can be utilized as pedestal light, overhead light, or as wall-mounted task area illumination. Constructed of aluminum with tempered glass lens, lamp has magnetic mounting system consisting of three 5 in. diameter magnetic pads producing total of 600 lb of magnetic gripping force. Chemical- and abrasion-resistant 25 ft SOOW cord is included.

Lightguard    Burgaw, NC 28425
May 24, 2012 Comprised of 6 and 12 V, 12-50 W units, Vectra Series offers various lamp head assembly options (up to 3 heads) and tool-less hinged cover. Smart Charger self-diagnostics electronics continuously monitor critical functions. Optionally, self-testing feature satisfies monthly periodic testing requirements in NFPA 101 and IBC and is compatible with hand-held IR testing device. Maintenance-free, sealed lead calcium or nickel cadmium battery surpasses need for 90 min of emergency power.

Larson Electronics, LLC    Kemp, TX 75143
May 24, 2012 Suited for military and law enforcement applications as well as industrial heavy equipment, PML-40W-PAR46 comes in red, amber, green, blue, IR, and UV as well as spotlight and floodlight configurations. Permanent mount 40 W vehicle light is equipped with MILSPEC 461 certified PAR46 LED bulb and has waterproof fixture fitted with adjustable hinged mounting bracket. Product operates from 9-46 Vdc, supporting direct connection to vehicles with 12 or 24 V electrical system.

Larson Electronics, LLC    Kemp, TX 75143
May 24, 2012 Able to operate with voltages from 9-32 Vdc, TPM-2XLEDP3W-3 provides illumination source for boats, trailers, and mobile applications. Adjustable, surface-mount LED lighting tower can extend up to 12 ft high for use and collapse to 3 ft for travel. Attached to vertical surfaces via included mounting plate, pole is fitted with 2 IP68-rated and independently adjustable Magnalight LEDP3W-3 LED lights that produce 1,368 lm in total while drawing 1.6 A and 18 W from 12 V electrical system.

Larson Electronics, LLC    Kemp, TX 75143
May 23, 2012 Operating from 120-277 Vac or 12/24 Vdc power, 150 W Model WAL-JH-150LED-120/277V produces 14,790 lumens and can cover 18,000 ft² of workspace. Adjustable lamp head is constructed of aluminum with shatterproof LEXAN lens and IP68 waterproof rating. Made of heavy gauge aluminum, scaffold/ladder mount J-bracket can be adjusted from 26-43 in. Adjustable center post allows operator to raise light 3 ft above bracket to minimize glare and optimize work space coverage.

Larson Electronics, LLC    Kemp, TX 75143
May 23, 2012 Equipped with 150 W adjustable light head measuring 16 in. in diameter, Model EPL-TP-1X150LED-100 delivers 10,000 lumens of light output in wide flood pattern that can illuminate 8,000 ft² work space. Light head is mounted atop adjustable 4-leg tower constructed of non-sparking aluminum. With 2 solid rubber wheels, unit can be tilted back and rolled from one area to another. Center mounting post is adjustable from 4-12 ft in height, and entire tower is collapsible.

Acuity Brands Lighting    Conyers, GA 30012
May 22, 2012 Available for 15-40 ft mounting heights and ambient environments up to 131°F, I-BEAM® LED High Bay meets horizontal and vertical light level requirements through narrow or wide distributions. Reflectors are precision formed and utilize ALANOD® MIRO® specular aluminum, while optional semi-diffuse lens provides glare control and LED protection. I-BEAM luminaire can be integrated with factory-installed digital controls such as occupancy sensors, daylight photocells, or nLight® devices.

Outwater    Bogota, NJ 07603
May 21, 2012 Available for Cable Shelving Hardware system, LED Crystal Light Box uniformly backlights graphics, posters, and promotional messages without visible power supply. Solution includes suspended floor to ceiling cables, doubled-sided acrylic sign holders with hardware, and transformer. Suitable for residential or commercial use in floor to ceiling, wall to wall, and wall to floor applications, LED Crystal Light Box will hold up to 5/16 in. material and is rated for 50,000+ hr usage.

Everlight Electronics Co. Ltd.    TAIPEI   Taiwan
May 18, 2012 Available in ANSI 3,000 K CCT as well as all Energy Star/ANSI color temperature ranges, C52 COB LED Series is suitable for directional and decorative applications such as MR lamps and P35 bulbs. Multi-chip 3.7 W LEDs, based on ceramic substrate, feature thermal resistance of less than 1.8°C/W, efficacy of 100 lm/W at 3,000 K CCT, and greater than 80 Ra CRI. Devices can be mounted directly on heat sink, eliminating SMT process and enabling more direct thermal dissipation.

