Watt Stopper, Inc., The
Santa Clara, CA 95050
Oct 26, 2007 Suited for areas with small lighting control zones, Model LI-ARP provides 2 relay outputs to support bi-level switching and manual-on operation. It can also accept inputs from occupancy sensors and daylighting controls. By providing terminations for loads as well as for control inputs, LI-ARP eliminates multiple runs of line voltage and control wiring back to central panel location. Controller communicates with Lighting Integrator Complete Control System via single data line.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
Oct 17, 2007 Designed to operate two 28 W T5 fluorescent lamps, Optanium® Ballast incorporates programmed start lamp ignition to extend lamp life in frequent switching applications, and IntelliVolt® technology, which enables ballast to operate at 120-277 V, 50/60 Hz. Safety features include auto restart and ballast shutdown mode. Available in .95 and 1.15 ballast factor options, unit operates from any line voltage switching device such as toggle switches and occupancy sensors.

IEPC Corp.
Huntington Beach, CA 92649
Sep 19, 2007 Combining solid-state electronics with on-site, remote, and aggregate Web-based controls, Vari-Ballast Control (VBC) includes electronic ballast and microprocessors to regulate current flow. Lamp and fixture maintenance is achieved by using built-in scheduler, timer, relay, and dimmer. Measuring 6 x 6 x 4 in., Model VB400 features 90-300 V universal input voltages, 14-430 W variable output wattages, and controlled start-up and shut-down.

Universal Lighting Technologies
Nashville, TN 37214
Aug 13, 2007 Switching from full to half output via wall switch or lighting relay, Ballastar® T5 (part no. B214PU115S50A) has ballast factor of 1.15 and can operate one or two F14T5 lamps. It provides max light output for 2-by-2 fixture applications and illuminates entire area evenly. Operating from 120-277 V, 50 or 60 Hz, ballast includes end-of-lamp-life shutdown circuitry with auto re-strike for safe operation and exhibits less than 10% THD at full brightness.

Cooper Lighting
Peachtree City, GA 30269
Jul 30, 2007 Series 505 ceramic metal halide track lampholders for multiple Halo track systems provide an energy efficient alternative to halogen sources. Features include track aligned die-cast extruded aluminum ballast housing, lockable tilt and rotation, lampholder locking tab, matching integral on-off switch, and silicone beam adjustment knob. Accepts 20 W MR16, 39 W and 70 W PAR30, or T6 CMH lamps.

Fairchild Semiconductor
San Jose, CA 95134
Jul 27, 2007 Available in Pb-free packages that meet or exceed standard J-STD-020C requirements, Models FAN7710 and FAN7711 feature built-in adaptive ZVS control, 15 V shunt regulator, HVIC, and UVLO function. Suited for CFL designs, Model FAN7710 includes one high-side 625 V gate driver circuit, two 550 V MOSFETs, and frequency control circuit. Model FAN7711 integrates all but 2 MOSFETs offered by Model FAN7710, and suits LFL designs as well as CFL applications.

Edmund Optics
Barrington, NJ 08007
Jul 10, 2007 Suited for OEMs, TechSpec(TM) rods use total internal reflection to turn non-uniform light source into uniform illumination and deliver it to target site. Because homogenizing effects of traveling through rod are not wavelength or entry-angle dependent, rods can mix light from multiple sources into uniform beam. This allows OEMs to use rods to combine light from several LEDs to increase illumination intensity or to mix colors for unusual spectral characteristics.

Leica Geosystems Inc.
Norcross, GA 30092
Jul 02, 2007 Offered as Corner Cube reflector alternative, Break Resistant Reflectors (BRR) work with all models of Leica Laser Tracker in full range up to 40 m. One-piece stainless steel design, with collar around its optic aperture, facilitates handling and provides overall protection. Solution comes in 0.5 and 1.5 in. sizes, with centricity of ±0.0004 in. and respective weights of 0.25 and 6.88 oz. Use does not incur nor require continuous interferometer tracking.

Ad Hoc Electronics
Orem, UT 84058
Jun 12, 2007 Eliminating need to cut hole in wall and run wire to new switch location for dimming control installation, wireless plug-in dimmer E8R-D12GP-1 can communicate with self-powered and wireless light switches, and can be installed and configured in less than 5 min. As light switch operates independently from batteries and wires, it can be mounted anywhere on walls within range of dimmer receiver.

IEPC Corp.
Huntington Beach, CA 92649
Jun 06, 2007 Model VB400 lighting control system utilizes solid state electronics with on-site, remote, and aggregate Web-based controls for HID lighting. Designed for efficient energy management, system features electronic ballast, microprocessors for flow regulation, dimming and timing controls, automatic maintenance scheduler, and built-in photo cell for automatic daylight harvesting. System is compatible with all 200-400 W bulbs.

