Meyda Tiffany    Yorkville, NY 13495
Aug 10, 2009 Reproduced from antique Transitional Craftsman design, 14 in. wide Borough Hall Pendant (109137) is handcrafted with 12 panels of kiln-bent Revival White art glass and Craftsman Brown finished brass. It includes 5 in. wide ceiling canopy and 6 ft foot chain. Borough Hall collection is suited for large residential, commercial, and institutional applications.

Carmanah Technologies, Inc.    Victoria, BC V9A3S2  Canada
Aug 07, 2009 Featuring programmable interface, USB connection, and replaceable battery pack, Model M650 provides up to 4 nautical miles of visibility. Built-in intelligent deployment feature enables unit to automatically adjust optical intensity to suit solar characteristics of exact geographic location. Offering more than 256 flash patterns, RoHS-compliant lantern withstands impact, vibration, submersion, and temperature extremes, and comes in green, red, blue, yellow, and white.

Carmanah Technologies, Inc.    Victoria, BC V9A3S2  Canada
Aug 07, 2009 Featuring up to 10 candela intensity (steady-on) rating, self-contained A650 is available with blue, red, yellow, green, or white light outputs and includes 250+ flash patterns. On-board interface provides access to configurable settings, while built-in system status capability indicates overall battery health and geographical location. Also included, intelligent-deployment feature automatically adjusts optical intensity to suit solar characteristics of its exact geographic location.

Express Imaging Systems    Seattle, WA 98144
Aug 06, 2009 With peak intensity vertical angle of 53°, Clearlight 40 W Wide Optic LED Luminaire delivers light in evenly dispersed, NEMA Type 5 circular pattern, making it suited for parking lots and roadways. Unit is designed for use in 50-175 W Mercury Vapor or 70-150 W High Pressure Sodium mogul base, dusk-till-dawn fixtures. Clearlight contains no mercury and is dark-sky friendly with full cut off.

Cooper Lighting    Peachtree City, GA 30269
Aug 04, 2009 Suited for both interior and exterior applications, Metalux VT4 Series is available with 4 or 6 T5 or T8 lamps, offering medium or wide beam distributions. Code compliant pre-wired internal disconnect helps in disconnecting power during service and maintenance safely, and internal tethered gear tray allows toolless access to ballast compartment and hands-free maintenance. Fixtures can be chain or cable mounted. Series is UL/cUL listed, NEMA 4X, NSF listed, IP65 and IP67 certified.

Dialight Corp.    Farmingdale, NJ 07727
Jul 30, 2009 Operating on 150 W, powder-coated aluminum SafeSite® High Bay LED luminaire is designed to perform for more than 10 yr in demanding industrial and commercial applications. Fixture is completely free of hazardous materials, including mercury, and features rugged solid-state design that is shock and vibration resistant. Luminaire weighs less than 15 lb.

Wireworks Corp.    Hillside, NJ 07205
Jul 28, 2009 Suited for applications within AV industry, LumaVue Custom Panels can serve as both connection panels and identification plates with custom engraving including company name, logo, and contact info. Units can be rear illuminated, and are rear engraved using CIM engraving system, so marking cannot be marred or destroyed. Offered in 10 colors and with gloss or matte finish, panels will not rust or tarnish. They are manufactured in 1/8 or ¼ in. thickness to meet any design requirement.

AMETEK Solartron Metrology    Gastonia, NC 28054
Jul 28, 2009 Available in 3 models, SI1000 series panel mount display/controllers offer plug and play operation and have 7 digit red LED display that can be updated at up to 10 readings/sec. SI1100 model provides up to 0.1 µm resolution when used with Solartron's LVDT displacement and gauging transducers. With 4-20 mA and dc inputs, SI1300 suits applications where long cable runs are required, while SI1500 is designed for use with digital probes. Series has case size of only 96 x 137 x 48 mm.

Optek Technology, Inc.    Carrollton, TX 75006-6905
Jul 24, 2009 Available with white, warm white, blue, green, red, amber, and yellow LEDs, OVS5MxBCR4 Series LED package feature 120° viewing angle and water clear lens. Power dissipation at 150 mA is 0.48 W for white/warm white/blue LEDs; 0.51 W for green device; and 0.33 W for red/amber/yellow packages. Luminous intensity is 4,000 4,500, and 5,000 mcd for red/amber/yellow LEDs, respectively, while luminous flux for white/warm white/blue/green LEDs is 25, 25, 6, and 25 lm, respectively.

Holophane    Granville, OH 43203
Jul 24, 2009 Available with asymmetric and symmetric reflectors and refractors, High Mast Advanced Optix (HMAO(TM)) Series luminaires can be used with 400-1,000 W high pressure sodium and metal halide lamps. Luminaires are UL listed for 40ºC, wet locations, and they have open ventilated design to minimize dirt depreciation, unitized quick disconnect ballast assembly, and tool-less lamp replacement. Suitable applications include roadways, port facilities, airports, rail yards, and storage areas.

