Pass & Seymour/Legrand
Syracuse, NY 13221
Oct 01, 2009 Available in 3- and 4-wire models, Titan(TM) Commercial Dimmers are used with 120 and 277 V fluorescent dimming ballasts. Units feature surge and static protection, power failure memory, enclosed slider, and matte finish. Low end output voltage can be adjusted without compromising slider's full dimming range. Offered in single pole slide-to-off and single pole/3-way preset versions, dimmers come with all parts needed to build screwless multi-gang faceplate in field.

LSI Computer Systems, Inc.
Melville, NY 11747
Aug 28, 2009 Supplied in 8-pin DIP and SOIC packages, LS7636/LS7636FO/LS7637/LS7637FO are lighting control ICs turn on drive transistors at zero-crossover point of each half cycle to enable slow current rise. Current is terminated later during half-cycle, depending on desired dimming level, and RFI generation is minimized since power to load is not turned on abruptly. Able to drive any Electronic Transformer, ICs offer 3 selectable operating modes and support local or remote pushbutton control.

Crestron Electronics, Inc.
Cresskill, NJ 07626
Feb 09, 2009 With ability to handle manage 120, 230, or 277 V loads up to 16 A, CLS-EXP-DIMU universal dimmer expansion module enables Crestron iLux(TM) integrated lighting systems and lighting dimmers to add reverse phase type loads. Five expansion modules can be connected to single iLux dimmer channel. Wall-mountable unit supports both forward and reverse phase type loads, including electronic low-voltage, magnetic low-voltage, incandescent, neon/cold cathode, or 2-wire dimmable fluorescent.

Crestron Electronics, Inc.
Rockleigh, NJ 07647
Feb 05, 2009 Model CLS-EXP-DIMU universal dimmer auto-detects dimmable load type and selects appropriate operating mode to control load, simplifying installation. It manages 120, 230, or 277 V loads up to 16 A, accepting both forward and reverse phase types including electronic/magnetic low-voltage, incandescent, neon/cold cathode, or 2-wire dimmable fluorescent. Supporting up to 5 expansion modules, it can be installed above suspended ceiling or be wall-mounted.

Leviton Manufacturing Co., Inc.
Melville, NY 11747
Jan 07, 2009 Without requiring any new wiring, self-powered occupancy sensors, remote switches, wall switches, and integrated wireless receivers automatically turn lights on when occupancy is detected and off when room is no longer occupied. Products leverage EnOcean wireless technology and integrate solar cell that eliminates need for batteries by providing power from ambient light in room. Also included, automatic shutoff feature lets users set time-to-shut-off to match precise requirements.

Pass & Seymour/Legrand
Syracuse, NY 13221
Oct 31, 2008 LS Series Slide Dual Dimmer features two 300 W, single-pole, slide-to-off dimmers and installs in one gang box. LS Series Decorator Preset Dimmer with Independent Switch comes with single-pole, 3-way preset dimmer and single-pole, 3-way switch functions. LS Series Dual Fan Speed/Dimmer combines single-pole, 3-way preset dimmer and single-pole, 3-way preset de-hummer fan speed control. All controls support optional locator light via installation of Trade Master Snap-In Light Module.

Pass & Seymour/Legrand
Syracuse, NY 13221
Oct 28, 2008 Able to operate single pole or 3-way circuits, Harmony Dimmer includes captive paddle on/off air-gap switch, preset dimmer slide, green LED locator light, and EMI/RFI reduction circuitry. It can handle up to 8 A total load in single and 2-gang installations, and features adjustable low-end trim pot and power failure memory. Available in matte finish, product comes in white, ivory, light almond, black, and brown.

Power-Save Energy Co.
San Luis Obispo, CA 93401
Sep 11, 2008 Designed as direct replacement of existing wall switch, Fluorescent Light Manager controls all non-dimmable and dimmable CFLs, as well as fluorescent linear tubes with non-dimmable ballasts. Initial adjustment for size of light load and dimming can be preset to customer's preference. Unit is suitable for single-phase, 120 V/60 Hz, 300 W loads and meets safety standards for Solid-State Dimming Controls, ANSI/UL 1472 First Edition, and CSA-C22.2 No. 184-96.

Lamar Lighting Co., Inc.
East Farmingdale, NY 11735
Aug 07, 2008 Max-E Series high-efficiency recessed troffers, offering individual user control, utilize Switch-smart self-powered wireless switch technology. Helping to meet LEED® Credit 6.1, individual luminaires can be turned on/off or dimmed via wireless self-powered remote controls or rocker switches. Switches, which do not use any batteries or wires, can be installed anywhere on any surface and offer maximum range of 150 ft.