IEPC Corp.
Huntington Beach, CA 92649
May 31, 2007 Featuring solid-state electronics, Model VB400 enables automatic, manual, and remote control to provide HID lighting that is energy efficient and can be integrated into demand-response scenario. It replaces magnetic ballasts, timers, relays, control panels, photo cells, and intensive wiring required to connect each fixture to all external parts. Featuring plug-and-play design, Model VB400 enables use of 200-400 W bulbs no matter what manufacturer, HID type, or input voltage.

American Ballast
Fremont, CA 94538
May 30, 2007 Designed for use in ENERGY STAR®-compliant fixtures, T5/HO series is suited as retrofit and replacement for HID systems used for various commercial and industrial fluorescent lighting applications. Series includes 2-, 3-, and 4-lamp ballasts, all of which accept universal input voltage from 120-277 V (108-305 V) and feature program start function that promotes lamp life. There are also ½ and ¾ lamp configurations designed to withstand elevated operating temperatures.

Universal Lighting Technologies
Nashville, TN 37214
May 24, 2007 Model B232PUS50-A Ballastar® light-level switching ballast for T8 lamps provides light level control by switching from full light to 50% power using standard wall switches or relays allowing for easy compliance with ASHRAE 90.1 and California Title 24 switching requirements. Model B232PUS50-A complies with CEE requirements for high performance T8 lighting, operates 1 or 2 F32T8, F25T8, or F17T8 lamps, and has a light ballast factor of .88.

Pass & Seymour/Legrand
Syracuse, NY 13221
May 02, 2007 Titan(TM) Commercial Dimmers come with all parts needed to build screwless multi-gang faceplate in field. In addition to customizable wall plate system and clear window slots for labels, products also offer voltage adjustment feature that lets building managers reduce at full voltage without compromising slider's full dimming range. All 700 and 1,100 W incandescent and magnetic low-voltage versions work with standard single-pole and 3-way wiring and switches.

Reelcraft Industries Inc.
Columbia City, IN 46725
Apr 12, 2007 Constructed from impact-resistant composite materials, Series LG medium-duty industrial power and light cord reels can be mounted overhead, on wall, or detached from mounting bracket for complete portability. Units feature adjustable cable stop and circuit breaker that can be reset. Accommodating up to 50 ft lengths of 16/3, 14/3, and 12/3 diameter cable, reels help make workplace safe by keeping electrical cords up and out of harm's way.

Ad Hoc Electronics
Orem, UT 84058
Mar 28, 2007 Offering alternative to wired solutions when installing lighting control into existing buildings, Ad Hoc wireless lighting control systems consist of transmitters (switches) and receivers that are wired between light and power-source. One switch can be configured to control unlimited number of lights and generates its own electricity using EnOcean's energy-harvesting technology.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
Mar 06, 2007 Designed for use with 24 W T5 High Output and 24 W Long Twin Tube fluorescent lamp applications, Mark 10® Powerline measures 16.7 x 1.18 x 1 in. and features IntelliVolt® technology for operation at 120-277 V, 50/60 Hz. Ballast delivers 100-5% continuous dimming capability and takes dimming signal directly from power line to eliminate need for additional control wiring. Operation above 40 kHz minimizes risk of interference problems, and THD is less than 10%.

Tiffen Co. LLC, The
Hauppauge, NY 11788
Feb 22, 2007 Used in studio or on location, 5 'N 1 Multi-POPS reflectors work with tungsten, flash, or natural light. Combinations of silver/white, gold/zebra (gold and silver zigzag pattern), and translucent surfaces are available. Offered in in 32 and 42 in. dia, products feature steel frame and wear-resistant fabric to withstand daily use. Various colors can be used to soften or warm scenes, fill shadows, boost highlights, heighten contrast, or diffuse light.

Universal Lighting Technologies
Nashville, TN 37214
Jan 04, 2007 Designed for F96T12HO lamps, Basic-12(TM) Model B295SRUNVHP replaces traditional magnetic T12 high-output ballasts in existing or new fixtures. Featuring universal input voltage of 120-277 V, unit provides 21 W savings when replacing magnetic ballast operating two F96T12HO lamps. Basic-12 is lighter than magnetic ballasts but has same mounting dimensions and wiring, and can also operate F48, F60, F72, and F84T12HO lamps.

Siemens AG
Munich D-80333  Germany
Dec 14, 2006 Without requiring separate control block, instabus/Dali gateway N141 can implement lighting effects such as running lights or color washes for building facades and store display windows. Up to 64 Dali ballasts can be switched and dimmed via Gamma instabus. With Dali gateway, all Dali electronic ballasts can be controlled individually or in groups. N-system housing has size of 4 module widths, and connection to bus is via bus terminal or contact system.