Bulbrite    Moonachie, NJ 07074
Jul 23, 2009 Providing energy efficient alternative to incandescent bulbs, Halogen-Xenon BT-15 lamps can be used in any retrofit or new construction installation where standard A-bulb is used. Lamps operate on 120 V, offer long life of 2,000 hr, and are fully dimmable. Compliant with California's Title 20 Lumen Efficiency Requirements, medium-base lamps can be used in recessed, wall mounts and sconces, outdoor and security fixtures, ceiling mounts, chandeliers, and portables.

Sunovia Energy Technologies, Inc.    Sarasota, FL 34243
Jul 23, 2009 Installed along roadways in new housings or retrofitted to existing cobra head housings, EvoLucia(TM) LED cobra head products reduce energy consumption, carbon emissions, and light pollution. There are no poisonous elements, such as mercury, and light aiming technologies lets fixtures focus on specific location. With anticipated lifetime of 12+ years under typical operating conditions, products support 25-30 ft mounting height and pole spacing of more than 5 mounting heights.

King Innovation    O'Fallon, MO 63366
Jul 23, 2009 Suitable for use in UL 1838 low-voltage landscape lighting applications, DryConn® UL 486D Listed Connectors offer optimal performance for low-voltage, waterproof splice protection and direct bury. Models include DryConn Black/White, Black/Gray, Black/Blue, King 4, King 5, King 6, King 9, and DBSR® Medium with strain relief. Wire range for entire line covers No. 22 through No. 6 AWG.

Streamlight, Inc.    Eagleville, PA 19403
Jul 23, 2009 PolyStylus® FiberWrap(TM) fiberglass polymer penlight has 5 mm shock resistant LED with 100,000 hr lifetime, providing 85 candela peak beam intensity and 9 lumens of output in white mode. Weighing 1.4 oz, penlight includes 3 AAAA-sized alkaline batteries, measures 6.68 in. long, and features pocket clip on end-cap. PolyStylus is available with single white, green, red, or blue LED, or as combo pack that includes white LED and 3 interchangeable green, red, and blue LED modules.

Innovations In Optics    Woburn, MA 01801
Jul 22, 2009 Accommodating 1-14 LED die from UV to near IR, LumiBright LE Boards incorporate ultra high brightness LEDs, several primary collection optics, and thermistor and photo-sensor options for real-time feedback loops of temperature and light intensity. Five collection optics provide optimized output solutions specific to end user applications, such as light guide and fiber optic coupling, projection lighting, and uniform far field illumination.

LEDtronics, Inc.    Torrance, CA 90505
Jul 22, 2009 Designed to replace T6 incandescent exit sign tubes, EXL-TPW Series outputs 21-25 lm of unfiltered, 5000K Pure White light using less than 1 W of energy. Solid-state design is impervious to shock, vibration, frequent switching, and environmental extremes, and average lifespan exceeds 50,000 hr (5.7+ years). Compliant with UL924 light output requirements, bulbs come in 3 standard base options, are rated for incoming voltages of 120 Vac, and are compatible with most standard exit signs.

JKL Components Corp.    Pacoima, CA 91331-2376
Jul 17, 2009 Available in variety of lengths up to 48 in., Alumiline series of LED light bars are designed for point-of-sale displays, stage and special effects lighting, and architectural ambient lighting applications. They come in 3 different white options and 5 colors: red, green, blue, amber and yellow, all with illumination angle of 120-degrees. Color options make RoHS Compliant series suitable for displaying articles, food cosmetics, jewelry, and exotic packaging.

Cooper Lighting    Peachtree City, GA 30269
Jul 15, 2009 Available with 5 or 6 in. aperture, Halo Eco-Twist(TM) Downlights feature spiral twist, multi-wattage ballast system from Osram Sylvania, allowing interchangeability of 16, 21, or 28 W lamps. Insulated ceiling housings are rated for direct contact with ceiling insulation and are also AIR-TITE(TM) to minimize air transfer. Designed to last over 10,000 hr, downlights accept low-profile Living Spaces lamps that feature R9 red, providing visual comfort and CRI of 86.

W.A.C. Lighting Company    Port Washington, NY 11050
Jul 15, 2009 INVISILED(TM) PALETTE changes color with chips that have 3 individually colored diodes, with changes programmed for optimal transition and adjustable speed among diodes. INVISILED AURA has similar diodes and offers color range from Amber to 5100k white. Using 1.5 W/ft, LED tapes are 1/8 in. thick and 7/16 in. wide and are backed with 3M adhesive or screw-based mounting clips. They feature temperature tolerance of -4 to +122°F and include remote or plug-in power options.

Cooper Lighting    Peachtree City, GA 30269
Jul 09, 2009 Ametrix Arrowlinear(TM) Series asymmetric lighting products provide uniform illumination to targeted surfaces with no stray light. Energy-efficient lamp options include various wattages of T5, T5 High Output, T5 Very High Output, T8, and T8 Very High Output. Fixtures are available in 2, 3, 4, 6, 8, and 12 ft lengths and can be mounted individually or in continuous rows in any horizontal mounting configuration. Integral ballast includes quick-disconnect to meet NEC and CEC code requirements.