Larson Electronics, LLC    Kemp, TX 75143
Nov 27, 2012 Constructed of heavy-duty aluminum tubing, 6,000 Watt Model CM-4X15M-25-480V-3P is equipped with four 1,500 W adjustable metal halide light heads that can be independently positioned in any direction. System can be used from ground or elevated via crane for work site area illumination. Larger floodlight systems including as many as 24 light heads, alternative voltages, and low wattage LEDs are available in similar configuration.

Everlight Electronics Co. Ltd.    TAIPEI   Taiwan
Nov 26, 2012 Driven by packaged IC, ELMM-457SURCB/A3 can be directly interfaced with microprocessor and has serial IC interface that allows display of 104 built-in characters and 24 custom, user-defined characters in 5 x 7 pixel format. LED sources of this programmable, 4-digit alphanumeric module display with flat height of 6.5 mm are configured in 140-dot, 4 x 5 x 7 matrix. Along with brightness controls, features include 3.3 V operating voltage, serial input, and 128 character ASCII format.

Osram Sylvania, Inc.    Danvers, MA 01923
Nov 26, 2012 Producing similar lumen output and distribution pattern to incandescent bulbs, 100 W ULTRA LED omnidirectional A21 bulb consumes 20 W, has CRI of 80, and produces 2700K warm white color temperature. Construction is free of both mercury and lead (Pb), and rated life is up to 25,000 hr. Dimmable to 10%, LED bulbs accommodate needs of residential, commercial, hospitality, healthcare, and retail applications.

Larson Electronics, LLC    Kemp, TX 75143
Nov 21, 2012 Certified for hazardous locations, Model EPL-24BS-1X4-100 is equipped with 400 W metal halide lamp that produces 36,000 lm in wide beam pattern capable of reaching up to 200 ft in length. Portable explosion proof unit features removable light head measuring 23 7/8 in. in  diameter and aluminum lamp guard that protects against impact and debris. Supplied with 100 ft of SOOW cord, light is suited for illuminating interior of large containers, tanks, and ship holds during cleaning/maintenance.

MaxLite    West Caldwell, NJ 07006
Nov 21, 2012 Featuring second generation LEDs, DesignLights™ Consortium (DLC)-certified Edge Lit LED Flat Panels deliver energy efficiency approaching 100 lm/W for office, school, hospital, and medical facility applications. These alternatives to fluorescent fixtures for lay in or T-grid ceilings are available in 3500K and 5000K CCT. While 1 x 4 ft and 2 x 2 ft models use 45 W, 2 x 4 ft model uses 50 W. All models have aluminum housing and back panel, translucent white polycarbonate lens, and color-matched LEDs.

Precision-Paragon [P2]    Yorba Linda, CA 92887
Nov 21, 2012 Consuming 135 W, QHC uses LED technology to provide 12,483 lm. Size and weight of 2-piece cast aluminum housing facilitate installation and maintenance, while integrated vertical heat sink structure with flow-through cooling reduces LED junction temperatures for reliability. Integrated intelligent controls, featuring instant re-strike and occupancy sensors, can reduce energy usage, and optics ensure even distribution of light with max/min ratio to meet IESNA light level standards.

Thomas Research Products    Huntley, IL 60142
Nov 20, 2012 Working with 2 standard wall switches, SD1 module offers bi-level dimming control for LED luminaries. Product works in conjunction with any 0-10 V dimmable LED driver, from any manufacturer. Intended for indoor use, step-dimming module features 100-277 Vac universal voltage input and low insertion loss. It is suited for use when switching between 100% and 50% output is required, such as occupancy sensor applications.

Magnaray    Sarasota, FL 34243
Nov 20, 2012 Comprised of 5 models, Full Cutoff Outdoor Area Lighting Arrays are outdoor, cantilevered, pole-mount luminaires that produce direct, downward, low-glare fluorescent light. Symmetric and asymmetric lighting designs, offering 5 lighthead choices and 4 wattage options, are constructed from clear anodized aluminum and feature impact-resistant clear acrylic lenses and internal aluminum reflector. Choice of 2, 3, or 4 horizontal fluorescent light housings project beyond support fulcrum.

Metaphase Technologies Inc.    Bensalem, PA 19020
Nov 20, 2012 Compact, UL-certified LED Line Light projects thin strip of concentrated light onto object and offers high uniformity both laterally and longitudinally. Available in 5-20 in. sizes, Gen4 Line light features air cooling channel and vortex cooler allowing it to withstand heat. Product is suitable for line scan camera applications.

Metaphase Technologies Inc.    Bensalem, PA 19020
Nov 20, 2012 Metabright™ Ruggedized Area Front Light, MT-FL300X150, provides 11 x 6 in. of 7,200 lm, 6,000°K white lighting. It can be used alone or in pairs, or positioned for on-axis or off-axis illumination depending on lighting needs. Featuring black anodized aluminum housing, unit is shock- and vibration-resistant and has passive thermal conduction cooling. Weatherproof, low energy consumption light is suited for night inspection, low daylight, and outdoor or spray applications.