Holophane    Granville, OH 43203
May 18, 2012 DualBay electronic high bay luminaire uses dual lamp technology, solid-state electronic ballast, and dedicated thermal management system, coupled with ISD Superglass® technology, to optimize light quality, distribution, and energy conservation. Intended for retail and commercial lighting applications, luminaire comes in dual 210 and 315 W versions and delivers 90+ CRI, up to 112 lm/W, and lamp lumen depreciation of .90.

Anderson Thermal Devices, Incorporated    Hawthorne, NJ 07506
May 16, 2012 Offered in ODs from 2-12 in., omega shaped lamp has max temperature of 4,350°F and life expectancy of ~5,000 hr. C lamp, similar to standard T3 shortwave lamps, has seals outside of heated area. Optional gold and ceramic reflective coatings make lamps unidirectional. Available in medium and shortwave, U lamps also allow for sealed end on shortwave to be outside heated zone. Shaped lamps have design features such as clear quartz, ceramic, and gold reflective coatings on 180° of circumference.

J.W. Speaker Corporation    Germantown, WI 53022
May 15, 2012 Offering direct replacement for 7 in. headlamps, Model 8700 Evolution delivers 650 effective lumens as low beam and 760 lumens as high beam. Advanced optical design enables headlamp to produce beam pattern that minimizes glare for oncoming traffic while placing even spread of light where drivers need it most. Constructed with heavy-duty die-cast housing and hard-coated polycarbonate lens, lamp provides plug-and-play installation.

GlacialTech Inc.    Taipei   Taiwan
May 15, 2012 Utilizing Philips Lumileds chips, Models GL-FD30WW and GL-FD30CW feature color temperatures of 3,000 and 6,000 K and emit 1,570 and 1,900 lumens of light, respectively. Units consume 27 W, have input voltage range of 11-15 Vdc/22-30 Vdc, and convert more than 80% of electricity into light. Suitable for indoor and outdoor use, lights provide 30,000 hour life span and come with adjustable bracket for light positioning through 30° or 60° beam angle.

Acuity Brands Lighting    Conyers, GA 30012
May 15, 2012 Consisting of light engine and decorative trim, L Series Modules provide look of traditional lighting but are 80% more energy efficient than incandescent lamps. Units are available in 4, 5, and 6 in. apertures and are specifically designed to fit most IC and non-IC housings. TRIAC dimmable down to 15%, modules feature focused optics that precisely direct light from LED to task pane.

Larson Electronics, LLC    Kemp, TX 75143
May 14, 2012 Producing 14,790 lumen light output, Model BML-150LED features IP68-rated waterproof LED assembly, aluminum pedestal mount platform, and four 200 lb grip magnetic feet that provide total of 800 lb of gripping force for secure mounting to any ferrous metallic surface. LED lamp, equipped with CREE LEDs and LEXAN lens, is vertically adjustable for optimum work area coverage. Integrally mounted waterproof transformer allows light to operate with 120-277 AC current.

Larson Electronics, LLC    Kemp, TX 75143
May 10, 2012 Consisting of heavy-duty quartz halogen lamp mounted to J-type bracket that adjusts from 26-43 in., Model WAL-JHEQ-LV-25 can be mounted to railings, scaffolds, and steel frames. Portable work light is available in 150 W/12 Vdc configuration which will illuminate 1,400 ft², or 300 W/24 Vdc configuration for up to 1,900 ft². Lamp is fully adjustable, with 90° of vertical tilt and 360° of pivot rotation. With adjustable center support, operator can raise lamp up to 3 ft higher than mounting location.

NEXT Lighting    San Francisco, CA 98033
May 10, 2012 Measuring 4 ft long, NEXTLamp Replacement Lamp provides mercury-free lighting solution that is dimmable, quiet, and flicker-free. Thermal and optical management system enables LEDs to operate at low temperature for extended life and stable color maintenance. With ability to shape light distribution, NEXTLamp is suitable for challenging applications for linear lighting.

Larson Electronics, LLC    Kemp, TX 75143
May 09, 2012 Equipped with 70 W LED lamp using CREE XLamp MC-E® LEDs, Model Epljh-70led-1224I-100 produces over 6,000 lumens in wide flood pattern. LED assembly is contained within explosionproof aluminum housing with ¾ in. thick thermal shock- and impact-resistant tempered glass lens. Mounting system consists of aluminum J-bracket that adjusts from 26-34 in. Using inline waterproof transformer to convert 120 Vac to 12 V, light includes 100 ft of chemical- and abrasion-resistant cord.

Larson Electronics, LLC    Kemp, TX 75143
May 09, 2012 Mounted on vertically and horizontally adjustable telescoping pole made of non-sparking aluminum, EPL-PLM-1x150LED-50 has 16 in. dia LED light head that produces 10,000 lm in wide flood pattern capable of illuminating work areas up to 8,000 ft². LED light head, also constructed of non-sparking aluminum, has LEXAN lens and offers 60,000 hr LED lamp life. Approved for Class 1 Division 1 and 2 as well as Class 2 Division 1 and 2 locations, light can mount to walls and other flat surfaces.