Pass & Seymour/Legrand
Syracuse, NY 13221
Mar 28, 2008 Suited for multi-gang installations, Titan(TM) Commercial Dimmers include 1,600 and 2,000 W incandescent units, 1,600 Va magnetic low voltage dimmers, and wallbox-mounted products for 2-wire dimmable fluorescent ballast applications. Each comes with parts need to build screwless multi-gang faceplate in field, and voltage adjustment feature that allows At-Full voltage to be reduced without compromising slider's full dimming range. Dimmers work with single-pole and 3-way wiring and switches.

LEDtronics, Inc.
Torrance, CA 90505
Nov 27, 2007 Suited for use with all 12 Vdc LED products, LED-DIMMER-001 offers continuously adjustable LED dimming range is 0-100% of input. One unit can dim supplied power for entire lighting channel or up to 2 A, 24 W max of LED bulbs, floodlights, tube lights, and light strips. Operating on 10-15 mA no-load current, solution does not add extra load to lighting circuit and is capable of driving up to 2,000 standard white discrete LEDs or 50 high-flux LEDs.

Pass & Seymour/Legrand
Syracuse, NY 13221
Nov 02, 2007 Featuring 700 W, 1,100 W, 700 VA, and 1,100 VA ratings, Harmony Dimmers combine ergonomic on/off paddle switch with separate slide control, which enables users to preset their desired lighting level. Available in ivory, light almond, white, black, and brown colors, they have constant memory that restores previous lighting level after power outage, and green LED that glows when dimmer is off for easy location in dark.

Ad Hoc Electronics
Orem, UT 84058
Jun 12, 2007 Eliminating need to cut hole in wall and run wire to new switch location for dimming control installation, wireless plug-in dimmer E8R-D12GP-1 can communicate with self-powered and wireless light switches, and can be installed and configured in less than 5 min. As light switch operates independently from batteries and wires, it can be mounted anywhere on walls within range of dimmer receiver.

Pass & Seymour/Legrand
Syracuse, NY 13221
May 02, 2007 Titan(TM) Commercial Dimmers come with all parts needed to build screwless multi-gang faceplate in field. In addition to customizable wall plate system and clear window slots for labels, products also offer voltage adjustment feature that lets building managers reduce at full voltage without compromising slider's full dimming range. All 700 and 1,100 W incandescent and magnetic low-voltage versions work with standard single-pole and 3-way wiring and switches.

Pass & Seymour/Legrand
Syracuse, NY 13221
Jul 06, 2006 Designed with contemporary styled knob, line of Rotary Dimmers come in 600 and 1,000 W versions with pre-set and lighted options for each. Dial on/off 600 W Dimmers are activated by rotating knob, while Pre-set 1,000 W Single Pole and 3-way Dimmers turn on when knob is pushed in. Measuring 1.24 in. deep, products are offered in light almond, ivory, and white.

Pass & Seymour/Legrand
Syracuse, NY 13221
May 16, 2006 Allowing for separate fan and light control, DEFL44L Decorator Fan/Light Combination Switch enables users to choose from 20, 40, or 60 min fan time delays. Green LED light facilitates location of On/Off light switch in dark. Available with ivory, light almond, and white overlays, switch is rated for 120 V, 500 W/4.4 A max, and is useful in bathrooms where proper ventilation ensures sanitary conditions.

Cole Hersee Co.
Boston, MA 02127 2467
Apr 11, 2006 Suited for various vehicle applications, 74600 Series Universal Electronic Dimmer Switches enable panel and interior lights to be set at varying intensities. Products are available in sealed case with O-ring seal in shaft. Imprinted with SAE variable symbol, universal switches come with variety of terminations: wire, AMP connector, and Packard connector.

Cole Hersee Co.
Boston, MA 02127 2467
Mar 15, 2006 Suited for crane, vehicle, and utility applications, self-contained MiniBus(TM) digital multiplex system is specifically designed for switching high-amp dc motors and operation of lighting on vehicles. It minimizes wiring as units are linked by single electrical cable. If needed, multiple loads can be added to system.

Pass & Seymour/Legrand
Syracuse, NY 13221
Nov 16, 2005 TradeMaster® Dimmers meet California Residential Title 24 standards for energy conservation, which require that households use high-efficiency lighting, vacancy sensors, and dimmers. They accept TM8 light module, which transforms any Decorator Combination device into illuminated product. Both single slide and dual slide units come in 600 and 1,000 W and are available in white, light almond, and ivory.

EnOcean GmbH
Oberhaching D-82041  Germany
Apr 20, 2005 EnOcean-enabled Switches scavenge minute amounts of energy when they are pressed on, then use that energy to transmit RF signals up to 10 mW to wirelessly control lighting. Systems are comprised of battery-less switches, dimmers, and receivers that are integrated into lights or controllers and signal repeaters, eliminating need to run cable from switch to light or controller. One switch can control one or multiple lights, and multiple switches can control one light.