Meyda Tiffany    Yorkville, NY 13495
Nov 19, 2012 Measuring 36.25 in.² and 21 in. in height with square-shaped skirt and canopy, Whitewing Flushmount Model 138445 features white acrylic lens with Mission-like design accented with solid steel lines, borders, and hardware. Unit is available in variety of finish colors and textures. Suitable for kitchens, dining areas, restaurants, and lounges, fixture supports energy-efficient LEDs and CFLs, as well as standard halogen and incandescent bulbs, depending on requirements.

Larson Electronics, LLC    Kemp, TX 75143
Nov 16, 2012 Approved for Class 1, Division 1 hazardous locations, ATX-20-SE Explosion Proof HID Flashlight produces 1,200 lumens with color temperature of 6,500 K, and throws light beam up to 2,500 ft long. Flashlight has 4,800 mAh Li-Ion battery allowing it to run for approximately 140 min on full charge. Aluminum body is covered with black anodized finish for durability and is sealed for IP68-rated waterproof protection. Unit is suitable for use by utilities and emergency responders.

Larson Electronics, LLC    Kemp, TX 75143
Nov 16, 2012 Suitable for hazardous areas, Model EPL-21-IRLED produces 40° flood beam that is approximately 160  x 125 ft. Unit is available in 850 Nm configuration for use with general night vision devices and security cameras, or 940 Nm version for use with military night vision equipment. For low voltage operation, light has in-line step down transformer to convert 110–277 Vac to 12 V. Model EPL-21-IRLED is constructed with copper-free aluminum shell and impact-resistant tempered glass lens for durability.

LEDtronics, Inc.    Torrance, CA 90505
Nov 16, 2012 Available in configurations that consume 5 or 7 W that respectively replace CFLs up to 13 or 23 W, LEDGX23D, LEDG24Q, and LEDG24D series support voltage ranges of 120–240 and 240–277 Vac and come in 2800K Halogen White, 3200K Warm White, or 4100K Natural White. Available base styles include dual- or quad-pin GX23, G24Q, and G24D, shock-resistant lamps provide 350–575 lm of directional light and at viewing angle of 110°. Clear acrylic lens cover shields lamps against accidental impact.

Banner Engineering Corp.    Minneapolis, MN 55441
Nov 16, 2012 EZ-LIGHT® K80FL delivers distinct, even lighting and comes in 9 colors, while K80FDL provides bright, intense light suited for outdoor use and comes in 6 colors. Featuring flat face sized to deliver clear, discernable status indication up close or over extended distances, both models can display up to 3 colors in one unit and have internal DIP switch to change from solid or flashing light operation. Gray off position eliminates false readings from stray light.

Larson Electronics, LLC    Kemp, TX 75143
Nov 13, 2012 Industrial-grade 400 W EPL-PM-1X400MH-100 Metal Halide Hazardous Location Light produces 36,000 lumen flood beam and illuminates 25,000 sq ft work area. Approved for Class 1 Division 2 locations, integral lamp has weatherproof cast aluminum housing with heat- and impact-resistant glass door. Ballast, sealed within assembly's housing, operates on voltages of 120-277 Vac. Product also includes pedestal base for stability and adjustable bracket for vertical positioning.

Larson Electronics, LLC    Kemp, TX 75143
Nov 13, 2012 Measuring 4 ft long and fitted with 2 LED lamps, Model HAL-SA-48-2L-LED carries UL approval for Class 1 Division 2 areas where gases and vapors may be encountered, as well as UL 1598A Marine Type approval for wet offshore locations. Housing is constructed from non-sparking aluminum and LED bulbs are sealed within housing with powder coated aluminum frame and shatter- and heat-resistant acrylic lens. Fixture can be configured to run on 120–277 Vac as well as 12/24 Vdc.

Caltron Industries, Inc.    Fremont, CA 94538
Nov 13, 2012 Featuring 1,500 nit LED panel, HBT-1704O offers 1,280 x 1,024 (SXGA) max resolution, 1,000:1 typ contrast ratio, 80% min uniformity, and 5 msec response time. This 17 in. open frame monitor, with backlight MTBF of 50,000 hr minimum at 25°C, can display 16 million colors and offers viewing angles of ±85° left/right, +80° up, and -80° down (typ at CR=10). Also available with touch options, product is suited for direct sunlight and industrial applications.

OSRAM Opto Semiconductors GmbH    Regensburg D-93049  Germany
Nov 12, 2012 Based on UX:3 chip technology with silicon converter, Oslon LX produces 125 lm from 350 mA current at temperature of 25°C in chip. At 100°C, LED achieves luminous flux of 100 lm. Housed in 3 x 3 mm² package, LED has beam angle of 120° and typical CCT of 6,500°K, making it suitable for automotive daytime running lights and fog lights. Low-beam and high-beam applications are also possible using combination of several Oslon LX LEDs.

Cooper Lighting    Peachtree City, GA 30269
Nov 12, 2012 Intended for seamless integration within new or existing parking garage, canopy, stairwell, and low-bay installations, Lumark Quadcast™ can replace traditional HID, fluorescent, and induction light sources. Four 4,000K CCT LED optical panels rotate 150° and adjust in 15° increments to provide aiming and control needed to meet horizontal and vertical footcandle illumination requirements. Consuming 56 W, luminaire delivers 4,365 lm and maintains greater than 90% initial output after 60,000 hr.