OSRAM Opto Semiconductor    San Jose, CA 95134
Apr 21, 2009 With 6 thin-film chips and hemispherical lens, Infrared OSTAR LEDs are available in 2 wavelengths. At 850 nm, SFH4750 is optimized union of maximum spectral sensitivity for CCD and CMOS cameras with suppressed visibility for human eye. SFH4751 has 940 nm wavelength to which human eye is almost insensitive, making it suited for applications where visibility of light source must be eliminated. Beam angle and radiant intensity of both models can be varied with standard secondary optics.

Waldmann Lighting Co.    Wheeling, IL 60090-6051
Apr 20, 2009 Energy efficient FLAT TEC fluorescent flood light is available in built-up (at 1.65 in. in height) or flush versions, and attaches directly onto machine wall, incorporating itself into components of machinery. It is waterproof, utilizes T5HO technology to produce high luminous flux rate, and is IP69K rated. Available in high- or low-voltage versions, product can be sprayed, splattered, and submerged in most volatile machine environments.

Compaction America, Inc.    Kewanee, IL 61443 1714
Apr 20, 2009 Economizer system features vibration sensor and computing unit/LED display that provides continuous, real-time feedback of soil stiffness. Display indicates to operator level of compaction achieved and highlights soft spots in material. Helping to avoid unnecessary passes and minimizing fuel consumption and machine wear, it is available as standard on BOMAG BPR100/80D compactor and optionally on BPR45/55D, BPR55/65D, and BPR65/70D machines.

CAPRI LIGHTING    Tupelo, MS 38804
Apr 20, 2009 Including junction box that can be positioned on either right or left side of luminaire, QuickLights® 180 downlight can be installed in less than 30 sec with Quick Plug feature. Featuring convertible IC/Non-IC dual rated housing, device is IC rated up to 90 W and Non-IC rated up to 150 W for incandescent and up to 26 W for compact fluorescent lighting. Unit is Airseal(TM) rated to ASTM E283 standards of less than 2.0 cfm.

Schreder Lighting LLC    Elk Grove Village, IL 60007
Apr 17, 2009 Comprised of luminous columns, bollards, luminaires, and wall fixtures, Nemo Family of outdoor light fixtures feature Sealsafe® optical compartment and are constructed of impact-resistant stainless steel and aluminum. Lenses, constructed of injection molded clear acrylic, are permanently sealed to reflector, and ballast module pivots out for simplified replacement or service. Units are wet location-listed per UL1598 and CSA C22.2 with IP rating of 66.

W2 Architectural Lighting    Garden City, NY 11530
Apr 17, 2009 VAMP LED Spotlights feature heavy-duty, die-cast aluminum construction, with heat sink and housing design that ensure heat is transferred away from LEDs. Junction box temperature is lower than LED manufacturer-rated operating temperature, optimizing thermal management. Units include aiming indicators and are lockable and adjustable in field without tools, with 350° horizontal rotation and 90° vertical tilt for aiming. LED Spotlights are offered as 9, 18, and 30 W models.

W.A.C. Lighting Company    Port Washington, NY 11050
Apr 16, 2009 Measuring 11 5/8 in. tall x 6 in. wide, Solstice energy-efficient line voltage pendants feature blue, brown, and red colored hand blown glass. Products include compact fluorescent 13 W, self-ballasted lamp, rated at 2,700 K, and mounting is available in various finishes. Pendants come with shade, adapter, and socket set, featuring 96 in. braided fabric wire that can be shortened in field.

Meyda Tiffany    Yorkville, NY 13495
Apr 15, 2009 Designed for large interior spaces, Cilindro family model 99663 custom fabric pendant features transitional appearance that blends with any interior decor. Pendant features fabric shade with white acrylic diffuser on bottom. Variety of lamping options are available.

Philips Lighting Co.    Somerset, NJ 08875
Apr 15, 2009 Available in 3,000, 3,500, and 4,100 K color temperatures, 29 and 31 W fluorescent T8 U-Bent lamps are suited for 2 x 2 fixtures within variety of retail, office, school, and hospital settings. Featuring high lumen maintenance of 95% and CRI of 85, unit delivers 30,000 hr of rated average life at 12 hr per start and 24,000 hr of rated average life at 3 hr per start on electronic instant start ballasts. Measuring 15/8 in., units are environmentally sustainable.

W.A.C. Lighting Company    Port Washington, NY 11050
Apr 14, 2009 Delivering light beams free of projected heat and UV/IR rays, LEDme(TM) fixtures come in warm white 3,000 K, neutral white 4,500 K, or cool white 6,000 K color temperatures. Vents in unit dissipate heat, while threaded stem mounting allows for use on variety of mounting options, including wooden desk to harder surface. Available in brushed nickel, chrome, and black metal finishes, LED fixtures suit applications for residential, retail, museum, and jewelry store display lighting.

LEDs America, Inc.(TM)    Jupiter, FL 33458
Apr 14, 2009 Offering 2,000-2,400 lumens of light, Led-O(TM) LED tubes do not contain mercury, argon, xenon, neon or krypton gases, or emit infrared or ultraviolet radiation. With operating temperature between -40°C to 185°C, units are suited for applications requiring frequent on-off cycling, such as garages and basements. They do not change their color tint when dimmed, and light up immediately when switched on.

Dialight Corp.    Farmingdale, NJ 07727
Apr 09, 2009 Certified to FAA requirements, RTO Series of L-810 obstruction lights is available as single, dual, or retrofit unit for direct replacement of incandescent lamp/lens technology. DC version, running at 3.5 W, suits solar or battery backup applications, while AC version, runs at 6.5 W from 120-277 Vac, 50-60 Hz. Compliant with ICAO and Transport Canada requirements, solution utilizes high-flux LED technology and can be operated steady or flashed.

Meyda Tiffany    Yorkville, NY 13495
Apr 07, 2009 Suited for residential or commercial applications, 42 in. wide Tempo Mission Chandel-Air (108446) features art glass mission styled shade transformed into decorative / functional casement for fan. Adjustable unit can accommodate flat or vaulted ceilings of any pitch or height. It operates with two-circuit remote control with 3 speed fan control and dimming capabilities.

Ledalite Architectural Products    Langley V1M 3B2  Canada
Apr 03, 2009 Using solar power and kinetic energy to wirelessly communicate with light fixtures, Airwave Controls require no hardwires or batteries. Motion of pushing self-powered light switch captures enough kinetic energy to transmit wireless RF commands, allowing lights to dim or turn ON/OFF. Airwave photosensors, powered by integral photovoltaic cells, monitor ambient light levels and wirelessly signal luminaires to cut output and save energy when there is sufficient daylight.

Dialight Corp.    Farmingdale, NJ 07727
Apr 03, 2009 Manufactured with optical design that achieves compact, FAA-compliant L-864 device, D264 Series high flux LED-based, medium-intensity red beacon meets light pollution requirements of ICAO. Accubeam LED optic technology creates sharp cut-off beam to achieve almost zero light pollution at ground level while ensuring 2,000 candelas are still visible to aircraft. It can be flashed or steady burned and is designed to replace 300 mm incandescent obstruction lighting fixtures.

Dialight Corp.    Farmingdale, NJ 07727
Apr 03, 2009 Compliant to ICAO and DGAC standards, Flashing Dual (White/Red) Strobe is designed to suit any tower requiring medium-intensity L-864/L-865 dual lighting systems. All-LED solution is ETL-certified and has completely sealed flash head. Power supply/control box can be located at base of tower or up to 550 ft from light engine and is equipped with full diagnostics routines. While resistant to shock and vibration, beacon also features lightning protection to 2 MV/10 kA.

Grote Industries    Madison, IN 47250
Apr 03, 2009 Less than 1 mm thick, LightForm illuminates even when flexed, twisted, or rolled. This enables designers to bend lighting around corners, over contoured areas, and into complicated shapes for interior and exterior vehicle applications. Fully illuminated by handheld battery pack, thin-film, solid-state lighting device can achieve same FMVSS 108 photometric requirements for P2-rated marker lamp, with 2% of material used in traditional LED lamp, and mounts via peel-and-stick method.

Details    Caledonia, MI 49316
Apr 03, 2009 Used on and inside freestanding furniture, SOTO (state of the office) organizational and productivity worktools help minimize visual clutter of shrinking worksurfaces. Products include freestanding/rail-mount LED task light; boxes for storing, piling, and organizing; as well as shelves to hold documents, supplies, and personal items. Vertical display shelf can also serve as privacy barrier between workstations in open environments.

W.A.C. Lighting Company    Port Washington, NY 11050
Apr 02, 2009 Featuring die cast construction, LEDme(TM) Track Luminaires deliver strong projected light output without projecting heat, UV, or IR rays. Nine watt, 4,500 K unit performs like 50 W PAR 20/30 lamp, while 18 W 4,500 K LED model performs like 75 W PAR 30 lamp. Measuring 2¾ x 3 x 6 in. to 3½ x 3¾ x 7½ in., track heads are available with spot or narrow flood beam spreads. Units are suitable for residential, retail, hotel, and restaurant accent lighting.

American Ballast    Fremont, CA 94538
Apr 02, 2009 Multivoltage ballasts operate 1, 2, 3, or 4 T8 lamps at universal input voltage of 108-305 V. They feature parallel lamp operation, which enables them to continue operating normally if single lamp fails, antistriation control that creates even level of light output, as well as flicker-free operation. With minimum starting temperature of -18°C, ballasts offer power factor of greater than 90%, THD of 10%, and lumen output of 0.87.